DX7 Part 1 Manual Cleaning

[@derekpeterjones8560]

Can we reverse suck cleaning fluid through the head? Using a print head doctor on low psi?
Is a 50ml syringe to big to use to push fluid through head?

[@hand5man658]

You can reverse suck cleaning liquid from the head but you need to be careful with the amount of liquid not to deep the head and touch the electronics with fluids will damage the head. You cannot push with 50ml syringe will damage the head

[@AtmLesphotos]

Hello, what flushing liquid do you used ?
Thanks

[@hand5man658]

It was eco-solvent ink so eco-solvent cleaning liquid , it depents what ink you are using what cleaner you will use

[@Halima-pm4oo]

Thnks for your videos but before i start cleaning my head shoukd i put it in the solution

[@hand5man658]

Hello @Halima, No socking printhead into cleaning liquid can damage your printhead.

[@shawnclifton4777]

Hi
What syringe and tubing size did you use ? I have a 4mm ID, will this work ?

[@hand5man658]

Hello 4mm ID is very small i think i use 20ml syringe without o-rings

[@shawnclifton4777]

@@hand5man658 thank you. Do you know what size I would need in mm ? I don't want to take it apart and have the wrong size tube :p. Thank you

[@hand5man658]

@@shawnclifton4777 I missunderstand before i thought syringe is 4mm internally , your tube size will be 2-3 mm ID AND 5-6 OD

[@shawnclifton4777]

@@hand5man658 amazing, thank you . I have a 3mm tube coming so hopefully that will be all ok :).

[@hand5man658]

@@shawnclifton4777 Great, If you need more assistance please let me know