API Bird Bath De-Icer Repair. No More Blown Circuit Breakers.

Sdílet
Vložit
  • čas přidán 29. 08. 2024
  • www.fixitforge... As an Amazon Associate I earn from qualifying purchases. I repaired 3 API - Bird Bath De-Icers that were shorting out and blowing circuit breakers. A little JB Weld around the power cord where it enters the de-icer housing did the job.
    Visit our website, www.fixitforge..., for more DIY projects.
    SONG: Acoustic Meditation 2, ARTIST: Audionautix, LICENSES: CZcams Audio Library.
    Here are some affiliate links to the products mentioned in the video. Thanks for stopping by.
    API - Bird Bath De-Icer with Aluminum Base, 250 Watt.
    amzn.to/3FwUE9S
    Plug-It Ground Fault Circuit Interrupter (GFCI) and Surge Protector Plug.
    bit.ly/494amqn
    Electrical Receptacle Tester AC Outlet Plug 3 Prong GND.
    amzn.to/3tJhFDI
    General Purpose Extension Cord, Orange, 15-Foot.
    amzn.to/3QcLeVG
    J-B Weld 8265S Cold Weld Steel Reinforced Epoxy with Hardener, 2 oz.
    amzn.to/3MgQUwG
    Small Straight Screwdriver - 2PC Pocket Set
    amzn.to/3s223L9
    Sunnyside 1 Pint Denatured Alcohol.
    amzn.to/477GOXb
    Vargo Alcohol Fuel Bottle.
    amzn.to/477GYOh
    Lacquer Thinner, 1-Quart.
    amzn.to/46Y37yi
    12 SUJAYU Brass Brushs.
    amzn.to/3tUzUpC
    9 Mil Powder-Free Nitrile Gloves.
    amzn.to/3CC0llb

Komentáře • 6

  • @firefighternuge
    @firefighternuge Před 6 měsíci +1

    Thanks, will give this a try… bought ours just 5 months ago and started tripping breakers just a few days ago…

    • @Fixitforgetit
      @Fixitforgetit  Před 6 měsíci

      My pleasure, firefighternuge. These heaters are very disappointing. Good luck with your repair.

  • @user-pp4cp6tk7y
    @user-pp4cp6tk7y Před 10 měsíci +1

    Excellent video. I just bought a new one of these. Would silicone caulk work to seal the cord?

    • @Fixitforgetit
      @Fixitforgetit  Před 10 měsíci +1

      Thanks for your kind comment, Mark. My experience with silicone has been that it tends to break loose and peel off after a while. In a harsh environment like this, I don't think it would last nearly as long as JB Weld. Thanks for stopping by.

    • @user-pp4cp6tk7y
      @user-pp4cp6tk7y Před 9 měsíci

      @@Fixitforgetit Heading to the hardware store for some JB Weld!

    • @Fixitforgetit
      @Fixitforgetit  Před 9 měsíci

      My pleasure, Mark. Good luck with your repair.