Ortur Rotary Roller YRR2.0 for Cylinder Engraving, Laser Engraver Y axis & Ortur Laser Master 2 Pro
Vložit
- čas přidán 12. 09. 2024
- Ortur Rotary Roller YRR2.0 for Cylinder Engraving, Laser Engraver Y axis & Ortur Laser Master 2 Pro
ORTUR launches Laser Master 2 Pro , Bringing Engraving to the Next Level
Ortur Laser Master 2 Pro is specialized for manufacturers.
Product Links:
ORTUR Online Store：s.zbanx.com/r/...
Laser module LU2-4 FAC (electric power: 20W, optical power: 4.5-5.5W)
60W Air Compressor for Laser Engraving Cutting Machine bit.ly/3CftXmg
Laser Master 2 Pro can support more functions. This is because the motherboard has been upgraded from the OLM-Max version to the OLM-Pro version. For example, the OLM-PRO motherboard supports new features such as flame detection and emergency stop.
The Laser Master 2 Pro is more reliable, because the 24V circuit system is used, the wires could support higher current, and this can support higher power laser modules and more add-ons.
The latest Ortur Laser 1.5 firmware is more powerful, because the Ortur engineer team optimized the motion algorithm based on the Ortur Laser 1.4 series firmware, increasing the maximum speed from 4000mm/min to 10000mm/min
The focal point of the LU2-4 laser module is smaller because it is the second-generation FAC laser module, the focal point is only 0.08 * 0.15mm, and the focal area is about one-quarter of the first-generation 0.23 * 0.23mm. So he can cut through 3mm plywood and 6mm pine board at one pass.
Laser Master 2 Pro has a longer service life. Because the mechanical structure has been specifically optimized, it can work stably for a long time at a faster speed.
You need just 10 - 15 minutes to install the machine.
It's not a original air assist, I did it quickly from an old co2 laser head like this s.click.aliexp...
#Ortur #Laser #Engraver
Could you please tell me what kind of coat you use for the glass?
black tempera paint work great, easy to clean after
hello,
nice work. can the rotary roller be used with lasergrbl? new to lasering and have been learning lasergrbl. not ready to move onto learning lightburn yet. want to learn one at a time. thank you
👍 Danke fürs Hochladen!
👍 Thanks for uploading!
👍 Very good and beautiful, thank you!
👍 Sehr gut und schön, danke!
Thank you :)
que le pones al cristal para que se vea negro
Yo lo he hecho pintando con pintura normal de cualquier ferretería en spray o líquida.
can i engrave YETI glases whit this lasser? I can engrave metal? what kind of paint did you put on the glasses?
I'm sorry, but I'm not engraving on metal yet, so I can't answer you. On the glass I used the cheap usual black spray paint .
@@kukomio pekné video, tá farba to je nejaká špeciálna, ktorá sa dá umyť vodou?
Great video, what I was looking for! Can you share where you found the air assist for this laser. I am 3d printing one but your seems just excellent!!
In this video there was an engraver and cutting without air support.
It's not a professional air assist, I did it quickly from an old co2 laser head
Go onto Etsy and people have made accessories via 3D printing. Very cheap too!
@@elissitdesign why would he buy one when he can 3d print his own?
Very nice
you should tell people you need lego blocks to raise the lazer- very confusing without that detail
Brother,what is the maximum size of the work area, ?
I dont have an ortur lazer, i have a sculpfun. will this ortur (already purchased) work with my sculpfun s9 and how do i connect?
the motor on the roller just BUZZ but dont roll in a direction
hello, if the glass has a handle ear this will work too ?
co to jest za farba czarna ? coś specjalnego do grawerki?
Not sure it was what instructions said but mine only worked when connected to Y2 motor instead of Y1 🤔
Works this Roller with the Sculpfan S9 ?
what paint did you use on glass?
Not sure if answered but I’ve gotten great results with black tempura Paint, black spray paint (cleaned with acetone), and those black window markers for cars with the wide sponge tip!
What's your speed and power?
when engraving the image on the cup, the speed was 2500mm / min and power was 100%, on beech wood as well.
Why are you wearing gloves ????
We tried and can't get ours to run at all!!!
people can't talk any more -- We had talking movies since 1927 !!!
Ahoj mam toez gravirovacku Ortur len moja nema stop tlacidlo.Mam tiez ten rotacny valec, ale nejak mi to blbne. Akonahle dam daco gravirovat , tak sa mi Os kde je laser asi v plnej rychlosti posunie doprava.Ak nedam stop tak chces ist mimo vsetkeho.Nevies preco to robi? DIK
Ak používaš lightburn, vypni "Home pozíciu" , nastav, aby štartovalo z pozície užívateľa a nie z absolútnych súradníc, ďalej na y osi nastav rotáciu, pre istotu pozri či nemáš nejaký objekt v lightburne mimo gravirovaciu plochu.
@@kukomio no nieco mam z toho nastavene ale robi mi toto czcams.com/video/_LfDhSOS9Cg/video.html