Hattori Hanzo cutting board #2 / butcher block. Cnc inlay. Wood inlay 4k video.
Vložit
- čas přidán 17. 04. 2020
- How to find inlay parameters.
broinwood.com/products/how-i-...
Feed rate v bit 30ipm amzn.to/3wf9Txg 👍👍👍
Feed rate flat nose 1/8 40ipm amzn.to/3izKXcF 👍👍👍
For orders go to broinwood.com/pages/custom
Check out our Instagram page / broinwood
broinwood.com/
🔥🔥🔥Here some stuff which I use in my workshop and really love it.
Maybe it will be useful for you.🔥🔥🔥
Definitely recommend this Oil and Wax for cutting board:
amzn.to/36ytyi1
amzn.to/3nrAPGL
My glue:
amzn.to/3jyVMNu (really love it)
Double-Sided Duct Tape:👍👍👍
amzn.to/33ANxen (It holds blank well, but anyway, I also use screws.)
My Random Orbit Sanders I love how they work but they get a little dusty:
amzn.to/36u5mxs
amzn.to/3d1oNiv
Makita 3/4-Inch ID/1-OD diameter by 10-Foot Hose
amzn.to/33uGmnS
My Sanding Disc (for me they are the best!!!):
3M Cubitron II
amzn.to/2SrnAHs (80 and 120 grit)
amzn.to/2SqlvvH (150 grit)
amzn.to/3nksyUQ (220 grit)
amzn.to/2GriKaZ (320 grit)
My router bits which I use a lot:
My favorite router bit!!!:
Metric CNC 2D and 3D Carving 6.2 Deg Tapered Angle Ball Nose (clean cut, long life, definitely recommend) 👍👍👍
amzn.to/3wf9Txg
2D & 3D Carving 12.4 Deg Tapered Angle Ball Tip x 1/32 Dia x 1/64
amzn.to/3sviUAl (clean cut, long life, definitely recommend)
Standard Spiral Bit with Down Cut 1/8-Inch Cutting Diameter
amzn.to/3izKXcF
15 Degree v bit (be careful easy to break down)
amzn.to/3izLyLr
Round Nose Bit with 3/8-Inch Radius, 3/4-Inch Cutting Diameter and 1-1/4-Inch Cutting Length
amzn.to/2SsZYlV (I use it for juice groove)
1/2-Inch Dia. 2 Flute Ball Nose Spiral End Mill Router Bit
amzn.to/33v99Zm (I use it for juice groove)
Spiral Flush Trim Bit with Down Cut and 1/2-Inch Cutting Diameter
amzn.to/2SsB8m7
Three Flute with Spiral Bit 1/2-Inch Cutting Diameter and 2-Inch Cutting Length
amzn.to/2HTgwkV (I use it for flatining surface and makining cutting board shape)
Spiral Bit with Up Cut 1/4-Inch Cutting Diameter and 1-Inch Cutting Length
amzn.to/36u2Hns (I use it for cut off inlays. it doesn't make chips.)
My Collet Set:
amzn.to/33xbO4X
My DEWALT Plate Joiner:
amzn.to/33xtkWQ (it is not bad and not good it is ok)
My Bandsaw Blade it is inexpensive and cut well:
amzn.to/34uKNy8
Hi,
My name is Nik. Welcome to my channel!
I appreciate your likes and subscriptions!
Sincerely,
Nik. - Jak na to + styl
It's not even fair how goddamn good these are at this point! I've watched a MINIMUM of 2 hrs of woodwork & machining YT per day for 2.5 years and I have never, ever seen something this impressive. It is unreal...
Same. This is nuts!
You have truly opened my eyes to what can be done with a cnc and some AI files, thank you
cutters and cnc; the Wizard of cnc-cutting, I don't want to think about the files of this work ... beautiful 😍
K
These are just getting better and better. Amazing work, and great video editing, too!
I've enjoyed watching these. I've been doing epoxy inlays for about a year now, I'm in the process of designing my first (complex) wooden inlay. Thanks for sharing all of your work, you're doing a great job inspiring others.
Amazing work as always. I cannot help but be jealous of all the board you make. They are master pieces. Keep up the great work.
I have no need for a butcher block and here I am desperately wanting one. Unbelievable work. Majestic. Great job.
Thank you:)
Simply AWESOME! Could only be done with the mind of a craftsman and a 3D Router.
not only piece of art, but it is also so relaxing to watch these videos
Awesome!! The Detail is just Amazing. I look forward to your videos they are definitely inspiring
What a fantastic demonstration of high quality detailing and C-n-C work. Congratulations on a fabulous work of woodworking art.
You used two different species for the face and helmet?
That's what gave it the contrast.
And that's why you split the inlays into several pieces.
I couldn't tell until the close up at the end.
My God man!
You are the Picasso of CNC!!
Well done sir!
Again!!
Commented too soon before you oiled it. Wow she's a stunner so so good. Got my CNC arriving this week and I have to say this and your other work is very inspiring, thanks for sharing your talent and keep em coming.
I thought the first cutting board was amazing ! but you went above and beyond on the second one 🤯. Another amazing job bro. Thanks for sharing 👊🏼
Absolutely stunning, Beautiful work.
Well, that was 24m51s of my life not wasted, amazing work!!
Thanks!
Would be a crime using your cutting boards as a cutting board, that's a piece of art.
É uma obra de arte!
Que linda!
Absolutely wonderful piece !!!!!!!!
You are the Best !
You sir are a true master of your craft! The best inlay I have ever seen. If you were to make a master class of how something like this is done I would be the first to sign up!
This has to be my favorite cutting board video of all time.!
That is so amazing, would be scared to cut on it in case it chips it. Just love the Japanese theme designs, especially Hattori Hanso. Wish I could afford one. 🏴👍
This board types do not produce chips. If you interested in this board contact me at broinwood@gmail.com
I want one ...
Am I the only one that would hang this as a piece of art in the lounge room?
Top notch work and excellence to details. I need to learn this skill with a CNC. Masterpiece. 💯✔️🔥
Шикарнейшая работа, Ник!🔥🔥🔥
An Artisan, incredible work.
This is amazing! Awesome work!
Outstanding. Pure perfection
That looks absolute AMAZING
A true masterpiece! 👍👌
How to find inlay parameters.
broinwood.com/products/how-i-am-finding-inlay-parameters
Most of my videos are a small report to my clients about their cutting boards and how they were made. I believe that it is very satisfying to watch it. And I really happy when you ask me to make a video because it is a special gift. Also, I want to say "Thank You!" to everyone who watches, liked, and comments on my video. I love your comments and always read them! I just do not have enough time to answer all of them.
Sorry:)
If you don't like the music, please turn off the sound :)
Thank you!
Answers for some frequent question:
The time frame for a board like this is 3 weeks (if I'm not making other boards).
I use a lot of different types of bits from 6 degrees to 90 degrees. (read in description)
In this project, I have used 1/8, 1/2, 1/4 flat nose, and 15-degree v bit.
Feed rate 60 ipm for V bit.
For most projects, I use fusion 360, but also I use Ai, Vectric, Corel Draw, Inkscape, Ps.
For finishing my boards, I use that wax and oil broinwood.com/collections/cutting-boards-care
Why do I use a 1/4 flat nose bit for cutting inlay and surface? Because it does not make small chips.
i dont mean to be off topic but does anyone know of a method to log back into an Instagram account..?
I was stupid lost the password. I love any tips you can offer me
@Kyson Hunter Instablaster ;)
@River Yousef thanks so much for your reply. I found the site through google and im trying it out atm.
Looks like it's gonna take quite some time so I will get back to you later with my results.
@River Yousef It did the trick and I finally got access to my account again. I am so happy!
Thanks so much, you saved my account!
@Kyson Hunter happy to help :)
Outstanding craftmanship!!
Absolutely fantastic!!!
Superb! It's great to see you showing all the skillful handwork done to finish the masterpiece!
Fantastic work! 👍
Amazing woodworking skills - absolutely awesome results
Thank you so much!
Outstanding board, retired chef, I would have enjoy cutting on such of a board, have seen anyone in my area of Kansas making anything great as that
Dude, seriously? Using a cutting board like this to chop onions on? This is a work of art!
Kojak0 hey it would still get used, most of the time it not even yourself
I wish I could like this video more than once!
Excellent work. Your videos show the skill and hard work that goes into cnc woodworking. It’s not just a machine doing all the work.
Thank you!
What you do is amazing keep it up my friend loving it! 😎🤯💯
Naaaashhhh fookin’ way!!! Ridiculously GORGEOUS!
Parabéns.
Seus vídeos sempre top 👏👏👏
Incredible. Period. Wow
A work of art.
*love that work 👍One day i will do that ❤️*
old school sanding i love it people dont get that great job
Simply amazing!
Today was a good day. I found this channel. Great work sir.
Thank you!
That was amazing!
Excellent bit of work
Lindíssimo grande profissional.
Nik this is the second samurai inlaid board that you have done and both are amazing!
I can very easily picture both of them being given as gifts to a Japanese emperor or their family, outstanding items!!!.
Trust me, more samurai boards coming soon
@@Broinwood excellent news 👍
Gorgeous!
masterpiece
My husband started cooking when he retired , he saw this butcher block and now he makes me feel like he cannot live without one 😂
We could be twins... almost. I have some sandpaper and water too. Beautiful work!
Great job! keep it up
I keep coming back for more. Amazing artwork and craftsmanship. Must be expensive AF?
your work is really amazing :)
1:10 in and I noticed that you covered the Jet plaque on the planer head cover but not on the control box, and your Band saw is throwing sparks, locked bearing? I love the content and the videos and it seems you are a consummate wood worker. Amazing stuff sir. I wish I had all those tools here in Thailand and a small shop, I would be a happy camper instead of being bored and watching CZcams!!!
Thanks for sharing and live long and make great cutting boards :)
Edit: and no, I did not read the comments before posting, you are using solid guild blocks? I have never seen "sparkles" ;) come from the interaction of a bandsaw blade and the guide blocks before. Learn something new everyday, if you aren't concerned I should not be at all! :)
Edit 2: Yantra and dragon Tats? I would love to know your story, everyone has an amazing life to tell of!
Blew my mind - very cool!
Always so wonderful ❗👍
Необычно, красиво, у мастера золотые руки.
Broinwood you have put out another quality carve!! LikeOthers have said this one is even better than the last one, what do you run your spindle speed that is at 18,000 RPMs?
Bro this is SO crazy. Good Work!
Thanks!
Masterpiece !
Superb piece of woodworking. It looks like you only press fit the Zank Inlays, and you don't a appear to have any problems with lifting. Is it because you have a tight fit? Thanks for the video. You've got a new subscriber. Good job.
Amazing. Regards from Spain
Great work! I love watching your work!
What Cnc machine are you using? What size spindle?
Amazingly Awesome.
it would involve 1 extra bit change, but you should get a 1" whiteside surfacing bit and run that first :) just a thought.
beautiful job!
Stunning 🤩
Goddamn this project is so cool. What an amazing board. 10/10, you rock dude.
I want one even more than the last one.
Hi Nik wow amazing work. You are a true master. I'm from the uk. We don't have much choice in wood over here 😥 I'm thinking of getting a cnc machine. Could you recommend one for me please as there are lots of cheap not so good ones out there? Any info would be much appreciated thank you and again amazing work cheers
John r
Amazing job 👍😀🍻
easiest sub of my life
Отличная работа! Хорошая мотивация к освоению таких технологий
your vision is commendable, sir … as is your attention to detail. thinking, to myself, you probably chose to not combine softwood and hardwood … since each expands to a different amount … thereby, inhibiting splits. thanks for sharing, *_broinwood_* … best wishes.
Hardwood only
Nice work Nik .i cant wait for No3/ No4 /your work is amazing😎😎😎
Excellent skill and fine work.
You're work is absolutely stunning, a pleasure to watch thank you.
Просто произведения искусства!!!
A masterpiece👏🏻👏🏻👏🏻
Love your vids. What's your inlay depth and starting depth? Do you leave much for a gap at all? I looks like the V inlay method for most of it. It would be very nice to understand some of your settings. Thanks for making such cool videos.
¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡A-WE-SO-ME!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Magnificent work my congratulations
superb!
how about oriental koi with majestic fins and japanese style sea wave around?
incredible.... this has to be a $10,000 cutting board though.
I was going to say $1200 I went to check their website but all their cuttingboards are sold out.
I would love to see a chess board made by you.
very beautiful..great job.
Goddamn this is beautiful!! You're amazingly skilled and something I'm looking forward to learning, gonna start with getting a cnc machine first 😅
It's a great board I cant understand why people say they would never put a knife on it that's such a shame buy it for what it is and put your knife on it I would and be proud to as well
I would love to see the Viking edition!
EPIC. Modern technology, imagination and skill in perfect harmony. Top class bro love it!! Axiom ambassador or what?
ಸಬಪ
amazing
good job
Да очередная реликвия. Пришлось у Вики спросить. Оказывается знаменитый полководец. Удачи вам!!!
Amazing!
Exceptional!!!!!!!!!!!!!
Woow vraiment un très beau travail je voulais savoir quelle sorte de v-bit utilise tu merci