DIY - PARTS WASHER!
Vložit
- čas přidán 29. 04. 2021
- During each restoration we have a problem with greasy parts - it needs to be cleaned. That's why I made a bathtub for washing parts.
-All the materials used are in your environment, very easy to make.
-Enjoy!!!
► Click HERE to subscribe to peChoO czcams.com/channels/2gV.html...
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣
╠╗║╚╝║║╠╗║╚╣║║║║║═╣
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
Instagram: / handmade_pe...
*Support the Channel**
Paypal: www.paypal.me/peChoO
Buy Me a Coffe:www.buymeacoffee.com/peChoO - Věda a technologie
nice, but a magnet to catch swarf would be good
I love your videos, you're so clever! A PC power supply, drum and fuel pump and bam, parts cleaner. I need more!
Very good addition the brush at the end !!!
These kinds of videos drive me nuts. I have the tools and experience to do projects like this but my imagination sucks. I never would've thought of this. Great job man! I got online looking for reviews on different brands of part washer cabinets before buying one. Now I want to build one. I even have an extra power supply from upgrading my PC build. I think you just saved me $200. THANK YOU! Jerry was a nice touch. That cracked me up. Lol.
Excellent. This goes to the top of my To-Do list. Thanks.
i have to admit, that jerry part at the start was the funniest thing i' ve seen in a while, totally wasnt expecting it xD
Brilliant piece of kit for the garage.....nice one.
Za ovakve ideje sam bez komentara. Odličan kao i dosad.👌👍👍👍
Taman da ima gde da se tušira Jery.🤣🤣🤣
Very creative use of scrap tank. I was thinking of creating the same from used and discarded outdoor barbeque grills. Often these are of the correct height and size to convert to a parts washer, with a cabinet made from stainless steel. Your use of a fuel pump and PC power supply have given me more creative ideas, too. Thanks for sharing this video.
That's awesome - I am always looking for stuff I didn't know I needed, and this is one!!
Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España)
Excelente 👏👏👏👏👏👏👏👏👏👏👏👏👏
I recently completed this project using a set of hand trucks as a stand to make mine more portable, low psi 12 volt fuel pump, an a computer power supply cord to power it. Works great but on mine a brush instead of the nozzle is a MUST or the splatter will cover you. Thank you for the inspiration and great money saving idea!
기술이 있으니까 아이디어만 있으면 못만드는게 없구나, 대단해 👍
Ingenious.. hats off to you sir
The most inovative creator ever.... If only we have a million guys like you... Most of tools manufacturer will close their factory!
Very nice 👍🏼 I’d like it in my garage any day
Ты монстр самоделок. Класс.👍👌👏
Belle réalisation bravo à bientôt salut Jeannot 🛠😉
Отличная работа! Вещь очень нужная. Я такую же себе сделал, правда из пластикового корыта и насос от станка для СОЖ. Пару советов.
Сток из резервуара лучше сделать повыше, что бы был хороший отстой грязи.
Выключатель лучше поставить вперёд и побольше, что бы можно ногой его выключать, а не грязными руками.
Шаришь 👍
I had to give this a big 👍 Well done!
Stay safe, Joe Z
Very good ideas for the quality of professional, the perfection. Tank you very much for the quality video.
Your work loks more and more Professional!!!
Keep it up 🙂
The video I’ve been waiting for 👌🏽👌🏽👌🏽
That is a really nice parts washer. Clever to use an old pc power supply. Can find those everywhere at almost no cost!! Im subscribing!!
Outstanding build
Prijatno si me iznenadio na kraju... mislio sam da je nešto beskorisno... i sad moram sebi da napravim jedan.... eeee... muko... :D
BRAVO!!!
tu galères des fois ? ça parait tellement simple que ça énerve !! good work i love !!!
Man thats a quality parts washing machine 🙌🏻
Te admiro y agradezco tus docencias y humildad y creatividad. Eres brillante e inspirador. Dios te diga Bendiciendo. Muchísimas gracias por tanto campeón.
Bardzo dobra robota👌👍👏 super
That’s super awesome 👏
Great video. excellent job. Thanks for sharing. Cheers
Nice work. We featured this video in our homemade tools forum this week :)
Absolutely amazing! You won yourself a new subscriber! 👍👍👍👍👍🌟🌟🌟🌟🌟
Bravo maestro uvijek genijalno.Poz.
Fajne pomysły i realizacja pozdrawiam
Briljant idea, thanks, wanna build one myself, and yours is very nice
Very very good project...
Good job !!!
Awesome idea bro
Félicitation , bonne vidéo
Eres un maquina picha, un saludo desde sevilla 💪👍🏼
So cool great video 👍
Super odcinek😀
Love it!!
Prices for mild steel have considerably raised lately. Currently it would be expensive to build all that. At the same time it looks like it all worth the trouble. I might be wrong, but try adding a 25l canister with fluid beneath the structure. Install 2 ball valves in a canister wall. 1 in a very bottom to remove heavy oil fractions and one in a top to remove light oil fractions. Suction is to install somewhere in a middle. That is of course if a pump can perform suction, as some of those can't. That will provide you cleaner fluid to wash with as fluid fractions tend to separate in layers. It is not necessary, but will grant you additional video and improve your part washer.
Not if you go to a scrap yard or had some scrap pieces laying around .
Pomysł i wykonanie super. Jakiej farby młotkowej używasz? Czy płyn w myjce z czasem nie rozpuści farby?
Это просто гениально!
Excelente idea, solo dos dudas
1) la bomba de donde la reutilizaste ?
2) que líquido ocupas para la limpieza ??
Saludos
Хорошая идея.
Hahhahah odlicna fora za miša. Svaka čast za montažu. Pozdrav
Svaka cast brat mozda i najkorisnija alatka za odmascivanje delova samo magnet dole ispod da skuplja opiljke da ne napuni filter i cepaj, pozdrav iz Leskovac drugare
Sensacional, parabéns!
Looks great...the only change I would have made is to plumb a filter into the pressure part of the system to filter out dirt and prolong the fluid and pump life.
скоро зима !!!! будем ждать снегоуборочную машину в вашем исполнении:)
With skills like yours you should market them excellent build ps I would buy one
i love your vids bro.
Petarda normalnie 🔥
bravo majstore
New subscriber!!🔥🔥🔥
I'm addicted...👍👍
Hi man, i am from Brazil. And your job is very good. Like like like
Good job Guys ;o) Mais une petite liste des matériels et des liens d'achats serait vraiment un plus :oP
Woooow 😎❤️ Amazing work 😏
😊😊👍👍 good job pechoo
Great job! Can I ask what type of paint you used; I like that hammered look finish.
Good luck brother 👍
Xaxaxaxaxaxaa,jerry was awesome :):):):):)
thank you super video
Gitara pomysł :)
Witam a ten wąz do wody zielony gdie mozna kupic ,pozdrawia. Dobra robota👍
SUPER !
Hello my friend very nice very very good 👍👍🙏🙏🙏🙏🙏
Super !
0:20 sec in, I liked and subbed cuz of that XD!
😁👨🏭
Very nice, sir
Awesome
super ideja odličan alat, jesi li razmišljao o izradi ultrazvučne kadice, samo napred srećnooo
I noticed that you used a Parkside Performance 20v 150nm drill, so how did it hold up for 2 years since you bought it, is it robust and do you recommend it!?
Excelente
Podasz namiary na pompę użytą w tym projekcie ? Myjka wygląda super:)
Wspaniała robota ( zreszta jak zawsze)
Mógłbyś kolego podać co to za model pompy użyty?
Pozdrawiam
Nice project. Making a decent sized parts washer has been on my (Rather long) "To Do" list for ages. Never thought about basing it on a gas cylinder though. I'm now thinking that an old 47kg propane cylinder could be the ideal size (1290x375mm) for what I want. I mostly degrease old machine parts, but when you get up to the size of tank that can take things like 1 metre long lead screws, they're bloody expensive to buy, and pretty expensive to fill with cleaning solution.
I'm not sure how long the fuel pump will work for though. They apparently rely on the fuel going through them to lubricate certain parts. I'm pretty sure that running a degreaser through the thing's going to kill it........ But the question is "How long will it last"? If it burns one up in 30 to 40 hours of use it can almost be seen as a consumable part, but if it's only 2 to 3 hours of use between failure's, replacing it is going to get old and expensive very fast.
I liked your comment! However, don't even consider cutting a gas cylinder with an angle grinder without taking the necessary precautions!... The sparks WILL cause the tank to explode!!!... In your face, and you will most probably be killed!
@@frederikmare9002 Don't worry mate, I've been alive long enough to know the danger that even "Empty" gas cylinders pose.
I've actually got a large propane cylinder in the garage right now that I grabbed to eventually turn into a log burner. It's had the valve out of it for about 6 or 7 months, it's been filled up with water and emptied once, and sometimes, when I finish with my compressor for the day, and need to dump the pressurised air, if I can't be bothered to grope around under the tank for the drain valve, I'll just wedge my small "Palm" blow off gun in the threaded valve hole on this cylinder, because it fit's there with the trigger held in perfectly, and it blows dried air around in the propane cylinder. I do this partly to stop any condensation building up in it and creating more rust that I'll need to grind out.
Out of the 5 or 6 times I've "Repurposed" pressure vessels into barbecues/garden waste burners, I don't think ANY of them have been purged as thoroughly as this one has. :D
Number one my friend
Super 👍
Hey I have the same black Parkside bl tools, they are great.
Thank youu..
what did you use for the hinges?
I DONT DO MICE! EEEKK pretty good parody of it tho"😂✊
Dobar uvod sa Jerry bravo.. i dobar proekt.. 👍
abonné 👍😉 super vidéo !
LOL poor Jerry
Mute, turned 2x speed and listen Bomfunk MC - Freestyler. That was awesome
Jakiej firmy używasz wiertel i gwintowniki?
Хорошо когда ролик называют как есть
Sprytne. Tylko mufki mogłeś zastosować takie przeznaczone do spawania.
Супер так держать
Excelente trabajo!! Cómo Se llama el manguito verde?
Kao i uvek, vrlo korisno i kvalitetno. Vidim da sve alatke farbas sa ovom bojom, pa me zanima ko je proizvodjac i jel otporna na nitro? Trazio sam pod bojom za alat, ali nista konkretno nisam nasao
Cool Efekt lak 3 u 1
@@peChoOO Hvala 👍