Zero 10X Performance Settings
Vložit
- čas přidán 26. 06. 2024
- How to use the P Settings on a Zero 10X electric scooter to optimise speed and acceleration.
Detailed list of P-settings : i.pinimg.com/originals/76/30/...
Removing speed limit: • Zero10x 60v 21Ah unlo...
00:00 Introduction
01:27 Setup
02:23 Test 1: Power=100, Acceleration=5, Gear 1, Turbo
02:52 Test 2: Power=100, Acceleration=5, Gear 2, Turbo
03:05 Test 3: Power=100, Acceleration=5, Gear 3, Turbo
03:12 Test 4: Power=100, Acceleration=5, Gear 1, Eco
03:21 Test 5: Power=100, Acceleration=5, Gear 2, Eco
03:28 Test 6: Power=100, Acceleration=5, Gear 3, Eco
03:34 Test 7: Power=100, Acceleration=1, Gear 3, Turbo
04:17 Test 8: Power=100, Acceleration=5, Gear 3, Turbo
04:22 Test 9: Power=100, Acceleration=5, Gear 3, Eco
04:34 Test 10: Power=40, Acceleration=5, Gear 3, Turbo
04:43 Conclusion - Auta a dopravní prostředky
Thank you, very interesting. I just put a deposit on one today and pick up on Saturday. Your videos helped me decide.
Hi Carl, thanks for the positive feedback. Enjoy your new ride !
Have the same scooter, and love It. 😀 👍👍👍
I got my new Z10x, and was first wandering if it was a defect regarding the turbo /Eco mode. and realized that the Eco is 33km/h no mater what gear setting .. thanks for confirming your results ;)
you probably dont care but does someone know of a tool to log back into an Instagram account??
I was stupid lost the login password. I appreciate any assistance you can give me
@Jordy Uriel Instablaster =)
@Tommy Samson i really appreciate your reply. I found the site thru google and I'm trying it out atm.
Looks like it's gonna take a while so I will reply here later with my results.
@Tommy Samson It did the trick and I actually got access to my account again. I am so happy!
Thank you so much, you really help me out !
@Jordy Uriel Happy to help xD
So will it be possible to pop it on a setting that it will only go like 25 kmph, in case i ride around in town? here in Denmark is 20 kmph the max but most scooters runs 25-30 kmph. I am looking into getting one for joyrides but also to commute til and from work.
Hi, with the Turbo button depressed the scooter will top out at 25kms/h, no matter what gear you are in. The other way to force a 25km/h limit is to set the P8 setting (Power) to 40(%). Then the scooter will not go above 25km/h. That is how the scooter ships in my country (Australia). Happy scooting!
Fantastic information, I don't have the 10x but I have the same P-settings and throttle - Changing P-12 to 4 or 5 makes a huge difference for my scooter SK-11 Realmax 8000w 60v 60Ah - made this scooter even more brutal
Glad you found it useful Tim ! Yes, the Realmax looks to be a real brute !!👍
I have just came across this video and I have done this same test with my 11x and mine is opposite as in number 1 setting on p12 is the max torque/power and 5 is the weakest.. strange really as I think they are same controllers. If anyone else can check their 11x it would be much appreciated..
Im done on my scooter 3700 km and i just discover this, tommorow i will try on 5 because all the time number was 3 and still beast 😁
Hi man, nice video!
I'm thinking of getting the 10x, and in my country, we also have the limitation of 25kmh.
Let's say I set the power to max according to your video, and I give my fg a ride along with me. together we weigh about 150 kgs. Will this burn the motor?
Tnx!
I have a zero 11x and have added a LCD throttle(thumb)now I change the settings to exactly the same as the original LCD,but now the thumb throttle when pushed doesnt do anything it wants to but it doesnt,just wondering if the P-settings for thumb throttle are different,so i unplugged it and plugged old one back in and it worked fine,dunno whats the issue
Hey brother, when I press the 2 buttons to enter the settings, a code opens that I need to do and only after that can I change it, do you know what the code is?
oz zero x buyer, thanks for this, by increasing power hill climbs are much faster and turbo and eco now serve a real purpose. I think its good to some degree its limited on purchase as I was new to scootering and prob would of got a bit carried away before lots of practice at lower speeds
Fair point Scott. I didn't change anything until I felt confident at lower speeds.
@@MarksElectricLife haha glad I stumbled upon your video at the right time as well as the steering damper one
@@scottd1847 Thanks Scott, yeah, I consider a damper to be an essential accessory for this scooter.
please the PAS is not working with this controller ? what is the reason , i used 3 different pas and not working , thank you
Please what is the code in Zero 8 ??
Thanks for the help🙏
How a bout modifying eco/turbo and single/dual buttons into push buttons? Use turbo and dual while ure pushing, when u remove finger its normal
On a 10x 52v is the p7 supposed to be at 28 or 30 ?
I just got this today! Much bigger than it appears. Heavy af! Powerful! Scary! I've ordered a damper for the steering.
Do you know how to change the break lights from flashing to just intensity?
Hi JC, sorry but I don't know how you would do that. It is not available through P-Settings. You would probably require a different chip.
@@MarksElectricLife I seen it somewhere on YT. If I come across it, I will link you. I got 45mph today. That's more than enough speed for me!
Hey. I accidentaly change the cutoff voltage and i dont know, what was it. Cud someone write it to me.
How do i make my eco a little faster?
I just bought a new scooter and the single motor works but when I try pressing the “Single dual” only 1 wheel works
Mine only does 50 how do i get an extra 10km speed out of it??
I am trying to enter programming mode but instead of P I see a big 50 on my screen and 4 digits that I can change, but every time I change them they reset
Me too
Just had a close call. I was riding my 10x today and reached 65kmph (I had cruise mode activated) and when I activated the brake, I think my electronic brake locked up the rear wheel, I almost lost control. I immediately disengaged the cruise and electronic brake settings. I am just wandering if this is a general problem or I have a faulty controller. Please let me know if this is a known glitch.
Geez Brian, that sounds like a nasty little surprise! I haven't heard of that before but I know electronic brakes can be a bit brutal in their application. For that reason I only have mine on the lowest setting (1). I think the issue is that they use magnetic flux from the motors to create resistance against the wheel spinning. My theory (happy to be challenged) is that the flux is greater at high speed than low speed. This means you get more braking force when applying at high speed than you would at low speed. Hence, your locked wheel experience. This also matches my low-speed experience where they don't seem to make any difference, even on the highest setting. Stay safe !
@@MarksElectricLife many thanks, your theory makes sense, I'm going back to value 1
Does it work gpad joyride
It does not work for me someone help me
Where enable turbo mode
Hey I did all the right settings and I’m only getting like 55khm out of it
hello, I also just got my zero10x 23ah but it doesn't exceed 25kmh! can you tell me how to unlock it? i would like to use it on private roads but i can't unlock it :) thanks !
Hi, there is a link under the video to another one that shows you this.
@@MarksElectricLife does this solution really work... because at first he had mode 1 turned on and then mode 3... idk why but i dont trust the link you send bellow.....
@@danielzidar2210 Sorry, but I can't verify the information in other people's videos. That said, I know that you would never get to 90km/hr on the display with a speed limiter installed, no matter what gear you chose. Listening to the noise from his motor it sounds like mine at top speed.
My setting is like a 50 or So how do i change that to P? Whats the code? Somebody?
Hi Nora, these instructions are only for the QS-S4 display, as found on Zero 10X, Turbowheel and early Apollo models. To go from normal mode into P-settings you need to hold down the Power and Mode buttons simultaneously for more than 3 seconds. Then you should see the "P" displayed. Each push of the Power button then advances the parameter that you are setting. Hope this helps ! Mark.
You make no mention of the other switch ie single\dual. When the button is pressed in, is that dual?
Hi Kyle, you are correct, when the single/dual button is pressed in you have both motors driving. Sorry I left that out.
Hi can anyone help with my 11X please? What exactly is the voltage cut-off and why is it set at 52 V when it's 72 V?? Unsure why and of the cut-off purpose. Also, what should the magnetic setting be set to and why. Thanks for your help in advance.
hey bro where did buy from ? maybe contact them ?
The voltage cutoff is the minimum voltage for the batteries to protect them from over discharging, which shortens the life of the battery. If you reach this limit, the controller lowers the voltage to zero then turns off the power supply. It won't reset until you start charging again.
If by magnetic setting you mean the regen breaks, i suggest you use 0 ALWAYS or else it will mess up your motors. Regen breaks are very bad at the moment.
Hi JI,
First, great review. Watcht it yesterday also..
To my question.
Today i had to pick up my zero 9 at the store after purchasing it last week. So i come home, me thinking... Ok i did my homework before purchasing thé scooter, a lot of tutorials watcht.. in Belgium it is complicated in regulations. It's 25km/h. Butt still... It's a Grey area.. Now. Here it Comes... Ik have run a few km's today to test it out, after charging... Ok, runs smooth.. ok. Nu now, on top off limmits and restrictions, that or still not really clear here in Belgium thé scooter only runs at 22km/h. (Laoded on unlaoded). So contreet.. after seeing your vid yesterday, you sound like you micht help, knows what he's talking about. Ik hope. Can you help me to get around thé speed limmetter? Of many a link to.. Specific for thé zero 9. There is not much, or nothing conclusif and helpful to find. Or Else ii've been looking in thé wrong places.. idk? A lot of tutorials for zero 8, 10, 11... But 9?
I Paid €1090 for something i wanted to use, even tomorrow and thé day after.. and after. Butt, with bearely 22km/h.. Its .. just... to.... Slow. Hope you can help out. Btw; sorry if not every word is written right, greetings from Belgium! Grtz! Niels.
Hi Neils, thanks for the positive feedback !
I don't know much about the Zero 9 but I believe this post might hold the answer for you: www.reddit.com/r/ElectricScooters/comments/jjieme/zero9_speed_limiter_help/
Good luck !
Hi.
I’m just wondering how I take my speed limiter off without cutting the wires?
Did all the above but this won’t hit higher then 25km/h
Hi Declan, in some countries the speed limit is only programmed using P-Setting. In other countries, where the authorities are more strict, it is hard-wired. Unfortunately, it sounds like yours is hard wired. If you have set P8 =100 and you have checked that the Turbo button is popped out, not in, and you still cannot go faster than 25km/hr then your scooter is hard-wired. In that case you have no choice but to cut the wires if you want to remove the limiter. Please note I am not advocating cutting the wires and I cannot tell you which ones to cut as I have not done it myself. Good luck though !
@@MarksElectricLife hey I really Appreciate your help all fixed.
It was wired :)
@@declansmith1022 Great to hear Declan! Did you cut the wires as shown in the linked video ? Also, which country do you live in ? This info may be of use to other Zero owners. Cheers, Mark.
@@MarksElectricLife yes i did all above :) and i'm in Australia. thank you again for your help
I mean my country is shit rn but... thats like limiting a corvette or lambo to 55mph.... so dumb lol
hey I spoke to the guy that sold it to me and he said that it will mess up the scooter if I change the factory settings, is he right?
Not if you know what you’re doing. You could damage something if you set the wrong values on motor magnets for example. You need to make sure you have downloaded the instruction sheet, that tells you which setting does what. Stick to power, acceleration and braking adjustments.
@@MarksElectricLife thank you, btw If I add more speed which means more power, wont that affect the motor? could it break something?
@@andreaschristofh1505 I have been running my scooter with power setting 100 for a year now without any problems.
hey mate, I weight 85kgs as well and the fastest I can get is 54kph. Is that normal? it's new btw.
Hi EDC, I mostly ride on one motor and it tops out at around 52kph but I would expect to get up to 60 on two motors. To be honest I don't really want to push it that hard and find it cruises more comfortably at around 45.
@@MarksElectricLife so you can get 52kph on a single motor? mine gets like 32ish. it's going back
@@Studat Yeah, sounds like there may be a problem there. Good luck !
Can u do the speed hack on 18ah if u can then how ?
Hi BG, it should work the same way since it has the same controller. If it isn't working then there is probably a hard-wired limiter installed.
@@MarksElectricLife thanks
Man, how do i reset it? 😂 i messed with it and i almost died on it :) is there any way to reset it?
Hi, not sure if there is a factory reset but if you click the link in the Description section it will show you what they are set to out of the box. Good luck! Ride safe.
Thank you so much. You just saved a life :)) electric brakes are the devil 😂
@@ChuppyCata Yeah, I don't use 'em. Glad to have helped !
@@ChuppyCata with the 60v version, electric brakes will overvolt and shut down the scooter!
People were top speed on zero 10 x was 65 only