AKK Race Ranger VTX Smart Audio INAV
Vložit
- čas přidán 29. 08. 2024
- AKK Race Ranger 1600mW VTX with Smart Audio. How to setup smart audio with iNav.
AKK Race Ranger 1600mW VTX - bit.ly/2roI7Cg
Subscribe & Ding the 🔔
bit.ly/ANsubscribe
🎥 Video Recording Gear 🎤
In the Field
► Onboard camera Mobius C2 - bit.ly/2RLNLLg
► Hatcam Firefly 8S 90º with external mic - bit.ly/2DwAP2V
► External Microphone - bit.ly/30SwvDB
In the Workshop
► Wide workbench cam - GoPro HERO7 Black and Firefly 8S 170º - bit.ly/FF8S170
► Close up workbench cam - Panasonic Lumix LX10 1080 60fps
► Audio recording - Rode smartLav+ mic in Samsung A8 - bit.ly/2ZK6GGy
► Video Editing in Final Cut Pro X on 27" iMac
► All the Action cameras I have reviewed - newtonairlines....
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAi...
► Newton Airlines blog - newtonairlines....
► Andrew Newton CZcams - / andrewnewtonaustralia
► My portal - anewton.net
► What HD cameras do I use - newtonairlines....
► What FPV cameras do I use - newtonairlines....
► What FPV gear do I use - newtonairlines...
► Depron Armin Wing build - • Depron wing build
►Favourite iNav gear
Matek F405 Wing FCB - bit.ly/2SI3bAv
iNav GPS - bit.ly/2ERre6w
Beitian BN-880 GPS - bit.ly/2K7hdHc
👌🏽Affiliate links 👌🏽
I’m not a fan of the Patreon concept, but you can support this channel by using these links
► BANGGOOD RC - bit.ly/2R7LMgg
► BANGGOOD Website - bit.ly/2OYahv4
If you use these links to make a purchase I may receive a commission, which helps to fund this channel, at no extra cost to you.
👀 Use your common sense, watch other reviews and shop around before making any purchase.
#AndrewNewton #akkraceranger #smartaudio
Every time I need to find out info on how to do things I can always count on your channel . Thanks again
Glad to hear it!
Finally some one put the heat sink on the correct side of the board! People always put them on the EMI shiled SMH.
Thank you very much.
I got one of these without a manual.
You saved my bacon.
Mmmm, bacon
I have the 2000mW dominator. Its beastly. Use the switchable power output on the Matek wing controllers to have an on/off switch so you can wait until you've got some airflow moving over it before powering up :) Or use the adjustment tabs to have adjustable power output assigned to a switch.
From memory there is a way to configure smart audio to show accurate power outputs. As far as the flight controller is concerned, it's just power levels 1 through 4.
Good tips thanks. I'll have to look for the OSD VTx power level calibration
Great video Andrew!!! What a really powerful Tx!!! Thanks for sharing!!! Thanks for sharing the Black Friday sales also.
I've got one of these but haven't used it yet so thanks for the set up info!
MAD!
Got one of these for 35 or 46AUD the other week with some motors a Tricopter thats slowly forming on my wall....
Looked around at the time but ni review that I could find....
Figured AKK were a known quantity so should do the job even if it doesn't get run at full strength...
Haven't watched yet, just wanted to say thanks- especially as it'll be a while before mine gets used! :v
Bummer- Somehow I thought the 5v output more than 500ma...
Great review on the AKK!
when you want to microwave medium size burguers from the air :D
Ha, you might be right.
Very nice young man
Awesome. Thanks
Thanks Andrew!
great friend thanks for sharing your information. greetings from Mexico. Have a nice day
Thank you! You too!
Why do AKK supply their plugs with such damn short leads?? For the sake another 10cm and $0.05 cents worth of wire - it sure would make life a whole lot easier.
Why can't I see anything in theosd? The signal arrives and even on the radio the vtx is read but nothing in the goggles
I have the US version. Limited to 100mW...is it possible to unlock the power of the International version of is it a totally different construction?
First rule about fight club.
Can you please provide me the link of video to how to program (matek f405/f722) flight controller. I buyed it but don't know how to program it.
This is the best place to start inavfixedwinggroup.com or look at my INAV playlist
Unfortunately, it is not a product worth buying. It creates a lot of noise in the image and this is not due to motors or esc noise. Additionally, it does not lock itself to the frequency you set, so sometimes the image may become black and white. I recommend tbs unify pro32 hv.
Thanks for your update
Thx, really nice and well structured list this time, but most of the planes won't be shipped from the US to europe I guess. Don't know what gwtr warehouse means.
It's like the secondary China warehouse
Hey could I get some more details on how you hooked up the camera and vtx to the battery with out the FC
I make up a Y Lead to get power for the VTx and camera from the Lipo balance plug like in this video czcams.com/video/46y8fhmvCyQ/video.html
Hi
I want to use my Webcam to be my FPV camera
It has same 4 Wire
Red-White-Green-Black
Can I directly connect it to the AKK Race Ranger?
Should I rearrange the wire order?
It's possible but don't trust the wire colours. You would need to have a wiring diagram for the camera cable to make sure
@@AndrewNewton hi eventually the wire are 5V GND DM and DP
Did you know where should I conmect the DM and DP wire?
I saw in the Video we only have to connect 1 Video Cable to the VTX
oiya My VTX is AKK RACE RANGER
5V and G are OK but the others are probably Data+ and Data- You will have to experiment to see which one is Video signal.
Hi Andrew!! My Akk Race Ranger dont show The battery Voltage. How did you manage to do that? I dont use a flight controller.
Some cameras provide battery voltage on screen
are you going to be doing a range test? i recently ordered a 1600mw unit by a different manufacturer and interested to see how they perform range wise :)
It wouldn't be wise to show long range tests on my channel.
@@AndrewNewton sure it would be! would be happy to see it:)
If its cause of not wanting to fly out of los you could just have a friend with a 5.8 reciever do the range test while u fly los
THXS! Good video! Whats better: AKK 1600 mW or 2000 mW?
I have not seen the 2000 but better antennas is more important than more power
Andrew Newton Thxs!
How did you get the voltage on the screen?
That's a feature of the camera.
Am I able to just buy that cable anywhere? Instead of having to buy seperately and solder? Im new to this and dnt even know the name of wires I need to purchase?
No you will have to solder up your own leads to suit your own equipment
@@AndrewNewtonThis is the set up I choose. Can you check em and then tell me the name of wires/cables/leads that I need? I have solder gun and can solder on my own, I just dnt know where to start with the cables I need. All my stuff will be arriving today ans tomorrow.
(VTX: 5.8GHz FPV VTX a.co/d/gi2989S
FPV camera: FPV Camera Foxeer Razer Mini a.co/d/13mJ1Xn
FPV Receiver: FPV Receiver 5.8G 150CH OTG a.co/d/0VzMbEH)
I usually power the VTx from the battery balance plug or from a flight control board. What is it for, plane, quad, car? Here's how I connect czcams.com/video/46y8fhmvCyQ/video.html
@@AndrewNewton Wont have a flight controller. Just for some fpv fun installed on rc car.
Can I power the VTX from a 3s battery main cable then power the fpv camera from the VTX. One power source. This way all I need is the cables that comes ×
with camera and VTX, correct?
@@FullPayGaming Correct. The red plug on the VTx is a 2 pin JST, connect your battery to that. Solder 5v out from the VTx to the camera Vin or + (red). Solder the ground wires together (Black). Solder the Video out from the camera to the Video In on the VTx (usually yellow or white)
did someone got the mic working on this vtx?
Can't set 1600mw on betaflight, help me!
No idea about Betaflight sorry
What is the max. power in your country.?
Wrong vtx table ? Otherwise very informative!
inav doesnt support vtx table
أحلى لايك👍🏿💐
Mine gets very hot. Is this normal?
Yes normal, all VTx get very hot.
Analog is trash sorry I’m hooking this up to DJI