Aluminum TT-02 for $120 Is it worth your money?
Vložit
- čas přidán 26. 07. 2024
- In this video, I'll show you what you get with this $120 Tamiya TT-02 clone kit. I'll tell you what's good and what's bad about it. I will also tell you what you need to get it running as a RC touring car. There are other TT-02 aluminum hop-up kits out there but this one come as a roller. All you need to do is to install the electronics. #esc #tamiya #tamiyarc #tamiyarccar #tamiyatt02 #tt02 #rccar #rcelectronics
0:00 Intro
0:28 What aluminum parts are included
1:12 What else is included
1:44 What is needed to complete the RC car
1:59 What needs to be done before driving
3:16 My final thoughts
This is not a sponsored video. I bought this clone and the TT-02 with my own money. If you'd like to help out my channel, use the affiliate links below to make your purchases.
Plastic/Alloy Carbon Car Frame Kit For Rc Model 1/10 4WD TT02 Shaft Drive Parts
www.ebay.com/itm/314377549717
amzn.to/3LvFrJN
Universal RC Upgrade Kit for TT02 Car Trucks
amzn.to/40zuF9K
Parts for Tamiya TT02 Full Set Metal Upgrade Kit Compatible with 1/10 RC Car Tamiya TT-02(Blue)
amzn.to/41GlF3Q
Team Associated Reedy Radon 2 3-Slot 4100Kv Brushed Motor 15T ASC27425
amzn.to/3H3Msiq
alnk.to/cHKovtv
Flysky GT3B-2.4G FS-GT3B Digital 3CH 2.4Ghz TX & RX LCD Transmitter & Receiver
amzn.to/3oIqsTX
Waterproof 12kg Servo 180 Dgree Metal Gear High Speed Digital Servo Motor for Helicopter Tail Robot Car Drone Boat
amzn.to/41FhTrC
T Plus 480A Waterproof Brushed ESC
amzn.to/3oM9nbw
Yeah Racing DBB-1055BU QUTUS Slider 55mm Damper Shock Set (4)
amzn.to/40GUULw
Yeah Racing Spring Set For QUTUS 50 55mm Damper (DBB-007)
www.ebay.com/itm/266000231916
Tamiya TT-02 1/10 4WD Electric Touring Car Kit TAM58659-60A
alnk.to/fwotw0W
-----------------------------------------------------------------------------
Speed Testing TT-02 Motors Brushed Sport Tuned Reedy Radon Globact Hackmoto
• Speed Testing TT-02 Mo...
WHICH BRUSHED ESC IS THE FASTEST? PART 1
• WHICH BRUSHED ESC IS T...
SPEED TESTING 16 RC CAR ESCS
• Speed Testing 16 RC Ca...
UNBOXING RADIOLINK COOL 9030
• UNBOXING ISDT ESC70 Fe...
UNBOXING ISDT ESC90
• UNBOXING ISDT ESC70 Fe...
UNBOXING ISDT ESC70
• UNBOXING ISDT ESC70 Fe...
GLOBACT 80A ESC 550 12T MOTOR
• GLOBACT 80A ESC 550 12...
-----------------------------------------------------------------------------
Find me on Instagram: / rcsrccars
Check out my Facebook Page: / rcs-rc-cars-. .
Follow me on Twitter: / rcsrccars
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting RC's RC Cars so I can continue to provide you RC Car content! - Auta a dopravní prostředky
I forgot to mention in the video that the wheel hexes are aluminum as well. Also if you didn't notice, you will need to glue the tires before driving off. Thanks for watching!
Changing out the springs lowered the chassis by 4mm. It is now only 9mm off the ground. Such a big difference!
@@RCsRCCarswhich springs should we put
Where's the next video? Ive been looking at getting one of these to replace my current TT02 rally chassis.
It's a simple answer if anyone wants to race/go-fast aluminium kit is a must anything under 20mph keep stock
So this same exact kit I bought came today by UPS. Everything was the exact same except the tires were slick or drift like smooth tires without any tread on them. Same wheels. I also had purchased hop up parts from Tamiya and yeah racing beforehand, so I could upgrade it right away. First obstacle I ran into was when I removed the rear shocks, and removed the rear differential cover. The differential cover I purchased wouldn’t allow the shock towers to mount back properly. Didn’t fit. Then I oiled up the differential housing and didn’t bother to open the differential yet to grease it. I will later. Then I had the Tamiya 68T spur kit and unless you replace the entire driveshaft. You can’t use it. The coupler has a similar disc mounted to the spur gear and I was able to mount the Tamiya 68t directly to that instead of using the provided blue aluminum attachment. It’s literally a driveshaft with a coupler end with a pinned on disc that mounts to the spur. I couldn’t get the
Pin out to install it correctly. Any tips to remove pins? The next issue I ran into was. The rear shocks as they were removed. I mounted them onto my stand and began filling them with shock oil 60 weight and I made sure no air bubbles were in the fluid. Then when I called them and sat them aside. I made sure the cap was super tight, but one of them began to leak from the top when I compressed the coil over.
Thanks!!!
Aluminum parts doesn't always mean better in the handling, acceleration and braking department.
And once you hit something hard with aluminum it bends where plastic will flex.
Thanks for watching and commenting. 👍
What a great deal!
I have it myself. It is a lot better than Tamiya. But I have added many other aluminium parts as well.
I ordered this same set. I bought a 12kg low pro Feetech servo. A radio link remote and receiver. A s3650 3500KV brushless motor & esc. Two 2s Zee tech 5200mah batteries. A battery charger. And some lubricant oil. I need to get shock oil. But even looking at the actual tamiya arc kit. It’s all plastic. That’s why I opted for this kit. Did you ever drive it? I also bought a hardened steel pinion set 19t to 27t. What pinion should I run on it? I’m trying to do some
Parking lot speed runs and just mess around.
Hello sir, how well does it perform as is though compared to a stock TT02? Where I'm from they sell Tamiya products at a massive added price sometimes 2 times the price but we do have these at online shops at a much more reasonable price (at around 106usd compared to the cheapest TT02 model we have is 350usd) I'm really looking forward if you could do a running video of this particular chassis (P.S we have a racing club that accepts these kind of chassis but no one else at the club are running it yet)
Cool. Are those oil filled shocks? Are there ball bearings inside? Im guessing it came assembled and you just add the electronics right? Did all the parts fit?
I noticed the arm connecting the servo horn to the steering buckle is not at a perfect 90 degree angle. Is that ok? I’m building my first tt02 and thought it was an issue but after seeing yours I think it’s ok if it’s not a 90 degree angle.
i have the same full alluminum parts sortment and i can say the lower arm are bending super fast.. at the lower damper position i hooked in a brick and the whole lower arm was bendet.. that it was no more possible to reakt für the suspension.. i think aluminum is good in steady parts but at the hangup on the axles... well u will switch it back to plastic
Thanks for your first hand feedback. 👍
Yeah, stick with the original plastic lower arms. Alloy doesn't always mean better.
The problem with cheap aluminium parts is that they are usually not even hardened. Also even on the WAY more expensive racing grade RC kits, there are only certain parts ever made out of aluminium, while some literally NEVER are. Forces of an impact have go somewhere. Plastics and carbon either bounce back - or they break. Metal mostly bends. These full metal kits are nice shelf queens, or for drifting. Never attempt to race these, you'll end up unhappy.
I missed who made this car......and where to get one....😎👍
Hows the weight vs a normal TT-02?
do I need to buy a 27 tooth pinion for the 68 tooth tamiya high speed gear hop up if I'm getting this? - Do the parts even fit together? Thanks!
I don't have this chassis anymore to confirm but I don't think it came with a pinion gear. So yes you will need the Tamiya 27T pinion if you swap the high speed gear set. I can't be 100% sure but I believe the only parts that were not identical to the real TT-02 were the differentials.
Can this chassis be modified to a 251mm wheelbase?
I don't have this chassis anymore to confirm but I think the rear arms are reversible. So yes I believe so.
Is it worth it? I think so!