How an RX 135 crank is rebuild and balanced
Vložit
- čas přidán 25. 03. 2019
- This is for the other dismantled bike you saw in yesterday’s video. Full details of rebuilding the crank and balancing it
#Yamakaze
Join the Yamakaze Squad today : / yamakaze
Follow us on instagram for project updates & more : / bossyamakaze
Find us on Facebook: / yamakaze - Auta a dopravní prostředky
I too have to get my crank repaired but Bro how to know which no. of crank rod needed. Coz I want an OE replacement for it. But I don't know the no. Coz I bought the bike from someone.
Take it to a lathe
Hey famous laythe near palayam 👍
Yeah
Hi
👍
Bro if the conncting rod nrb barring damaged in crank means wheather i want to change the nrb barring or both nrb and connecting rod
Everything needs to be changed
Sir please tell me the difference between rx 100 and rx 135 crank shaft, can I fix rx 135 canetic rod on rx 100 crank
Yes
@@Yamakaze Thank you Sir,
@@jlmvideo5714 👍
Does re-setting crank reduces vibration??
that's exactly why its done
Does the vibration leads to any bigger problems??
Bad bearings, uneven cylinder wear
When to do this process and what's the use ?
There is a video on how to check crank play, if your bikes crank has play it’s time to get it rebuild
Bro plz suggest best crank rod at reasonable price
Buy original
@@Yamakaze original is too much costly any other best brand ?
My crank shaft got bend. Do you have any idea about how this happened? (malayali aano leythil malayalam song kettu)
athe, crank connecting rod bend aavunath, 2T oil kitathe varumbol aanu, oil pump aano use cheyunath? annel athu onni adichu poi allengil 2T theernu kaanum
is this popular near bakery jn
sarin r yes that’s right, I only go to them, they are good at what they do.
@@Yamakaze they have a reboring machine right
sarin r they have 2 reboring machines
Bro ith cheyunenu ethravum
1000
@@Yamakaze ok
Bro please share my problem of taillight bro please 🙏🙏🙏
Damoder Sharma connect on the yamakaze Facebook page
Is it OE connecting rod?
Mohammed kamaal not OE, forgot the brand name, but is it a popular brand
@@Yamakaze can I use my old connecting rod
@@RahulGupta-ql8jy it’s not advisable to use old connecting rods is crank needs rebuild
Where is it located sir??
Roshan Pm Trivandrum
Sir I got my crank re-set n got oe yamah rod to my 135...yt my bike vibrates a lot ...what may be fault sir
you mean there is play? if there is play then its not done properly. Even if its balanced properly the installation of the crank can cause issues. Most mechanics use a hammer to install it back, that's not the correct method. Get a new crank if budget allows you.
Thanks for the information sir...I will check through it
👍
@@rakshithbs4372 bro vibration problem sloved?
@@jojofernandez2638 not yet bro
How much did it cost you Brother?
mjshaheed crank repair with new connecting rod is around 900
Hi... bro nte Rx 135 nalla vibration und crank balance correct alathathu kondano agane
Athu chance kuravanu, check t stem, chain sprocket, both wheel trueness and bearings
@@Yamakaze ala bro njn Ann engine set cheyithadhu ipo 2000km odi vandi vibration Nala rethik und ath Oru confusion
@@jojofernandez2638 vandi standil ninnu vibrate cheyunundo?
@@Yamakaze yes center stand itt rasie kodutha full vibration Ann. Petrol tank adakam vibration
@@Yamakaze reply please
Small doubt...these things come balanced from the factory yeah? Why do we need to balance them again ?
ZR1 Gamer once the connecting rod is replaced it goes out of balance and needs balancing again
Hi there,
Hi Yamakaze, you are living my dream. I have 2 RX 100s catching dust in my home, one of them has been with me from my college days. I am working in Oman at present and planning to by a RD 350 here, it is a Japnese import, which i have not seen it yet. Could you please suggest me what what are the critical thinks that i should check before purchasing.
Elavarasan Ramalingam there is an article I wrote on Tbhp on how not to get scammed while buying a classic motorcycle.
Should be able to answer most of your questions
www.team-bhp.com/forum/motorbikes/210452-how-not-get-scammed-while-purchasing-classic-bikes.html
Hi u Namper tharumo
Instagram only
Hey mahn how is you....the lol old mahn trys max to hide is technics 😛😛is not
I am not sure if I understood your joke
Horrible way to rebuild a fragile crank.
Dead blowing big end pin with hammer and trueing it again with a metal hammer😂😂😂
Poor crank
ever head of a metal called aluminium? The hammer is made up of that, these guys have build more cranks than you have thought about the word crank, so STFU and take a walk. crank is never fragile.