Video není dostupné.
Omlouváme se.
Why You Should NEVER Sew "Scant" Quarter Inch Seams
Vložit
- čas přidán 17. 08. 2024
- ►► 5 Essential Tips for How to Create the Perfect Quilt Block Every Time - Free Workshop →
www.joyfulandm...
Let's talk about the infamous and often-debated "scant quarter-inch seam." As a passionate quilter, I've always been bothered by the confusion this term brings to the quilting community. But don't worry, I have a GREAT solution for you that eliminates the guesswork, ensuring precision in every stitch. I provide a step-by-step guide to using painter's tape to achieve an accurate quarter-inch seam, and emphasize the importance of focusing on the finished measurement rather than getting caught up in the scant seam debate. Let's sew with confidence and accuracy - say goodbye to the scant quarter-inch seam dilemma! If you enjoy this video, don't forget to like, subscribe, and join me for more quilting tips and tutorials.
CHAPTERS
00:00 What is a Scant 1/4 Inch Seam?
00:56 Why Scant Seams Aren't Reliable
02:53 The Solution to Scant Seams
06:10 Test Squares and an Accurate 1/4 Inch Seam
Hi, I'm Mary! If you've signed up for my free mini quilting course or ANY of my workshops at joyfulandmerryquilting.com, you know the level of detail my videos go into to give step-by-step quilting help. Quilt along with me, learn the best quilting tips, and essentially join an in-depth quilting class with me as your instructor! I'm here to help you improve your skills as a quilter as best as I can. Comment with any questions you'd like answered, and thanks so much for watching our quilting videos this week.
Thanks for this discussion. I've been saying the same thing for the seven years I've been quilting. It's "received knowledge" and just not helpful. I want my units to end up the right size. Imprecise terms just aren't helpful and border on old wives' tales because they persist despite the facts.
Thank you so much Michele! I can't tell you how MUCH I agree with you! Just because "that's the way it's always been done" doesn't mean that there may not be a better or more efficient or more accurate way around the corner. Thank you again for your comment and for watching!
To me, using the new term of "scant quarter inch seam allowance" infers that there are two types of quarter inch seam. But the truth is there is only one accurate seam allowance and this video shows everyone how to get an "accurate quarter inch seam" on any machine every time. And I thank her for maling it!
I guess I’m a real quilt rebel. I started making my seams 3/8 inch about ten years ago, and It simplified the whole business for me😊
Painters tape stacking can be fussy so I use self adhesive Velcro…the soft side not the loop side. The height of the Velcro is perfect to create a lip…and the adhesive I have found lasts longer than painters tape even reapplying it many times after changing a bobbin. To make the Velcro easier to grab I turn the very edge under (width closest to me). When I’m paper piecing I just take it off and stick it out of the way on the top of my machine. All other procedures are as Mary described in this video!
So happy you are an "accurate 1/4" seam" quilter also!!! BRAVO and thanks so much for sharing your system!
Interesting...I may try that.
That's a great idea 💡 👍 😀
Thank you l am going to try the velcro :)
Excellent idea but I think the manufacturers of the machines need to be accurate with their seam guides and feet.
After lots of frustration for years, I finally took the ruler I use for cutting my fabric and measured like you did. Some people cut measuring in front of the line, some on, and some behind the line. I used where I cut in front of the line and went over two thread widths. I was thrilled. I sew most of blocks without pinning. I have had great results. I love the painters tape. It helps so much. I sewed with residents of a nursing home, some of whom had physical difficulties, but with the painters tape they were able to guide the fabric and got wonderful results. Thank you for spreading the word. This will help the frustration level of so many other quilters. I can say from experience that it works.
Great information! Thanks so much for sharing!
This was very helpful to me. The first time I made a quilt that called for a scant seam, I had no idea what that was. So instead of researching, I figured it meant not quite 1/4” and went for it. The queen size quilt was very intricate, and a gift I was very excited to give. Well, I washed it and so many of my scant seams were “too scant” and came apart! I was devastated. I ended up patching them together by hand. I was not proud to gift it, but I did. I wish I had seen this video before I made that quilt! Thank you!
Thank you so much! That's exactly what I mean when it comes to the term "scant". It's unmeasurable - and I refuse to use it. Thank you for your comment! It's truly appreciated, Kim!
I’ve used painter’s tape, but frequently had difficulty getting the edges of the tape even. Thanks so much for your tip of trimming the tape. Thot will be so much easier than fiddling with it.
Use an old Rotary Blade - I keep an old blade that can no longer be used for fabric - in a cutter that's specifically for paper and tape. Works well! Thanks for watching!
Another way to make the painters tape edge even is to use an exacto knife and cut a chunk of the tape several layers thick off of the roll instead of unrolling it
I have been sewing on and off since I was in high school and I've done a lot more sewing within the past 5 years. I never once was taught "of" the 2.5 squares adding up to 4.5 inches, to check for accuracy. I was just taught sewing stuff, from home economics. I have a quarter inch foot (don't use it) and the painters tape hack. What I'm mind blown about, the best here, is taking the 2.5 squares and "adding them up" to 4.5 inches to double check my quarter inch mark on my machine with painters tape. This is so genius, THANK YOU so much.
You're so welcome! I'm so glad it has helped you and I thank you for watching!
I started using this method when I started quilting over 30 years ago. I quickly determined that the quarter inch guide or foot were not accurate. Plus I needed a guide for my fabric to follow. I wanted to speed sew and I wanted the "rail" for my fabric to follow. The wool pressing mat made the difference for flatter seams and accuracy. I used a magnetic seam guide once but the vibration of the machine moved it. My machine had a plastic bobbin cover so it works best with all metal. The sticky tape works best for me.
Thank you for your input! Sounds like you agree that an accurate 1/4" seam is the way to go! Thanks for watching!
OMG ❤! I am soooo glad to find someone that agrees to “NO SCANT 1/4” seam” 😊. I’ve been quilting since 1979, and all the quilted I’ve seen (used and washed many times). The main 2 areas of wear on a quilt, in all the ones I’ve seen are: (1) the binding and the seam stitching coming out, and/or the fabric shredding at the seams.
Thank you! That's EXACTLY what I'm talking about here and I'm so glad that you agree! Thanks for watching!
Excellent tutorial. Learn something new every day!
And yes! And I *do not* utilize scant quarter inch seams. A quarter inch in from the end of the fabric is "slight as it is," why sew *weakness* into your masterpiece only to have it rip later. Doesn't make sense to me!
...interesting, this makes so much sense!!!!: This absolutely explains why I don't like "scant seams!"
Thanks so much for your comments and for watching!
You can also cut the fabric a "SCANT" 😉 larger and trim it to the correct end size. Which is actually, a better technique for ALL your pieces.
I do prefer to trim back when I'm sewing individual pieces together, but when you're sewing a more complex block with many seams and intersections, over-sizing - even if it's just a "scant" is not always an option. Thanks for watching!
I love this idea, especially stacking the tape so that the fabric has something to follow. Thanks for sharing your great tip!
That's not so easy if you use an Accuquilt cutter. My hands don't have the strength to cut that many pieces. I can fussy cut a few, but not bunches of blocks or shapes anymore. Plus, that's a lot more figuring to get the measurements correct. If it becomes a math project, it's not fun for me anymore.
Thank you Mary, I use my ruler and adjust the needle position to get as close to a 1/4 inch seam. Always test sew and measure the seam but have never checked the finished piece. I will definitely get me some painters tape😂 thank you for sharing your knowledge! I greatly appreciate it.🇦🇺
You'e so welcome!!! Thanks so much for watching and for commenting!
Definitely, I use your method and move the needle over one bump to the left and I get my perfect quarter inch seam! 😉
OMG! What a great video. I learned from this video that I was sewing my pieces on right side when I should be using the left. Thanks.
Thanks for watching! Glad it had information you can use!
Thanks to this, I may FINALLY be able to sew accurate 1/4 inch seams!
You're welcome! Thanks for watching!
Thank you Mary for this helpful video. In the Shabby Fabric videos a special thick stackable tape is always used. However, they do not demonstraight how to measure and place the tape as you did. You did an excellent job showing how to.
Since one of my quarter inch feet for straight stitch has an opening on the 1/4 inch blade itself I just wrapped 3 layers of blue tape on it and it gave me the exact measurement. This makes it possible to change the foot for other pieces that doesn't require 1/4 inch foot and when I need to remove the bobbin. Thank you again. I'll be sure to share this videos with the quilting girls. 😊
Thank you so much! And that's a great suggestion for your 1/4 foot! Thank you for sharing!
Just watched your video and want to say thank you. I don't do a lot of quilting so have never heard the term "scant 1/4in seam. We do a group quilt every year and raffle it off for charity. The lady that organises it all quite often comments that some of our pieces are not being sewn at the correct measurements. Your video has now explained why and how to solve it. 😊
So glad it was helpful! Good luck with your projects! Just a little tweak with the seams and you'll be amazed at how the blocks will come together! Thanks for watching!
Great information and I could really see what you were doing! Awesome camera angles!
Thanks so much for watching and for commenting!
Thank you for this video! I have been struggling with the elusive scant 1/4" for years and now I think I may have been given a lifeline! Thanks!🙂
I'm so glad! Thanks so much for watching!
Wonderful video! You taught this old dog a new trick!🥰
I'm so glad!!! Thanks so much for watching!
Thank you. I just finished month (block) two of a Block of the Month quilt (my first quilt) and each time I tried measuring and marking my seams for the elusive 1/4 inch seam. Some were right on, some wonky and I had marked my machine with a single layer of painter's tape. The finished size of block one was close to correct, but block two was off by over 1/2 an inch. I am SO GRATEFUL for your video. I will do exactly as you showed and make test squares. I had never considered that the thread size and fabric foldover would make a difference. Genius. Helpful. I will subscribe to your channel and look for more tips as I learn this craft!
Thank you so much for your kind words and for watching! Good luck and feel free to ask any questions you may have - I'm happy to help!
Thank you so much for bring this out in the open. I have always had so much trouble with my squares not coming out to the full with. It has driven me bonkers trying to figure out what I was doing wrong. Thank you thank you thank you!
You are so welcome!! I can't tell you how much I appreciate your comment and how glad I am that this helped you. Thanks so much for watching and commenting!
I have the same Janome machine as you, and I love it, but the 1/4" foot caused me a lot of pain at first. My pieces were inaccurate because the seams were too large. "Scant" was difficul to judge. Eventually I purchased the purple vinyl Qtool Sewing Edge, which works just like your masking tape. It's moveable and reusable, and works better than my 1/4" foot. I wish janome would make a "scant-1/4" foot. I make a 10" postage stamp block from 1.5" scraps of each quilt I make. My earliest ones are 1/4" to 1/2" too small because of the problem you discuss. Thank you for helping new quilters resolve this problem.
That is GREAT information! Thank you - I will check it out. I see that it's made by Marci Baker and I love her products. I have ordered it and will give it a try!
Thanks again and thanks for watching!
@@joyfulandmerryquilting If you haven't discovered it yet, here's the title of the video lake8836 is talking about; it gives clear instructions on how to use this great tool to accomplish an accurate scant or 1/4 inch seam: "Why and How to Sew With a Scant 1/4" Quilt Seam, Marci Baker of Alicia's Attic". And here's another YT video that you may appreciate: "What is a 1/4" and a Scant 1/4" Seam Allowance?" that made ME understand the "why" of a scant 1/4 inch seam.
Great tip. I already had my 1/4 marked with painters tape, but never thought about stacking it up to give a little edge. I have tried many different seam guides, magnetic, stick on etc. they always seem to get in the way of my right hand. I usually get frustrated with them and sew with just a single layer of tape. I'm definitely going to try your idea. Thanks Mary.
Glad it was helpful! Thanks so much for watching!
This is the best video for new quilters when sewing their seams. You did a great job! I am able to get an accurate seam with my edge 1/4" foot and needle position, but many do not have the ability to move their needle. However, I loved your video. It can be used for any size seam.
Thank you so much for your comment! Yes - I absolutely agree - the needle positioning option on a machine is the best option. But this is helpful for those without that option. Thank you for watching!
@@joyfulandmerryquilting I not only watched, but subscribed. Thanks again!
Thank you Mary. I am a new quilter and when I heard the term “scant quarter inch I was very confused. This makes a lot of sense. ❤
It's one of those words that just has such a negative connotation. I prefer accurate! :-) You're welcome and thanks for watching!
Me too ughhh a scant !!!!
I think this proves the point that to get “just the right size”, or an accurate measurement of the sewn fabric pieces, the “scant” quarter inch seam needs to be …properly “scant”! (“Scant”, btw, means just barely “less than”)
As I have said in many of the previous comments - we'll just have to agree to disagree. When quilting, we use precise measurements. The term "scant" has been proven to be very imprecise with quilters of all levels of experience, struggling to figure out what "just barely" or "less than" means. Although your definition appears to be very straightforward by many quilters, I have heard from way too many quilters who struggle with the term, finding "scant" to be very difficult to translate into a measureable term - which is why I created the video. Thanks for watching.
Thank you so much Mary B!! This is the best video I've found for accurate sewing. I will definitely use your suggestion.
Thank you for your kind words! I truly appreciate it! Good Luck and let me know how it goes or if I can be of help Ginny!
Mary, I agree with your frustration and your approach. I would modify it in small ways and add a bit. I would test with 3 fabric pieces to make sure a slight difference didn't compound. I would NOT put the seam guide across a top bobbin cover without also using an Exacto or box cutter, after positioning, to allow a bobbin change without starting over. Also, I would emphasize an accurate pressing technique and awareness of thread sizes. I saw a comment referencing Karen Brown at Just Get It Done Quilts and she has also helped me tremendously with these and other accuracy issues. Finally, I still use a 1/4" foot but mostly rely on it only when sewing on each side of a drawn center diagonal, a la HSTs, since this trick works not-at-all for that technique.
Thanks for the input - I already made a Part 2 video that included some of your suggestions that I took from comments made by other viewers. Here's the link if you'd like to take a look: czcams.com/video/xYL3LhiXB2k/video.html
I have made about 2 or3 hundred quilts in the 64 years of quilting. I believe there are to much concern about 1/4” seams. Just keep your seams the same throughout. More concern should be on cutting the parts on the proper grain. When sewing across grain like diamonds the grain will stretch.
Thanks for sharing, Faye! It sounds like you have a lot of "hands on" quilting experience. Unfortunately, I have found that it's not always possible to simply sew with consistent seams that are not an accurate 1/4", and then get a perfect block in the end. If all of your pieces are the same size, that will work, but if you are adding larger and smaller pieces to the mix, the tiny amount that "one" is off as compared to another solid piece that is cut to size - they will just not fit together. But, again, with your years of experience, I'm sure you have perfected your piecing. Thanks again for your input!
Amen to that ❤
@@joyfulandmerryquilting So true. That's why test blocks help with no more tears quilting.
Thank you very much.
I’m not a quilter but I still appreciate learning how to be more efficient with sewing.
You are so welcome!
Thank you. Finally got the quarter inch seam sorted! I am in Australia and have been trying to get it for ages. Very easy to understand.
You're so welcome! Thanks for watching!
I've been a quilter over 30 years & this has been very helpful & not "clickbait" at all. It's a true quarter inch seam in that the patch comes out at 4.5 inches. I've used the things that have the holes to sink the needle into but the holes are too big & I can still slide the needle around in the hole. This is a very good video & I'm sure it can help new & experienced quilters. Disregard the quilt police.
Thank you so much Marcia! And I truly appreciate you coming to my rescue! :-) I couldn't agree with you more. As long as the finished size is accurate, the word "scant" means absolutely nothing. It's not a measurable term - it's an arbitrary word used that I believe is quite confusing to new and experienced quilters. I have answered the question in my quilting classes more times than I can count. I've tried to describe "scant", I've tried to demonstrate "scant", and finally I realized the problem was not in my attempts to explain the word, but rather the word itself. Again I appreciate your comment and your support! Thank you - you've made my day!!! And thank you for watching!
@@joyfulandmerryquilting you're very welcome! I'd never been able to get that term so I really do appreciate your expertise! I'm happy I made you happy!
Thanks for the explanation. Now I understand why my blocks are always off and don’t measure correctly. I didn’t realize I was losing the measurement to fold at the seam too. 💕
You're welcome! Thanks for watching!
I'll need to try this out on my machine today! Thanks for sharing!
You're so welcome! Thanks for watching!
Awesome-thank you Mary!
You're welcome! Thanks for watching!
After reading comments, and the fact that I am a novice with quilting, I appreciate you showing the importance of and how to get an accurate finished measurement. I love the idea of stacked painters tape because the sticky notes and regular single layer of tape has not worked well for me with my limited experience. Thanks for the help. I have heard the term scant and have never understood what it meant. I understood your explanation and what people meant by scant now that you have explained.
You're so welcome! Thanks for watching! There is a follow-up that you may be interested in: czcams.com/video/xYL3LhiXB2k/video.html
Omgoodness Mary I really like your teaching moment; and yes I’m newer to quilting although sewing and crafting my whole life!!! I love it!!! To date I’ve accomplished 3 quilts all as gifts for special people, and 2 have been enjoying their heavenly home🥰.
Thank You so much 🥰🙏🏻✝️❤️😀
You're so welcome and thank you so much for your kind words and for watching!
This is genius! Thank you so much - I have been struggling with keeping my seams scant and straight!
You're so welcome - there is a follow-up video based on suggestions given by viewers if you're interested: czcams.com/video/xYL3LhiXB2k/video.html Thanks for watching!
Thankyou thankyou thankyou. OMGosh, I just have had that problem and I used the line on the machine and have had the WORST PROBLEM. . Wish I had seen this post prior.
I'm so glad it's been helpful! Thank you so much for watching!
I learned something that will help. Thanks about the needle drop to measure the 1/4 in.👍
You're so welcome! Thanks for watching!
@@joyfulandmerryquilting I checked my seams as you recommended and I am waaay off. Can’t trust the 1/4 inch foot. Explains why my final 12 inch square doesn’t measure up. Grateful for your tip. 😘
Thanks for sharing this video. I find it very useful and I use this method as I learnt it from "just get it done quilts"
Karen Brown from "Just get it done quilts" has many tips and tricks and has taught me much. I think I am going to enjoy your videos too. Thank you again xxx
Thanks for watching!
Hi there. Thanks so much for this video. That really helps and makes a big difference in the overall measurement of the quilt block. 😊
You're so welcome! Thanks for watching!
►► 5 Essential Tips for How to Create the Perfect Quilt Block Every Time - Free Workshop →
www.joyfulandmerryquilting.com/opt-in
Thank you so much! I’m usually struggling with that!
You're welcome - it's a common issue and trying to figure out how to accurately sew a "scant" seam can be overwhelming! Thanks for watching.
This is very helpful! It takes the guesswork out of the seam allowance and produces an accurate seam each time. I’m definitely going to try this method! Looking forward to accurately sized blocks 😊
Thank you so much - it really does work! Be sure to watch the follow-up video with a great product that was suggested as a result of this video. Here's the link: czcams.com/video/xYL3LhiXB2k/video.html
You’re welcome Mary. I’ll be sure to check it out 😀
Great second video! I appreciate how thorough and patient you are in your teaching and feedback. I’ll share that I recently made blocks for a square in square pattern and there’s a lot of variation in my “scant” seams…let’s just say they turned out to be less than the 10 inches square they were supposed to be lol! In the end, I’ll make them work, but I’m definitely looking forward to trying your method as it will be “joyful” and a relief to have consistent seams and accurately sized blocks. Looking forward to checking out your other videos Mary as I really do appreciate your teaching style, thanks again! Susanna
Your description was terrific. I have always wondered how ‘big” is a scant. I will definitely use your ruler and tape method in the future. Thank you 🙏🏻
Thanks so much for watching! I'm so glad it helped and I appreciate your kind words!
I just cut deeper into the painters tape for several layers at once. The rolls designated to my area anyways so who cares. I also cut the section over the bobbin case separately after sectioning the layers off the roll. This way the bobbin can be removed without removing the tape and resetting it all up because it won't need to be removed from the bobbin case lid. Hope this makes sense. When it doesn't stick anymore because I've removed it for other projects and stuck it under the wheel of my machine for storage, I use a straight pin on one corner and just remove one layer. Waahlaa... brand new once again. I have also cut the 1 inch roll down the middle and used the straight edge for the fabric side. Extra 1/2 inch for another machine or ready when needed again.
Old school works for me and painters tape is cheap. I do still square up cuz no one's perfect even with these methods. Quilts flow together so easily, I'm onto the next project without alot of hassle.
Thanks for all your tips, fun to watch and see all the comments.
Babs near Tombstone, AZ
GREAT tips! Thanks so much for your comment Babs! And thanks for watching!
Fantastic. I have used painters tape for years but the fabric can float over it. Then I used a Sharpie. My daughter nearly had a heart attack seeing me put permanent marker on my machine bed. The problem with the marker is, the fabric again can float. The marker comes off easily with alcohol. I do that to my plastic storage containers too. When I empty them, I clean the writing off so they can be used again. Oh duh. This makes total sense to stack the tape. Out of all the things I have done in my life from stained glass, all my kids clothes to high school, wedding gowns, men's suits, car seat covers and head liners, carpenter work, hanging dry wall and other countless things, something as simple as stacking the tape never occurred to me. Sometimes the simplest ideas escape me. I will be using this idea. Thank you so much for sharing.
You're so welcome! Thanks for watching!
Thank you! ❤
You're so welcome! Thanks for watching!
Great tutorial!! This is so helpful. Thank you, Mary. ❤😊
You're so welcome! Thanks for watching!
But this still a scant 1/4"...just a different method of achieving it.
The point is that many quilters, especially new quilters, are intimidated by the word "scant". It's too subjective and they find themselves guessing where to take their next stitch (which is not always accurate). I choose to ignore the word "scant" as I said in the video, and just create an accurate seam with measuring the final piece rather than trying to figure out where to place my needle when I sew a seam. Tomato-tomahto! Thanks for watching!
It's still a scant...even if YOU don't like the term, lol. Don't confuse new Quilters even more... and don't click bait. That's just not nice.
Came here to say this
Gosh this is so helpful. I hate "scant" this is more to the point!! Great job Mary and thank you.
@@joyfulandmerryquilting This video is misleading because you’re still positioning the tape for a scant 1/4 inch seam. You try to make it sound like sewing a scant 1/4” seam isn’t necessary to achieve accuracy if they just follow “your method,” which isn’t yours at all. Using stacked painters tape (or Post-It notes or a magnetic seam guide, etc.) has been around since before I was born (I’m 73). My mother secured a small block of wood to the bed of her old Singer machine to use as a seam guide.
The scant 1/4” seam allows for the “turn-of-cloth,” which is the proper sewing term for that measurement difference that occurs when a layer of fabric is turned over a stitched seam for proper positioning. It originated in garment sewing for areas like lapels and collars, for example.
Thank you for this tutorial. I've used the tape before but got tired of it. I used the special foot with the blade on it. It works as long as I don't fall asleep while sewing. It's time to go run with scissors. Oh wait. That is for pet peeves.
Thanks for watching and for sharing! :-)
I was a Production Patternmaker in the garment industry for many years. My sewers would cut through the roll tape as thick as he needed, all at once with the painters tape. Most if the time, he would use about 1/8” thickness. Cut the tape with a sharp blade. He would use the tape as a wall, as Mary is speaking a about, but You do not have to take off each each layer of tape and line them up. ❤
Thanks for the tip! There's always a new way around the corner to approach this issue. I appreciate your comment and thanks for watching!
Great tip on how to achieve a scant quarter inch seam. I also see quilters make pressing mistakes that cause the fabric to stretch or shrink thus ruining their perfectly sewn piecing.
I agree - the longer we quilt and the more we share what we've learned, the better our finished blocks and quilts become. Thanks for your comment!
Great tip. Thank you x
You are so welcome!
I have a square note pad that I tape a few pages in place. My friend uses post-it note pages. These are other options that work well.
Sounds like you are also an "accurate 1/4" seam quilter" rather than a "scanter"! :-) BRAVO!
I understand what you're saying about these blocks and agree. However, I have found that the scant seam is the only way for me to be successful when making half-square triangles or stitch and flip corners.
It's best to do what works for you. Thanks for sharing!
I so agree about that scant term. I take a slightly different approach in that I refer to a "consistent" seam width based on sewing with the edge of the pieces being lined up with the edge of the 1/4" foot. Yes the blocks may end up being slightly smaller but if all the blocks are roughly the same size who will know when the blocks are joined, quilted and washed? I hate to see newbies being stressed about starching ( another bet noir of mine!) perfect points, perfect sized blocks etc etc, Quilting is about the enjoyment of selecting fabrics , pattern and creating an end product that you are proud to give to some one or use in your home, It is NOT about perfection. Even when I was teaching it was achieving an end product that looked good that was my aim. I've noticed when you show off your work non quilters are just amazed by what we have made and so many forget that. They are their own worse enemies in stressing over perfection in my opinion. Rant over !
Thanks for your input Maureen! We all have those things that are most important to us when quilting and there are no “right answers” when it comes to the enjoyment we receive when we make a quilt. The purpose of my channel is to offer my solutions to issues I have encountered as a new quilter as well as those I have dealt with as a quilting instructor. Of course, there are many ways to accomplish the same task and that’s the beauty of having a forum to share.e. Thank you for watching!
👏🙌🏼 yes, this is it! I’ve always thought “scant” to be the most imprecise word.
Thank you! I absolutely agree!
Thanks for the video and detailed story!
You're so welcome! Thank you for watching!
Love this! Best tip I have seen on this! Thank you! ❤❤❤
Thank you so much! Thanks for watching!
Oh yes!have tried everything else, this makes so much sense. thank you ☺
You're so welcome!
I’ve done this with a stack or Post-It notes. Worked great!
Yes! There are many ways to achieve an accurate result! Thanks for sharing!
well done Mary ☺
Thank you so much!
I use painters tape too. I stack multiple pieces to make a ledge/guide. If I’m using a machine that is digital, I sometimes just shift the needle over a notch or two to get the seam allowance I need. My most preferred method is to cut the fabrics slightly larger and then after piecing, trim down to the correct size, assuming the style of block lends itself to that method.
I absolutely agree! Thanks so much for watching and for sharing!
Thank you so much....I am trying and hope I do much better with my seams.
You're so very welcome! Thanks for watching!
Perfect. I will try it from now on. Thankyou very much.
You're so welcome! Thanks for watching!
I'd done this similar technique, but I'd used a measured a 1/4" (1" in length) line via a sharpie pen, on top of a small post-it (l=1" x w=.5") then masking tape on top. Several years later, still works great!
Thanks for sharing! Sounds like it works well for you!
FINALLY some using plain old logic. Very similar to what I have set up for myself. Isn’t it such a relief!?!
Thank you! I can't tell you how much I appreciate your comment. Thanks so much for watching!
This was timely for me- just started a "scant" pattern. Thx for the tips on setting up the machine. Subscribed 👍
Thank you so much and I'm so glad it helped! Accuracy is so important and in my opinion, the term "scant" has too much "guesswork" involved. I'd rather have my seams accurate right from the start and not have to try to figure out how to make those seams "scant".
Thank you ! Very helpful.
You're welcome! Thanks for watching!
Thanks for your video. I have a quibble about the quibble on scant v. accurate.
A scant seam is just that. It is scant to allow for the thread/fabric. It is not a full 1/4" from edge. An accurate 1/4" seam is a full 1/4" seam which is needed for most blocks that have star points in them. Sewing a scant will cause problems with your points. Accordingly, scant and accurate are two meaningful variations of a modality that gets you to "accurate" for the intended purpose.
Small quibble: you state "an accurate 1/4 seam in your vid" which of course flies in the face of your opening salvo!
I would also point out that a straight stitch plate helps for consistent results as well as a sharp needle, as distortion occurs. (and of course sewing straight consistently from beginning to end which all of us have problems with in the beginning).
In my world, a scant 1/4" is one needle click to the right. It works 100% of the time (except as noted above for star points). I don't mind calling it scant because that is how it measures. It is machine driven, and I never have to think about it. My Bernina gated foot is perfect (and expensive, but saves me time). The two together ensure that every time I sew (even during happy hour!), my seam is going to be exactly the same sans all of the accouterments: tapes, ledges, prayers, tears, curse words! If your machine is too smart and senses a straight stitch plate, you may not be able to use your SS plate and one click to the right. My Bernina B530 is not that smart. I have other machines, but I only piece with this one due to the consistency.
I agree and it sounds like you have the "scant" issue totally under control, so this is not something you need to wrestle with. As I've said, my issue is not with the seam itself - it's with the confusing and unmeasurable term "scant". I have taught quilting for many years and as much as for some a scant is one click, or one thread, for new quilters this does not compute as they begin to tackle quilting and the precision that' involved. In the end we all want an accurate finished piece, but when we throw unmeasureable terms such as "scant" into the way we achieve that accuracy, it can be confusing. That was the point of my video explanation. Thanks so much for watching and for taking the time to offer your opinion on this topic. I do appreciate it!
Thank you so much for this tip. It’s great
You're so welcome! Thanks so much for watching!
Great video!
Thank you so much! Thanks for watching!
Thank you for this tip! Perfect!
You're so welcome! Thanks for watching!
Great Video, Excellent idea. Thank you
Thank you so much! I'm so glad it was helpful!
Have been thinking about starting to quilt after teaching myself to sew about five years ago. I have been making bags and purses mostly. This video, although very well done, made me change my mind. Quilting is too exact. Life is too short.
I'm sorry you feel that way, and I would RARELY say this, but you're probably right. If this video has driven you away from quilting, and you haven't even sewn your first seam yet, this is probably not a hobby that would bring joy. Good Luck finding your "happy place"!
Hello Mary, I think in the current time and year, the fact that the quilt police exists is really worrying and it discourages many people from learning. I liked your video and I found it really interesting because there are always many people who need these pieces of advice. Not everyone follows everyone and mentioning otber channels is not appropriate. The people who enter to criticise other people’s work should think twice before commenting because it may hurt the creator’s feelings. I like watching these channels because I always learn something, and personally your advice has helped me. I encourage you to continue what you are doing, and those who enjoy being the quilt police that instead of criticising they should try create their own content before talking. The quilting world is too pretty to allow people who make it ugly. If you don’t have anything nice to say, say nothing at all. Thanks for your video and greetings from Spain.
Oh my goodness - thank you so very much Cris! I am so grateful for your kind words of support. Sadly, those who are so critical often miss the point of the message in the process of disparaging others and in the end, nothing constructive results from the exchange. Thank you again - you have truly made my day. I have visited Spain twice - and LOVED it. Welcome to our Joyful and Merry Community!
I am glad you loved Spain,and thanks to YOU ☺️☺️☺️☺️💕
Thank you for sharing your knowledge with us. What a fabulous, cheap method using masking tape 😊.❤
I love painter's tape - it is so versatile. Masking tape tends to leave a residue behind. You can remove with with "Goo Be Gone" or something similar, but Painter's tape seems to be a little cleaner when removing it. Thanks for watching Debbie!
@@joyfulandmerryquilting Thank you for correcting me. I will make sure to get the painters tape. 👍
You can use the quarter inch seam presser foot if you shift the needle position one place to the right.
If your machine has that capability, that's a good option.
EXCELLENT! Thank you.
You're so welcome!
Thank you!!!
You're so welcome! Thank you for watching!
i move my needle to the right so i can take advantage of both feed dogs. then i follow your method from there. my tape ends up going all the way up past the needle just to the right of the feed dogs.
Thanks for watching!
Oh thank you for sharing this!!
You are so welcome! Thanks for watching and for commenting!
Very helpful, thank you.
You're so welcome! Thanks for watching!
Brilliant
Thank you so much! Thanks for watching!
You’d think that by now manufacturers would put a scant 1/4 inch seam mark on the throat plate of all sewing machines. I guess that’s too much to ask, though. But, thank you for the demonstration. I’m getting ready to start a new quilt and I will definitely use this method.
You're welcome! Thanks for watching!
Thank you. Great info
You're welcome! Thanks for watching!
Mary I pin so how do you use the painters tape with pins? I’ve tried tape but get frustrated trying to use pins. Couldn’t figure out how to get around that.
I really don't have a problem with pins. I tape all the way down the front of my machine so the pins farther down the piece don't get caught in the tape (if I'm sewing a long strip). Otherwise, I'm careful to remove pins or keep them out of the way as I'm sewing and really don't have a problem with it. Hope that helps!
Thank you!
You're so welcome!
I press the quarter inch button on my old Viking D1 and that’s all I do. I don’t do any mucking around with measuring seams allowances etc. consistency is what matters
I"ve commented on this before...that works fine if all of your pieces are the same size. If you have triangles and rectangles and squares and are trying to put those together, you need an accurate 1/4" seam allowance or the puzzle pieces just don't fit. Thanks for watching!
I have the same machine, but I like to use the straight stitch throatplate and quilters foot. But then I sew VERY simple quilt tops!
This is a good DIY, but it is a bit fussy. There are several products out there that do this exact same thing. All very helpful to get a good scant seam allowance. However, learning to sew a scant seam allowance is an important skill to have as a quilter/seamstress because the tape method does not work for every situation, for example diagonal or stitch and flip piecing. PS your title says never sew a scant 1/4” seam…. but what you demonstrated was how to sew a scant 1/4” seam 😂
My point is that "scant" is a confusing, unmeasurable term and I don't use it when I am piecing or teaching. There is a follow-up video that answers some of the points you brought up. czcams.com/video/xYL3LhiXB2k/video.html Thanks for watching.
Thank you great method...❤
You're very welcome! Thanks for watching!
I gave up quilting because of "scant" 1/4 inch. This is a much better way. Thank you.
You're so welcome! I find it's so much easier than wrestling with "scant".
I use an 1/4 inch edge guide foot on my Juki. It keeps the raw edge of the seam against a vertical metal edge on the foot.
Yes - as long as it's accurate, that's a great option. Thanks for sharing - Juki is a great machine!
If you notice where she put it, it actually was a scant 1/4". Which is just a thread's distance shorter than a true 1/4" seem.
Also, not so on yep squares but if she had seen 3 or more and checked that's when it really starts show a difference.
I'm not sure I understand what you're saying in the second part of your comment, but as for the term "scant", my whole point is threads vary in width and the term "scant" is an unmeasurable term. I also have a follow-up video if you'd like to take a look. www.youtube.com/@joyfulandmerryquilting/videos
Would a magnetic seam quide work as well as the tape if you followed all the other steps?
I found that the magnetic seam guide did not remain in place with the vibration of the machine. The tape or Marci Baker's Sewing Edge Strips work the best. Here's the link: quiltwithmarcibaker.com/product-category/quilting-tools/
Thanks!!
You're so welcome! Thanks for watching!
I have found a hat as long as my seam allowances with a quilt are all the same, even if a little more than quarter inch, it all works out just fine.
Thanks for watching.
Best answer! I absolutely agree. All my piecing seam allowances are the same size. Therefore, everything fits together perfectly.
THANKU SO MUCH... MY NEW HERO
You are so very welcome! Thank you so much!
Thank you for the video and the clarification of what the scant seam is and how to rectify the problem. I have the magnetic gage and also a quarter inch foot. Since my quarter inch foot, I have sewn so much better. I'd like to ask why you don't use your 1/4 in foot? or was that just for the video and if people don't have one? The only issue I found with your method is the annoyance of re-setting everything up when you have to change your bobbin. Thank you again. Great video
I explained at the beginning of the video that I used my 1/4" foot to sew together two (2) 2 1/2" x 2 1/2" squares and I showed that the finished width after sewing them together should have been 4 1/2", but it was a tad short. I don't use a 1/4" foot because once I put the tape on my machine, the guide on the 1/4" foot is in the way of the tape and since it's not as accurate as I would like, I just don't use it. I don't really have an issue with removing the bobbin - I just do it carefully and I do have a tiny piece of tape (single layer) that I place on the end of the stacked tape and around the bobbin case lid to secure it. The single layer piece of tape is thin enough for my bobbin lid that it still opens and closes easily. I figure that the little bit of extra time it takes to change the bobbin, it's worth it in the end to have an accurate seam. Thanks for asking and thanks for watching!