Y’all missing the point. Act as if the precut bolt isn’t and it just so happened to snap on you. Then proceed. You people are impossible. Great vid bro.
There is no way a bolt that size snaps, but that tiny bolt extractor could break through the rust. The bolt extractor shaft is a fraction of the diameter of the bolt. A proper extractor would be near the same diameter of the bolt to even have a chance of breaking that bolt free. This bolt was definitely cut or weakened to get it to shear so easily.
Look close they took to a bandsaw like a haking saw it leaving lines of cutting they cut between the threads on each side enough to snap it that's why they took the flap wheel to clean it a bit smooth off imperfect surface so they could drill it if this were real it probably shear with a point that's how most of mine shear with a point like breaking a drill bit point is this is fake no fire no oil
phải nói rằng mũi khoan này bạn rất khó khăn khi thực hiện lấy ốc ra khỏi bàn ghế bạn cần phải dùng sức mạnh vừa phải biết cách làm nếu không loay hoay mãi mà vẫn chưa song đâu nhé,😊😊
@@toolsforworkif you shear off a bolt head that size 7/8 ish you would need 1000’s of lbs of torque to remove it, that little extractor used with an adjustable wrench wouldn’t work at all 😂
@toolsforwork don't know. Just recently. Bolt broke tap a spot for my bit. Drill a pilot hole, extracter just spins. Yes I'm going in the right direction
Y’all missing the point. Act as if the precut bolt isn’t and it just so happened to snap on you. Then proceed. You people are impossible. Great vid bro.
Thanks!
There is no way a bolt that size snaps, but that tiny bolt extractor could break through the rust. The bolt extractor shaft is a fraction of the diameter of the bolt. A proper extractor would be near the same diameter of the bolt to even have a chance of breaking that bolt free. This bolt was definitely cut or weakened to get it to shear so easily.
It was cut and disconnected, but the missing part was also taken out by the extraction tool.
Look close they took to a bandsaw like a haking saw it leaving lines of cutting they cut between the threads on each side enough to snap it that's why they took the flap wheel to clean it a bit smooth off imperfect surface so they could drill it if this were real it probably shear with a point that's how most of mine shear with a point like breaking a drill bit point is this is fake no fire no oil
Bolt was already cut before he put the pliers on. The grind marks are a dead giveaway.
Really?
What’s it matter it’s just a video showing how to use extractor bits lmao
@Ohrank exactly, it's just a video. What does it matter to you? Lmao.
@@Ohrankwhat does it matter to you?
So first cut through the bolt, then tighten it to snap it off, then beat in a stud extractor and remove with an adjustable 😂 nice.
normal process 😊
phải nói rằng mũi khoan này bạn rất khó khăn khi thực hiện lấy ốc ra khỏi bàn ghế bạn cần phải dùng sức mạnh vừa phải biết cách làm nếu không loay hoay mãi mà vẫn chưa song đâu nhé,😊😊
I hate it when I snap a bolt and it looks like someone cut it with a zipcut
But how to remove the broken bolt is really a problem.
@@toolsforworkif you shear off a bolt head that size 7/8 ish you would need 1000’s of lbs of torque to remove it, that little extractor used with an adjustable wrench wouldn’t work at all 😂
Di toko apa belinya?
Todos muy chingones a ver háganlo con el más pequeño
😂
Thank you very much!
You're welcome!
You are amazing mechanic 👏
Thank for teaching us 🙏
I love the music 🎶 too.
Thanks for watching!
Thank you so much for a short to the point video💯💯💯
Glad it helped
For smaller bolts, use a drill.
OK
It wasn’t stuck to begin with
So?
What kind of drill were you using to drill?
Alloy drill bit
надо было откручивать, а не закручиват.
distortion?
они так зделали шоб наверняка.со всех сторон подпилили.а то начнуть откручивать,а он возмись и открутись
Dosent work like that
Why?
@@toolsforwork because in my experience they don't work they will break before the bolt backs out
How do you get the.bolt of the extractor bit
That's easy, fix the broken bolt with pliers, then reverse.
Значит газовый ключ с таким рычагом не смог с разводной 😢бес проблем Н.... Ю где-то
Mainly it's not the wrench that works.
Try that with a smaller bolt
OK
Try this is a constricted space! Would it be that easy to extract?
You’ll know by actually using it
Bolt extractors never work for me lol
Why?
@toolsforwork don't know. Just recently. Bolt broke tap a spot for my bit. Drill a pilot hole, extracter just spins. Yes I'm going in the right direction
Болгаркой болт подпилен кому ты чешешь
Please watch the video carefully
نسبه النجاح اقل من 30%
Why?
como se llaman esas brokas?
brokas?
These comments lol.
?
But the bolt extractor snapped too 😢😢
This is unlikely to happen
Estoy en Colombia dónde puedo cmprar esa erramienta
Please wait for our online store
I like the way it has opposite thread.
Yes.
That's exactly how it's supposed to be.
Does not work .... dont waste ur money i bought the tool used it on a smaller bolt that that and it did not work ....
You may not be using it correctly
What size drill hole ?
M4
Con cosas muy adentro no funciona
deep in the heart?
Whats the name bore tool?
Broken bolt extractor
I been trying to drill. and my drill wont go deep into. The screw.
Please change to a better drill bit
Use metal drill bit bro
Try a broken bolt in metal
OK
Meron ba shop dto nyan sa manila?
No.
turn music off
Why?
Mine broke when I was trying to remove it. Now I have to remove that too! Any suggestions ?
You can also try welding.
What extractor set is that?
Broken Screw Extractor.
Stud extractor
wow
😂
Which type of bit i should use if want to drill hardened steel ?
Alloy drill bits can do it
Победитовое или вальфрам
❤️💯👍👌
😊
Righty loosey
So?
Nice joke
Joke?
@@toolsforwork sorry clicked on the wrong short to reply to.
Avant du dégripant !! voilà voilà
Where?
W prawo się dokręca lipa
?
Hm?
Robot?
Quá ok
😊
Приварить гайку и все
is also a solution.
@@toolsforwork 👍
sirl tari mano piko
?
The background music 🎵 😂
Like it?
These bolt extractor only works for midly and loose bolts. I have broken more than getting loose.
Maybe?
How the F did he break with channel lock
It has been cut with a grinding disc before that
@@herresproductions6567 absolutely
what is channel lock?
@@toolsforwork adjustable pliers
Stop breaking the bolts by overtightening them 😅
This is to better demonstrate the tool removal
Staged
?