Auto Siphon - Mead Making Basics
Vložit
- čas přidán 19. 11. 2020
- Come join The Mead Hall Discord, home to over 1000 mead makers: / discord
Check out my other social media:
TikTok - / sammakingmead
Instagram - / sam.making.. .
Twitter - / sammakingmead
Facebook - / sammakingmead
Credits:
Sunny (Song) - bensound.com
Thank you! Super clear instructions without any sediment/waffle ;)
concise!
Knowledge 😁 🤘🍺
So…. I ended up breaking my auto siphon because I couldn’t get the tubing off. Even after The piece broke, I still couldn’t get the tube off so I just threw it all away. Any suggestions on how to remove the tubing safely??
If the last thing you syphoned had solids, remove the bottom part for inspection and clean out if needed before sanitizing.
I see the receiving container has had some bubbles in there? I take it is from the sanitizer and if so how much would be acceptable? Or is it just more of a "get most of it out" type thing?
As long as it's not a puddle, it's all good. This is only the case if you follow the no-rinse dilution rate, though!
My syphon ends up with a small bit of liquid inside it that shoots out the top, how does that happen?
Bad seal, I recommend picking up a new one 🐝
Tripod💅