Bro , very good and informative video.thanks 👍. One more question ,,, what is the best sprocket ratio for rx 100 and which is the best brand in the market??
Hi.. i have rx135.. me too facing issue like this.. but i am not sure whether its because of bearings or piston rings.. is there any other way to contact you? So i can send the video clip of it..
Bro i need your help can you please tell me that where suzuki supra power up piston block kit,manifold and carburattor is available because i have a supra powerup bike and i want to restore it... Because at my side these parts are not available.🥺 Bro from where i got these parts online. I'm from Jaipur . I'm your subscriber also .. Please help!
Bro , I had bored my rx100 engine ,And I normally take 2 oil for 1 liter of petrol + I also take oil in 2T tank also ., Is this correct method of taking oil
I don't know what the problem with my rx100 l've all the things but it's still too slow today i changed the block engine but still it doesn't work. Help me bro. 😭
@@MotoGod bro thanks for replying. i guess my bike is having some trouble in cylinder block. there are lines in my piston. that will cause the problem right bro???
Hello bro, hope you doing well.. I did piston boring because of the piston problem.. After boring Also now I am hearing some interrupting sound and one of the known mechanic was telling that, it is may be because of the connecting rod issue.. Is that true ?
Bro back then I want to get it done but compression values will change if we do soo and that will effect the performance so I preferred to replace it and replaced bro ☺
Thank you so much bro..huge fan of motogod from kochi💜
My pleasure 😊
thanks about the video. now i knew the main problem
You are most welcome
Thank you bro ❤
Thanks for the video bro. Very useful 😎🙏👍
Thanks bro 😊
You are great
Thanks bro
Very helpful information 👍🏻
Bro , very good and informative video.thanks 👍. One more question ,,, what is the best sprocket ratio for rx 100 and which is the best brand in the market??
Stock is good
I agree but what's the best ratio.. 15 teeth front and 39 teeth rear ??
Yes this ratio is for initial and good mid end
Great information.
Thanks
Thanks bro 😊
Very Good Information 👍 Brother
Thanks bro 😊
Good info bro ,, was helpful
Thanks bro
hi bro....which connecting rod is best for rx135??? Is original one is available for rx135??
Bro please recoment good local con rod other than maco, ambika??
MB CON ROD
@@MotoGod ok bro
And so sur chamber or inbuilt chamber damges the engine and can we install chamber exuast on stock bike
You can install and use it
but I would prefer after porting would be a purpose for using inbuilt chamber
Nice bro👨🏻🔧
Thanks bro 😊
Hii bro 199 6 Shogun ఎంతమంది వెళ్లాలి?
Bro very helpful
Glad to hear that
Hi.. i have rx135.. me too facing issue like this.. but i am not sure whether its because of bearings or piston rings.. is there any other way to contact you? So i can send the video clip of it..
Instagram (_motogod_)
Bro i need your help can you please tell me that where suzuki supra power up piston block kit,manifold and carburattor is available because i have a supra powerup bike and i want to restore it...
Because at my side these parts are not available.🥺
Bro from where i got these parts online.
I'm from Jaipur .
I'm your subscriber also ..
Please help!
Message me on instagram (_motogod_)
Bro , I had bored my rx100 engine ,And I normally take 2 oil for 1 liter of petrol + I also take oil in 2T tank also ., Is this correct method of taking oil
yes you can do it
Bro can u please upload the video about how can i make my rx100 into 5speed gear.
Soon !
@@MotoGod 💕
Good Job man
Thanks bro 😊
Can i use max 100 or rx 100 connecting rod in shogun?is it possible
Not Possible but some says they can alter rx 100 con rod to shogun but i'm not sure
Nice video bro
Thanks bro 😊
Do cat silencer gives more power compared to stock
No so much but some people says that technically not proven
Good info💓
Thanks bro
I don't know what the problem with my rx100 l've all the things but it's still too slow today i changed the block engine but still it doesn't work. Help me bro. 😭
Check Clutch plates and tune the carb good
Nice bro for info are a automobile student jst asking beyond subject 😉
No Bro I'm From IT
Bro rx 100 rebore ka Kitna kharch hota hi pls respons me
Hi bro I am having a problem my rx135 4speed is in perfect stock condition but the exhaust note of it is less like your rxg what should I do.
Change the muffler
It's now having now having stock muffler can you recommend any muffler for me.
Use alter muffler bro
Thanks a lot bro😊☺️ for answering my question only in a minute really thanks a lot
If the silencer and muffler is full with 2t oil it will sound try to clean the muffler and silencer better sound will come
Bro rx and shogun which is best performence
Both are good
Good Video
Thanks bruh
Good video
Thanks bro 😊
bro what causes low silencer beat in Rx100
Poor compression and silencer leak..and bad tuning ...
@@MotoGod
bro thanks for replying.
i guess my bike is having some trouble in cylinder block. there are lines in my piston. that will cause the problem right bro???
Yes bro 🙂
@@MotoGod Thanks a lot for your reply bro 🗯️
Hello bro, hope you doing well..
I did piston boring because of the piston problem.. After boring Also now I am hearing some interrupting sound and one of the known mechanic was telling that, it is may be because of the connecting rod issue.. Is that true ?
Yes with connecting rod also the sound will come .... And it sound similar like a piston slap sound.
Could you please watsup me so that I will send you my bike sound.. 9629342472
May I know the cost of the connecting rod for Rx100..
Costs apporx 500-700
@@MotoGod Where we can get the Original Part.. If you know then please assist me..
Bro recent ga rx100 konna but same sound e problem ki max entha karchu avthadi bro
For only connecting rod change 3500-4000 ..
..and price depends on the technician
@@MotoGod thank bro
Good videos 👍 🔥
Thanks bro 😊
Brother Yamaha Rx100 original connecting Rod How much price brother?
Costs apporx 600
Shogun needle baring and guggen pin is available
Message me on instagram (_motogod_)
Bro go for suzuki fiero bro
👍🏻👍🏻👍🏻
😊
How are you planning to the rebuild the damaged head mine too has pit mark on it
Bro back then I want to get it done but compression values will change if we do soo and that will effect the performance so I preferred to replace it and replaced bro ☺
@@MotoGod❤️
yes indeed compression does a major role
Thanks for your support and love 😍
@@MotoGod support & love from kerala❤️
Looking up for more informative videos
How to check size of connecting rod
For 1ltr petrole how much 2t oil should be add ????
40 ml if you ride hard
30ml for normal use
@@MotoGod I'll ride in economy level means below 60 speed
Then use 30ml per liter
Hello bro😊
Hi Melwin bro
Bro pistion sound
Have to change it