Roland VS printer p/h replacement

[@dnaaz6]

Hi Steven am to change my head my vs 540 thanks to your tutorial is really good.
I have a couple of questions, changing the head the only parameter to be replaced in the series machine is no more head or calibrations within the system so that the equipment is functioning properly, again thanks for the video

[@eternalgaming9177]

Thank you Steven!

[@emadfarouk8947]

Hello STEVEN . I have an XF 640 Roland. I'm having trouble printing. Print test, print, blue head. There are only blue streaks, and the color is scattered outside the print area. Can anyone please suggest anything?

[@Conocimientoysab]

friend what do I do to recognize the heads I put new ones but they don't paint the heads

[@nsserigraphieltd6399]

Please help me find a link to DAMPER replacement on versacamm VS series

[@myname2263]

That would be nice ! I've been looking ALL DAY ! I replaced mine but now I have zero ink coming from the brand new head .

[@izackjoseph5894]

Hi Steven, I have a printer head but the last number/letters of the head rank are not visible
need help

[@rudydeep22]

i need to change my print head can i change the ink configuration from CMYKCMYK to the 7 color configuration of
CMYKLcLm & Double White at the time when i install the new head?

[@nhuminh]

I hear from Roland staff said, it is have to replace mainboard to change inktype from CMYK to use metallic ink.
But you could try: go to Service mod>Service Menu>Sub Menu>Change Ink Type> from MAX 4 change to MAX WMT

[@rudydeep22]

ok thank you

[@spubdesigh]

Hi steve i have problem with my printer vs640 i no color black and magenta can you help me ???

[@ricardocarlossantaana9251]

Could you explain to me how to remove the head because it does not come off and in the video it is not appreciated well.
Is there any way to contact you.
Thank you

[@glenfordgamelo8451]

How to close the choke valve?
I have VS-640i. Thank you!

[@nickvanhuisduinen8157]

Hi can you help me find a video on how to replace the printhead on the versa-art rs540

[@lhezcapz3710]

if you want to reset the head shot counts you need to get inside the system via service mode and getting inside you need to have the password and pw is limited only for engineers and technicians

[@elainnysferrer4333]

Hi my machine no sent the magenta color what I can do?

[@lucindazhu9904]

Thanks for your video that help us a lots, but after replace the Printhead we’ve found there are 2 rubber rings come out from somewhere and we can’t find out where supposed to be, and we powerful clean it after replacing the Printhead and not able to print at all, so we doubt those 2 rubber rings probably are important parts, but we can’t figure out where they are, please help, thanks

[@nhuminh]

Could you show me the image of that ring?

[@ladyandarker]

Hi, I have a versacamm vs540, and it's making a weird thing, when I command it to print, it just move the carriage like it's printing but doesn't print, even when I sent to a print test. The head print is OK cause I can clean it and I can see ink come out. What could it be the problem?

[@Gurudeconocimiento]

Hi Adriana, I have the same problem, I was wondering if you already found out the solution to our problem in another way and might help me out giving me the solution, I would appreciated a lot.

[@powerwellpowerwell7194]

Hi Steven;-) Just wondering if I can follow your video to replace VS640 print head? Thanks

[@nhuminh]

Yes you can, the printer in this video is VS-640

[@powerwellpowerwell7194]

+Steven Pham Awesome! BTW, have you any recommendation to buy VS640 Printer head online? Do you have link? Thanks

[@deborachaves2466]

Olá! Por favor, quais os comandos para troca de cabeça Roland Vs640??

[@manuelpimentel9112]

Hi Steven you still repairing Rolands ??

[@luigiturco9535]

hello I did everything you showed us by changing the code of the new head but it doesn't print practically anything. What may have happened? Thanks

[@nhuminh]

The code is not important. If the ink not came out the problem is: maybe the choke valve still closed, damper, or pump motor

[@luigiturco9535]

@@nhuminh
I saw the 2 fuses of the motherboard that blew those from 3.15a on Friday they arrive and I see the rest everything works Thanks for the reply

[@sunset8657]

Hey! I bought a new print head for my roland re 640, I need help on how to installed please ... thank you!

[@nhuminh]

The same with vs-640. If you not replace dampers no need to close the choke valve. If replace printhead and dampers you have to close the choke valve

[@glenfordgamelo8451]

Sir, where is choke valve located? I want to check the damper and print head because the cleaning solution is leaking and 5 out of 7 colors are not printing, only the magenta and black does. The other colors do not print. I have VS-640i. Thank you.

[@kamaainatinting]

Hey brother im planning to replace head and damper. do you have any tips?

[@nhuminh]

Remember close the choke valve before remove the ink tube and damper

[@gregggaudet7227]

Hi,
I change my printhead, and dampers on VS-540i, I went in service mode for change code of printhead, but now when I want to print, there is no color the roland print but no ink....
Do you have an idea ?
Thanks

[@nhuminh]

Did you do a powerfull clean after changed printhead?
Remember check the ink choke valve

[@gregggaudet7227]

Thanks for your quick answer, I do 3 or 4 powerfull clean, for the choke valve I think it is open ...

[@gregggaudet7227]

if it's help someone, I do "pump up" on service menu and now I have color, all is ok ... thanks

[@josecanseco4296]

tengo un Plotter Roland SP-540V pero ya no quiere encender un día antes estuvo trabajando bien y hoy ya no prendió
.

[@gigantemaipu1376]

XD

[@keithfaske4843]

What code did you use to get into service mode? I too would like to know where to buy heads. TIA

[@nhuminh]

power on main power switch, then press down, right, left, up, right, down, left. Then hold 3 button: left, down, right and press sub power button. You will getin Service mode

[@3ATPAXEP]

some of nozzles clodged. Is it forever or there some magic liquid that could clean it? I use BS3 ink.

[@nhuminh]

+3ATPAXEP
You can try to use cleaning liquid to unclodged the printhead, use a syringe to inject cleaning liquid

[@3ATPAXEP]

I tried clean head using syringe last time and something broke inside. so now yellow and cyan separating inside)))

[@3ATPAXEP]

oh mixing

[@MYsidECreWcustoms]

Hi, i just have a question, what printhead does the vs540 use?? Dx6 or the dx7?? Please help

[@nhuminh]

VS-560 use DX6 print head. DX7 only China ecosolvent printer used

[@ingsupport7078]

dx6

[@DEBINHAblz12]

what commands do you run in the middle of the video after turning off the machine? The video is cutting your hands and I can not see right.

[@nhuminh]

deborinha VIEIRA CHAVES That is combine key to get in to Service Mode of the printer

[@DEBINHAblz12]

@@nhuminh After changing the head, you execute some commands with the machine off. Which ones are they? What is the sequence of the keys you press?

[@nhuminh]

deborinha VIEIRA CHAVES turn the sub power off and then press
down right left up right down left
then press and hold left down right (at the same time) and press the sub power and release

[@DEBINHAblz12]

@@nhuminh ok! Thank you!

[@jorgewallauer3969]

I could have moved the camera away to see the key press sequence ....

[@lhezcapz3710]

it doesnt make any difference even if you dont change the head rank but you need to reset the head shot count to zero

[@araujos3daraujo700]

i try to input new head rank number but it won go thru

[@3ATPAXEP]

I didn't changed head rank when i placed new printhead. what this for? i lost parcel of course.

[@nhuminh]

You have to change head rank to make print head eject ink correctly. Head rank printed on small sticker on the side of print head

[@3ATPAXEP]

Steven Pham
ok i'll try.
By the way. do you know why after cleaning head become owful? i have to make 3 powercleaning to turn it well. I tried to turn aftercleaning off but it's impossible. I think it's firware issue.
So a lot of ink wasted due to that.

[@nhuminh]

First, when doing powerful clean, you should look at ink waste and see does ink waste come out?
- If not that mean the print head cap it not tight and no pressure to suck ink out. You should clean the print head surface and cap
- If yes, you should wait 5 minute before do print check (some time do many powerful clean, the pressure in ink cartridge make ink come back from printhead to damper)

[@3ATPAXEP]

Steven Pham
yes. of course ink come out a lot. latly I replased cap now I'll try to replase inkpump. I don't know maybe even new printer clogging after small cleaning.

[@nhuminh]

+3ATPAXEP is your printer VS640?

[@suelencosta7675]

Who can help me?
Printer : VERSACAMM VC 540i
I am using CMYKLcLmLk color mode and now I would like to convert to CMYK.
How do you reset the machine ? or what do I need to do.
please help

[@guerrilladrone2702]

Did you even find a way to do this? I want to do the same to mine... thanks.

[@micheledawson1474]

We can’t see around your hand

[@tosintoel6268]

Susah bangeut tuh bukanya ....

[@burleycolejr460]

Hello Steve!

[@nhuminh]

Hello

[@mattferg4u]

Can someone tell me the best source to purchase a replacement print head?

[@nhuminh]

+mattferg4u
How many pcs you want to buy?

[@tarakmakwana]

I want to Replace my vs-640 head please let me know which one should i get and from where

[@ingsupport7078]

DigiPrint Supplies

[@kttbh1177]

hello Steven

[@nhuminh]

Hello