Video není dostupné.
Omlouváme se.
Mustang GT Fly By And Burnout, UPR X and pypes M80s
Vložit
- čas přidán 28. 06. 2012
- Fixed the camera issue, so now you'll get the real sound. I put a little inside joke in there for some of my CAFords people lol.
Pypes M80s and UPR Off Road X-Pipe, 2004 mustang GT
when i think of mustangs this is how i think of them sounding. awesome dude
I come back ever so often to hear this thing. Sounds better than my sbc s10✊🏾
Man I just watched this a couple days ago for the 1st time in years lol. I miss it.
i have h-pype and just purchased these muffs. this vid has been the only legit vid ive found tht i really got to hear the tone of the muffs. looooove it, cant wait
About to install m80s and a off-road x behind my open long tubes this weekend. Can't wait to hear the sound
4v or 2v?
@@Mixtapejah 2v Bullitt motor. Trying to install intellitronix digital gauges right now and it's a job. Next to get some 2 step 😁
@@sategllib2191 you can do a fake "2 step" with an SCT tuner. You can set the rpm limit to like 3.5k and just the gas boiiiiiii lol!
sounds great on acceleration. sounds like a Jake brake on deceleration.
Kinda is isn't it?
Nicely done GT man! Seen it with the termi rear bumper and spoiler. Looks nasty! Love it man. Just picked up a 2003 GT convertible. It's got a 03-04 front cobra bumper on it. Def getting a cobra wing and rear bumper too. Abcexclusive sells a rear bumper without the cobra lettering. Your exhaust is raw man. Sounds sick. And I came across CCW lm20's. they are nice but not gonna pay 600 per wheel. So found the xxr's. either want 521's or 531's. clean ride dude!!
Cleanest mustang on CZcams bro. 10/10
That joint beastin bruh! Sound like you put some effort into it. Blessings Family!
After this video, I got M80's on the way lol. Was torn between LM1 and M80 but this is a must have. Cant wait to install mine.
Just ordered a pair of these mufflers for my 04 GT. Damn you! Make me spend my money! Lol. Sweet Mustang bro!
UPR off road X pipe and Pypes m-80 mufflers my man. and it was about only about $350 for all the parts and install.
there you go. those cats make a huge difference. I have an off road x-pipe.
Man loving the xxr 521!!! The polished lip would have looked a lil better but nice set up!!!!!!
Nice car, nice driving, nice exhaust note. I'm envious of your wheels/tires and 01 cobra bumper lol cars fuckin sick.
Look like something from XXR. I think like 521s? Not sure though
Sounds nice, im thinking of putting rather the m80s or the slp?
damn this stang goes hard man sounds to nasty when driving off keep it up man
thats why it sounds so nice. Thanks brotha for all the info.
do you need a tune after the cats are taken off? any difference in MPG?
Really nice mustang man and clean!
Sounds good
Those XXR's look good, never thought id see em on a domestic, kinda like CCW's
I was on youtube for about a year trying to figure out which exhaust I wanted. I'm just posting all this up to help people decide faster than I was able to lol.
Damn man our stangs look almost identical! Except I have cobra wheels and a bigger cowl hood. Black with no wing, everything's debadged, I have to upload one!
Ay bro, I just put them on, I have bbk shorty headers, o/r x pipe along with the m80s, how long do they need to be broken down?
Omg brah..were u find those and how much they cost..
Honestly there just hating because it sounds so fucking awesome, just convinced me to get some m80s on my 2000 gt!
Sounds like a BEAST!!!
sounds great.
So to run this i need m80 mufflers, upr x pipe, and mangnaflow tips? I get everything your saying just lost on the tips if you could help bro
Lol, not even close...but that boosted my ego a bit. thanks my man.
car sounds and looks awesomeee man
Uh I fell asleep😂
😂😂
Man, that sounds awesome!!
how loud is this set up in the car cruising at hyw speeds ?
hey i was thinking of putting Upr x on my mach1 what do u about smog? PM i wold like to know more on this subject thank u...ur cars Great Bro!
Swap the stock pipe back on before inspection, not that hard to do once you do it once.
such a beautiful car bru
Ok kool cus I'm suppose to get my pypes m80 mufflers tomorrow and ill save up some more for the x pipe
Damn thats 1 sweet mustang
***** American Muscle or late model restoration sells the o/r x you can get them a little cheaper than actually going to the upr website
I love this video !!
Love the sound, man how do you get away with this in California
This was years ago before they started trippin man. Idk how people are doing it now.
JaeHow23 Man I’m tired of my exhaust being so quite, I have 4 cats but idk if removing the last two cats would create an issue for smog.. and idk anyone with a hookup.. thanks for the response though
@@everyonewasstealingmynamea919 man I think if you have high flow cats you're good with smog but I could be wrong. Most cars will pass smog catless, but you have to pass a visual test that you'll fail without cars
@nx330mustang i have the mac and the only rattle i get is from my cat delete
Car looks good. Sounds good on start, idle and acceleration, but sounds V6-ish or import like on deceleration. I'm probably still going to buy this catback because its the only one in stainless steel for under $400 bones. The flowmaster catback under $400 doesn't even have polished tips. The Mac catback is in way too many pieces and I know it'll have issues rattling in the future. I run an older design MAC Catback now (has less slip-fittings and clamps than the new one) in full 3in, but it rusted inside and one of the chambers came loose and is rattling. If you run cats, always get stainless steel or else the condensation is going to rust out your exhaust over time. Mine has last 15 years, but I didn't put but maybe 40,000 miles on it.
+nx330mustang it's a 2v
+JaeHow23 Still rocking it? I think dudes like us need to coyote swap rather than buying a new GT... Our junk is less weight than the new GT's so if it'll hook it's going to be a 12 sec ride before mods!
It sounds v6ish cuz he has the x pipe and not H
it sounds like that because it's a 2V and not a 4V...
JaeHow23 well I wouldn't say that but you could be right. Could go both ways
No worries my man, good luck.
is this all shot around the elk grove area?
that's exactly why I got them. No one really has them...and they're similar and WAYYYYY cheaper than CCWs lol.
I love this Gt
Does yours get really quiet at 4-5000 rpm? I have the same setup and mine does that. I can't tell in the video if yours is doing that.
+Jacob Williams No, not that I remember...but i haven't driven it in about 2 years lol.
nice car man !
where did you get your rims from and what are they called?
What kind of rims do you have? Looking for some like those, i have bullit 315/17 but those look sick!
Sounds Beast
I just now saw this and it's WAYYYYY louder with the m-80s
Beautiful fcukin car dude
Niiiiiiiiiiiiiiiiice!!!!!!!! WHEEEEW!!
Brah hit me up ..love dat sound straight beast.
I love your wheels man what are they?
How did you do that thing with the semi burn out then take off
Press and hold the clutch down, hit the gas HARD and let off the clutch. You'll spin the rear (or front) tires.
What if I have an automatic
@@SCARxFACEE1 put that bitch in neutral, rev the engine to about 3.5-4k rpm and slap it into drive. Same thing.
You're building engine revs and once the gears engage you'll spin em.
@@Mixtapejah Only do that if you really hate the car 😂😂
@@sategllib2191 😂😂😂
thanks my man I appreciate that.
i blame yall for why im about to order o/r x pipe and m80 pypes.....
hey man what's springs do you have? and tire size?
Sounds nice
XXR 521s 18x8.5 and 18x10
Wheels? I love them
Hey i was wondering where u got the 01 bumper and hood ?
ONE SICK ASS MUSTANG.
just installed these pypes. Thought it would be louder, do they get louder as you break them in?
Fuq that sounds good
Can you give me an estimate price you paid for the exhaust setup
Hey man, is this x pipe louder with the flowmaster 40's or pypes? I just got my upr x pipe on and its super raspy from like 2-3k rpm... Let me know. Thanks
Hey Will, Pypes M80S are as loud as Flowmaster Outlaws and Flowmaster Super 10s no matter the mid pipe. However chambered mufflers like the Flowmaster 40s, Super 40s, Super 44s, and Super 10s sound the best with H-pipes with no rasp while the straight through mufflers like Flowmaster Outlaws, Flow FX, Borla S-Types, SLP Loudmouth1s and 2s, and Pypes M80s sound best with X-pypes.
I swear this is my next setup..
came with the car, I changed the midpipe and mufflers.
What did you do for the cel?
Bassani x pipe. and i only have 2 front cats no rear cats.
cool story, bro.
Yup, looks like 521s.
Where did you get ur catback from?
what did you use to fill the wholes on your trunk
Tommy Bales they have little plugs at home depot. I forget the size but I just painted them, put a little silicon around the bottom and pressed them in. no leaks.
around $350 for everything including installation
What exhaust set up do you have
UPR off road X-pipe and Pypes M80 mufflers my man
so you have no cats at all?
Is the x pipe catted? Thanks
Hey, what kind of rims are those? Thanks
Where did you get the x pipe ?
Is your stand standard?
Luke Raymond yes it is.
dose the upr bolt rigth up to stock headers ?
Yes
How you like this setup ?
What rims are those?
what midpipe do you have?
what motor is in your mustang? the 4.6 dohc or like a 5.4 or something?
JJ Rudawski this is the 4.6 sohc.
Yo is dis in sactown?
its craving civics
No cats.
what springs are those... and are those 18 inch rims
Anthony Encarnacion sportline springs. 18" wheels
+JaeHow23 how much did the springs drop you?...and nice car i love it bos
Anthony Encarnacion I bought it with them on there so I'm not 100% sure. but I think they're advertised at 1" drop in the rear and 1.5" up front.
+JaeHow23 preciate you ... and again dope car
Anthony Encarnacion thanks my man. I'm about to sell it though lol. I picked up a terminator finally.
which offset?
Love my 14 but this car is sexy
you sure?
ugh i fell alseep lmao
nope, none.
Sounds like an 18-wheeler on decel. Overall sounds like ass.