Next you do that dip the new seals in power steering oilit makes it easier the 2 hole on the retainer is for special tool I made one from a piece of1/4 in x 3in flat stock about 8ins long it served me for yrs repairing those steering cylinders
I didn’t. It may fill with dirt but it was dirty when I took it apart so I’m ok with it. The cap had orings to seal the vessel soon risk of contamination to the hydraulics
www.ebay.com/itm/253911156160?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5lnAvBlYQiq&sssrc=4429486&ssuid=hhdyb9biqje&var=&widget_ver=artemis&media=COPY Here is what I bought
Next you do that dip the new seals in power steering oilit makes it easier the 2 hole on the retainer is for special tool I made one from a piece of1/4 in x 3in flat stock about 8ins long it served me for yrs repairing those steering cylinders
Oh nice. Thank you for the tips!!!
Thank you, thank you, thank you, thank you. I cannot thank you enough for walking us through the removal, cleaning, repair and reinstallation process.
Vary good
I thimk its either 5/8 or 1/2 in course thread nut
Its MESS FERGUSON.😁
Maybe you found those hoses? Mine are leaking badly and i cant seem to find them anywhere..
No I never found them. Probably go to o Reilly’s or somewhere and have them made would be best bet
What do you use to seal a hole after inserting wire
I didn’t. It may fill with dirt but it was dirty when I took it apart so I’m ok with it. The cap had orings to seal the vessel soon risk of contamination to the hydraulics
What part number kit did you get I just tried I have the wrong prts
www.ebay.com/itm/253911156160?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5lnAvBlYQiq&sssrc=4429486&ssuid=hhdyb9biqje&var=&widget_ver=artemis&media=COPY
Here is what I bought
Power wash it before you work on it 🤦♂️