Yamaha XSR700 - All Modifications and Upgrades
Vložit
- čas přidán 30. 07. 2024
- For more photos and XSR inspiration, head over to my Instagram @ballamoto
ballamoto
Hi guys, it's long overdue, but I've finally made a video to run through all of the mods and upgrades on the XSR.
I've had quite a few questions about what's on my bike so I thought I would make one video to run through the whole lot.
I forgot to mention in the video that I have had the ECU Remapped by Wiz Performance in the UK, but I have a separate video on that if you're interested!
Below you can find the timestamp for each upgrade/accessory, and the link to where to buy it. The Amazon links are affiliate links, so I will get a small kick back if you order through them, just for full disclosure!
Thanks For watching, and I hope you enjoy!
Timestamps and Links:
00:00 - Intro
1:47 - Pirelli Scorpion Rally STR Tyres
2:15 - SW Motech Fork Sliders
sw-motech.com/en/bike/YAMAHA/...
2:43 - JVB Moto Fork Gaiters
www.kedo-jvb-moto.com/xsr700-...
Upper fork covers (parts 20, 22, 2x24, 2x23)
www.partzilla.com/catalog/yam...
3:03 - Zippo Pouch
amzn.to/3mWa7q4
3:21 - Brogue Headlight Builder Kit + Short 3D Brackets
broguemotorcycles.com/collect...
4:17 - Oxford Nightrider Indicators
amzn.to/3FMyGP3
4:53 - TripMachine Leather Grip Wraps
www.tripmachinecompany.com/co...
5:20 - Brake/Clutch Levers
6:02 - ABS Button
6:35 - Brogue Gauge Relocation Kit
broguemotorcycles.com/collect...
7:16 - USB Ports
amzn.to/3BLVJHf
7:38 - Bar End Mirrors
amzn.to/3vfORPO
8:11 - Radiator Guards and Grill
Side Covers:
www.cmsnl.com/products/radiat...
Grill:
www.yamaha-motor.eu/gb/en/pro...
8:39 - Givi TN2130 Engine Bars and Ibex Bash Plate
Bars:
amzn.to/3p5pqPW
Bash Plate:
kglracing.com/shop/motorbike_...
9:05 - Gilles Tooling Oil Cap
www.ebay.co.uk/itm/YAMAHA-XSR...
9:27 - SW Motech Gear Lever
sw-motech.com/en/bike/YAMAHA/...
9:55 - SW Motech Kickstand Foot Extension
sw-motech.com/en/bike/YAMAHA/...
10:17 - Urbano Bruni Side Panels
www.urbanobruni.it/en/ub-acce...
10:46 - Tank Bag and Rack
Bag:
www.yamaha-motor.eu/gb/en/pro...
Rack:
www.cmsnl.com/products/tank-b...
11:09 - Seat (Original seat, reupholstered locally)
11:39 - Ohlins Suspension
STX46 YA419 - I suggest you buy through an Ohlins dealer and select the correct spring for your weight. I used BG Motorsport in the UK.
12:57 - Brogue Heel Plates
broguemotorcycles.com/collect...
13:21 - Evotech Tail Tidy
amzn.to/3mWvoQD
13:53 - SW Motech Bottle Holder
sw-motech.com/en/products/lug...
14:30 - Akrapovic Titanium Exhaust (MT07)
www.motocard.com/en/exhausts/...
15:23 - TripMachine Tool Roll
www.tripmachinecompany.com/co... - Auta a dopravní prostředky
Hands down the best XSR I've seen. Nice one Matt.
Thank you very much! 🙏👍
Those scorpion rally tires are perfect! And I’m digging that green tank armadillo seat combo too! Nice work!
That is the best-looking XSR 700 (imo) that I've seen. Beautiful bike 💯
Hey there I know this is an older video but just want to say I love these and please keep making them :). Such an amazing bike, location and video quality. Cheers m8!
Thanks a lot, really appreciate it! 🙏👍
This is the short of bike i would like to have, multifunctional, confortable, beautiful and unique!! Great job 👏👏👏
Thanks a lot! 🙏👍
You would think that some of those mods should have come stock. Then again, the price would be higher.
Yeah, keeping the price low allows people to pick which mods they like. But your right, there's a few that should be standard for sure!
Beautiful bike, inspires me to get my hands on an XSR. Also, beeeeautiful backdrop - big ups to the foresight in picking the location.
Thanks a lot, I appreciate it!
Great video. It's making me want a xsr 700 more and more! Returning to biking after 5 years away from it. Love that green tank on the bike and the mods really make it look even better. I think for me a rear suspension upgrade and the bash plate with bars are going to have to be my first upgrade. When I finally get a xsr that is 😀
Thanks a lot!
All the best with it, I'm sure it'll be an amazing feeling to get back at it after that long! 👌👍
One of the best XSRs. Great video
Very Nice video and mods! Cheers for making it for us
Thanks a lot! No problem 😁 been long overdue!
Great bike , love the mods you've done and how you use it, I was going to get an xsr but then the trident came out and just caught my eye more.
Thanks! Yeah that's a great looking bike 👌
Very cool set up mate 👍🏼
Beautiful details mate! Love it 🔥
Thanks a lot! 👍
Nice one bro! Keep it up 👌
I enjoyed watching your video as I have the 2021 XSR and want to change suspension and add other components, great ideas and long shopping list!
Hey man, love the video, ive a 2022 XSR ordered for april. Have already ordered so many parts based off your mods. Beautiful bike.
Same, thanks Matt. Looking to get a 2022 XSR myself, this has given me ideas.
bought a Triumph Scrambler 1200XC in may and at 3600km of road riding to work it as been in the dealer for repair for a month now. should have stuck to Japanese made like my previous bike, specially now that i have seen this bike with the mods.
nice job
Haha! Ahh that sucks, hope it's fixed up soon 🤘
Wow... Another XSR 700 owner... I really love this bike... New subs here from Philippines... RS brother....
Great video Matt 👍🏻
Just discovered your channel. Great content and a lovely bike! Subscribed 👍🏻👍🏻
Thanks a lot! 🙏👍
Beautiful bike and presentation 👍
Thank you very much! 🙏👍
Oh man. The green and the brown. With the gaitors. Nice dude. Nice.
Thanks a lot! Appreciate it 🙏👍
I loved this, i didn't know you have a youtube channel, I like your Instagram photos very much.
Thank you very much! 🙏 👍
shes a beauty mate !!!
Many thanks for this video !🙏🙌
And thank you for watching! 🙌
amazing bike man u r lucky to ride it
in my country we only have xsr155 and xsr900. but i want xsr700 the most. still waitng for it.. the best xsr i've ever seen.
Awesome bike! Have you modified the front suspension in any way? How do you feel driving bad gravel roads with this suspension? Did the Ohlins rear suspension improve riding in bad roads?
Hi, nice to hear an English guy with a comprehensive vid about what he’s done to his bike. Utube is full of septic upgrades an show ponies. Me “like yourself” rather ride it then clean
It, have a tarmac version, (at my age I can’t afford to brake any more bones ☹ I think I’m about your age x3) but love your aggressive look. Will be getting the tool roll, love it an as you say, better the Yamaha’s version. I went for K-Tech front cartridge fork kit an rear shock (95kg rider) both fully adjustable, totally different bike. Will sub just to see what you get up to. 💪
Thanks a lot for the comment, really appreciate it! Glad you like some of the mods here.
That tool roll is great. I did modify it a bit to get it to roll, as opposed to fold up. I pulled out a couple of the rivets from the strap. Prefer the rolled up look to the purse look! 😂
Thanks again, hope you stick around for more 🤙
Just tradet in my MT-07 for a XSR700. Picking it up today and can't wait to start modding it.
Nice choice! Same beastly engine, more stylish design 👌
I liked how grubby it looked shows real use. Great bike.
Thanks a lot!
beautiful bike brother
Thanks a lot! 🙏👍
Absolutely lovely handlebars leather wrapping
Thanks! One of my favourite bits!
That green is one of Yamaha's best colors around. I have an XVS950 C-Spec in the same color and now I don't think I could stand to have a bike in any other color lmao
Great job 👏 👍🏽 👌
Thanks a lot ✌️👍
Wow, this bike is gorgeous. Exact bike I want. Does anyone have a preference in year for the XSR 700? What year is this XSR and is it easy to get any color (the green looks good though)?
Nice vid
Thanks!
L21 👍, nice share, love this bike, offering support to a fellow motovlogger, stay connected, blessed and safe on two wheels, your biker brother Traveller MIA 🇬🇧
Excellent review of the bike in pure English.
Thanks a lot!
I'm not being funny. But I LOVE the fact that you didn't clean it for your detailed shots! It really showed the character of the bike.
Hi there...I'm slowly but surely, as money will allow, turning my XSR to look like yours. I have the STR tyres now ready to be fitted, but showing my ignorance: do they need inner tubes or will the factory-fitted ones work perfectly?
Also how do you do the oil and filter change with the engine guard and crash bar, do you have to remove it all?.
Also i'm planning to add the center stand, would that be possible with the engine guard, because they are both hold in the lower pegs area where the engine guard is screw.
bro i love your bike
Thanks a lot!
Amazing bike with crazy mods!! Love the colors going on with green and brown!! Really dope mate!!🦾🦾 keep up the great work! How have the scorpion rally str‘s been holding up on tarmac? Any kind of vibrations? Grip level compared to sport touring tires?
Thanks mate 🤙 so far they've been really good! No vibration or whining at all on the tarmac, and really confidence inspiring. No slips yet! The reviews seem to be holding up 👍
Really appreciate the detail on the mods! I did Lanespliter bar end mirrors on mine. Have you found screw plugs for the old mirror mounts? The left side was easy to sort but the right side seems to be a different size - not found one that fits yet.
Any problems with the headlight and the MOT? I heard they were changing the rules on aftermarket LED.
Thanks for the vid. Keep it up!
No problem, thanks for the comment!
Both sides are identical on mine, and these mirrors have 2 selectable collars, so I just used the narrower collar on both sides.
No problems on the MOT, but I have a "friendly" MOT guy! 😂 So that might have made a difference. Aftermarket LEDs used to be illegal, but since last October there are laws for them. But this is a cheap shitty amazon LED so I highly doubt its truly legal 😅
Bike looks great! For the TripMachine wraps and tool roll do you have "tobacco tan" or "tobacco brown"? I think tan and maybe it's just aged a bit darker but it's hard to tell. I'm considering both wraps and roll and the colour you've got looks perfect. Thanks!
Awesome bike bro! I’m looking for exhaust for mine. I don’t want something obnoxiously loud but also not too quiet. Could you go more in depth with what you did to your Akrapovic exhaust
I probably won't be doing a video on it as I try to not remove it anymore, it's difficult to do without damaging the baffles. But there are a few videos on the drilling holes method. Just follow that, but cut the pipes in half instead! All the best! ✌️
Hi Matt!
I love your mods !
I also got the evotech tail tidy but I can’t find adapters to fit my small led turn signals. Got a pair but they don’t fit correctly. Where did you get yours ?
Thanks 🙌
Glad you found them in the end 👍
Very nice mods, colour theme looks excellent, nice one. For your grip wraps and tool roll, have you gone for the vintage tan or tobacco brown in this case?
Thanks a lot 👍
I went for the tobacco brown for both ✌️
Amazing bike! Congrats for your modifications. What leather jacket do you use? Does it have the protections included? Thanks!
Thanks, appreciate it 👍 that's the Merlin Stockton. It comes with all except a back protector, but has a pocket for one.
Hi Matt,
Beautiful job! Just had the gaiters delivered and haven't started the job yet. Once you have the forks off how do you remove the original plastic fork protectors?
I think you just have to use a bit of force, but I'm not too sure. I bought my bike with gaiters already on it (not these ones, but the Yamaha ones), so I never had to take those plastic covers off
Thank you for the information. As a Yank, I must say that the British method of adding accessories has not changed since it was established by your pre-WWII aircraft designers: There Is More Room on the Outside of the Machine Than on the Inside of the Machine. I pick up my new XSR-700 from the dealer three days from now.
I can't seem to find the upper fork protectors anywhere - where did you get them? By the way: your bike looks amazing :)
Ah yes, I forgot those! 😂 They're off the MT07, I got them from Partzilla. I can't remember thr exact part numbers, but a quick search on the forums or Facebook page and you should find the info! ✌️
Thanks a lot! 👍
nice XSR 700, nice guy, I so sad when XSR 700 not sell in Vietnam
Great vids mate, I’m looking for an xsr 700, that’s what brought me to your channel and you’ve proved it can literally do everything on 2 wheels. Do you still have it?
I’m hunting for one now but I only have 4k so struggling a little. I can’t believe how underrated they are. 185kg 70hp and with the right upgrades can trail. Amazing
Hey! Thanks for watching. I definitely still have it, don't think I'll ever part with it now! 😂
Head over to the "Yamaha XSR700 Enthusiasts" or "Yamaha XSR700 Owners" Facebook groups and you'll find loads of helpful people and info. And maybe even some bikes for sale!
@@ballamoto great tip thanks, any plans to return to socials? The contents great mate.
@bencluroe4183 I do, but I've been saying that for a while now! A few too many things going on for now, but I'd like to get back behind the camera sometime.
Love it! I have a Fj09 that I want to change to a similar style, what size are your tires?
I can't remember off the top of my head now, but they're the standard size for this bike. Something like 180 rear and 120 front 👍
Hi Matt- Do you know what type of adapter is needed for the USB? I see that the USB you linked is an SAE plug so would it be SAE to female Auxiliary?
If you want to plug it into the switched DC plug on the left side of the bike under the side cover. Then you'll need a Yamaha DC adapter. You can find them on ebay. Alternatively, the bike should have a dummy plug already plugged into the dc socket, so you can just buy the crimp connectors for it and use that. There is some more info on the Facebook forums etc.
Hi just got the brogue headlight, struggling with the short brackets, any tips?
Also did you have to alter the headlight in any way for use on uk roads?
Thanks
Hey. I had to manipulate the bracket below the headlight for it to fit and angle properly. I bashed I back and down a bit. Once I Hadd done that, it fits great. Might take a few tries to get perfect though. Patience may be needed! 😂
Hi there - any chance to get the contact to Glen about the seat?
Great video! Love the mods! Question about the fork covers. How come you have to get part #22? Shouldn’t part 20 be enough?
I can't remember what part 22 is. Can you remind me? 😅
@@ballamoto #20 = cover, #22 = tube outer (L,H) #23 = inner tube comp 1 and #24 = piston, front fork. It seems like a lot just to put the cover around the front fork.
@@pbneeks 20 and 22 are the right and left fork covers, 23 are the rivets, and 24 are the O-rings.
Hi Matt. Love the bike. Great video. You mentioned that the seat was the original and was reupholstered. I assume they shaved down the back of the seat to get rid of the hump, or was the seat the flat seat. Thanks.
Hi, thanks very much! I believe he did a bit of reshaping, yes. There is still a bit of a bump towards the back but it's a lot more gradual. He also added a thin layer of foam to get the bumps between the stitching, so this probably also helps to smooth out the curve ✌️
@@ballamoto thanks Matt
Hi, can you do a video where you demonstrate the crash bars impact zone here or your insta (you can do it in grass or with towel in the pavement), i know is can of silly but request, , i wanted to use that crash bars but i see them to close to bike and not outwards also to low and not high, and i wonder will the bike tilt up and hit tank or handlebar or there will be a gap so there is space and that would it happen. PS and not says to throw it to the ground just gently placed or hover it close to the floor plane.
I've actually crash tested it at 30mph once.. 😂 They are a bit low and it can rotate towards the tank a bit, the bars still obviously hit the ground too, but it still offers some great protection, and when I crashed it only marked the bars and nothing else. I don't think I'll be laying it down in a demo any time soon, but we'll see!
This bike looks the business. Really informative video. How many miles has the bike done? I have subscribed.
Thanks! Appreciate it. Not too many to be honest! I'm a fair weather rider 😂 about 15k
Awesome setup. Does anyone know if the engine guard fits the 2022 model? Thanks
Should do!
Very beautyful bike bro, What’s handle bar did u fit for the scrambler feel, looks so nice
Thanks mate. It's stock! Just rotated up a bit for a better standing position
Did you need relays for the oxford indicators?
The bike looks like it will scrape the road on cornering. Had issues with that?
Man im interested in one didnt know u could take them off road .how much off road can u do with that type of bike.i ride a dual purpose. Woukd love doing something like that
It's definitely a road focused bike, and probably shouldn't really go off road much, but I've definitely put it through its fair share! 😂 It's the ground clearance that limits it really. Only a few inches. So if you'll be doing a lot of off road, it's probably not great. But it handles the odd bit and gravel tracks really well!
Great walk through Matt! Did you need an adapter to fit the rear turn signals on the tail tidy? Looks like the mounting slots are sized for the original turn signals? Thanks!
Thanks a lot! Yes, you'll need to grab some adapters. Should be able to find them on ebay. Either search for Xsr700, or Mt07, turn signal adapters 👍
(I got the flat type, not the bulgy ones. You'll need 2 per side, for inside and outside of the tail tidy)
@@ballamoto Found them on ebay and my local shop has them in stock! XSR 700 Turn Signal Adapters got me right too them. Thanks again man!
@@TomSoundsGood that's awesome! No worries mate, ride safe 👊
@@ballamoto Hi Matt. Could I please trouble you for a bit more detail? I can't find anything that resemble what I see on your bike (looking at 13:30), and the bulge type Oxford spacers I have definitely don't work well with the Evotech tail tidy. Any clues on how to make this work?
Hey! Just wondering if you have bar raisers? If so what brand and where from?
No risers, just rotated the bars a little to give a more comfortable angle for standing 👍
Hey Matt! What jeans are those you're wearing in the video? Thanks
Those are the Bull-It Bobber jeans. The new ones are fully single skin and AA rated.
Another great pair is the Oxford AAA single skin jeans. Basically normal looking jeans but AAA rated! And only about £150, win!
Can a 1m63 person support their feet with the yamaha XSR700, thank you
what kind of bike pants do you wear? love your helmet. nice video!
Thanks very much! These are Bull-It Bobber jeans 👍
did you change the front springs? well put together video.
Thanks mate! No, I didn't change the front yet, I'm so light that the front springs don't affect me as badly as some others. I am considering stepping up the weight of the fork oil at the next service though 👍
@@ballamoto I changed to the Progressive Springs and fork top pre-load/ride height adjusters from tec bike parts. under £100, I would say the first change I would make if I did another one. did you get it remapped when you put on the new exhaust? I did a walk round of mine on my youtube only thing I have added since is the continental 80's tyres
Class 👍
I love to know the total spend on your modifications 🤔
Thanks! 👍
are those bar ends street legal? especially if the mirrors are installed upside down in our country thats illegal
Not a legal requirement to even have mirrors in the UK 😂👍
Grabbed a cup of coffee for 16 minutes video...........
Is that coffe termos stays hot from the engine ? becouse if it did that would be a 200 IQ mod :P
Haha it does indeed! 😂 Not that I need the engine anyway because this thermos keep coffee at nuclear temperatures for about 12 hours! 😂
hello,
Is the IBEX Bash Plate compatible with the Akrapovic Carbon exhaust line?
It is with the euro 4 or 5 version. Not so sure about the euro 6 version
Actually, I should say you will need to modify the bracket slightly, like I have in my other video about the bash plate 👍
@@ballamoto thanks 😉
Are the knobby tires not too rough for street riding?
Nah, these are the STR version, so made for the street too. In fact more street than off road (70/30). They have a surprisingly smooth profile 👍
schöne XSR !! viel Spaß damit !! aber etwas Kettenpflege und Reinigung würde ihr bestimmt auch gefallen 🤪😇🤣
Haha you are definitely not wrong!! 😂 She needs a bit of love and maintenance 😅
Hello, what jeans do you have?
-Tell me you're a hipster without telling me you're a hipster.
-I have a coffee holder on my bike.
no hate haha
Hahaha!! 😂 Best comment. Can't deny this. My only defence is I have no beard!
Howdy! Wondering how you went about installing that ABS button 👀
I've got a bit of information over on my Instagram stories. But as for the full demo, I've not got around to that.
Basically I made a little harness to splice into the front abs plugs (right hand side of the headlight) and add a simple on/off switch to break the abs circuit 👍
@@ballamoto Ahhhhhh rightio. Sounds easy enough to do too. Much appreciated man 😊😊
@@reubent936 it's surprisingly easy! Even if you want to make it fully reversable. No cutting cables, no nothing! If you can find the same plugs as the existing ones, it'll be plug and play 👍
Good luck!
That jacket is awesome, do you mind telling me what brand it is?
Thanks! Sure, it's the Merlin Stockton jacket 🤘
@@ballamoto sweet thanks!
MERCI
Great video, can you describe your outfit too?
I like it!
Dream bike! What is your helmet tho?
Thanks! That's the Bell Moto 3 👍
I’m 5’11 would this bike fit well?
Yeah I should think so! It is a pretty "small" bike, size wise, but I know taller people who ride it. I'd suggest going and checking one out at a dealer!
What size are the tyres?
17s front and back. 180 at the rear, and 120 at the front 👍
Any hard cases?
I use the Givi MT501 cases on road trips 👌
Moving up to the bar as in handlebar not handlebars
What abt the tank cover
What do you mean? Which tank cover?
this is 2018. year bike?
It is a 16/17 model, just not bought and registered until 2018 👍
Could you do a motorcycle gear video?
I was thinking of doing a gear series. What in particular are you interested in?
@@ballamoto Gloves, boots, helmets, and really anything you might recommend a new rider.
@@J10k I will see what I can do! 😂
How did you pronounce akrapovič?
Probably incorrectly! 😂
fcเลยครับ
象印のポットがとてもかわいい😚
Hey! You forgot your phone.
The music adds nothing but a distraction.