Rebuilding a 900HP 3 Rotor RX-7 with Used Parts. Nothing blurred out!
Vložit
- čas přidán 4. 04. 2020
- T-Shirts: www.dahmracing.com/collection...
Patreon for Build Videos: bit.ly/2koiw8G
Instagram: bit.ly/RobDahmIG
Subscribe to Rob Dahm: bit.ly/1OAN9yi
AWD 4 Rotor Video Series: bit.ly/2QiFduE - Auta a dopravní prostředky
If this was released in Japan everything would be blurred out
Especially my tentacle
@@RobDahm it's spelled testicle
isaac shively /wooosh
@@RobDahm tiny testicles
literary
Yyyyeah, we're gonna need you to start uploading more during these dire times.
maybe he could make a Dahm Bonus channel with short 5 min vids for the other little things that are happening around the workshop hey :)
42 minutes of Daddy Dahm bringing back to life the all mighty 3 rotor? Sing me up for that! 😁
1 ROTOR TINY TURBO SMART CAR DO IIIIIT
Peter Schwankl agreed!! 💯😁😁
👌
Can 3 rotor parts function as one rotor? I think it might be missing some components vis-a-vis balance and all that.
aserta team boostes have been working on a single rotor speedster for a bit
Faster proms is making a turbo k24 smart car check it out!
Rob: uploads
Me: ah yes the Dorito gods have provided some good pθrn.
I see what you did there with the Greek letter..
@LUCAS KELLY yes.
Imagine what robs local cashier thinks when he walks in every two days and buys a new box of vasoline
Gotta kill time during quarantine somehow.
Vasoline makes a very poor personal lube...it is white grease! There are much better products in 2020, for sure.
No one:
Rob Dahm: Look at my pp.
11:35 😂
15:58
“Uh yeah it’s this part”
(violently rips apart oil pan) 41:47
I’m guessing the Red/purple lube you’re putting on the shaft during assembly is Grape Jelly?
This is all so foreign to me, I’m lost..... but I can’t stop watching! I’m fascinated by the rotary motor! Amazing knowledge and dedication. Inspiring to say the least. Mad props and kudos to you all!
6:48 that side seal spring is installed upside down.
If it is I would email scream or do whatever to let them know.
Yep you’re right wrong way
If it is installed upside down would the pressure from the spring not be the same? How can you tell?
If he’s done so many of them has he been doing it wrong all along I wonder?
you can install the side spring seal in any way. People install it with the tips pointing up only because it may provide support on the end of the seals, but I have installed it both ways and found no problems. The oil ring spring and the apex spring are the only two springs that must be installed correctly
Only Rob Dahm can make people watch a 45 minutes long video without music, meme-cuts or 10000$ camera equipment. It's almost like a collective therapy session... ^_^
Watching endless 20 part building episodes have lead me to this. This is the content I signed up for.
40+ min of footage, no ads... what a good guy 👏🏻
1 nasty STi that just means he has a low cpm lol.
Awesome video, so great how we can have a detailed view of how everything goes together with pretty much every step along the way! A great learning tool! Thanks Rob!
Watched whole thing I now know the secrets of how to put together rotaries
#Vaseline #whoknew
yeh but people who are thinking about giving it a go still need to have a good amount of engine building knowledge & experience, clearances etc are very important in a rotary engine, all the details matter you can't just throw it together & think it's going to work properly or at all, if you don't really know what you're doing there's a good chance that you will end up with a junk engine & rotaries are now far too rare to be mucking around with, though people who do know what they are doing & are willing to take their time with the build then in that case all good but please rookies these engines are too hard to find these days to ruin hey :)
@@scottjinx yep and the right tools
@@scottjinx Especially 20B parts!
That's a lie. No one knows how rotaries go together. There magical
Whaaaaaaat!
Isiah has a 3 rotor to build tooooo????!!! 👀👀👀👀
Rob's brain just disconnected on 34:18
*PRO TIP! Mount a can or some sort of container to your engine stand. Keep a set of bolts for every type of engine you work on in there and it also gives you a place to put the pin when out of use. 👍
Always good to see a Damh drop!
Just rewatched your old 3rotor videos, I can't wait to hear this beast again!!
Gotta throw up a like before the vid even starts cuz it's always 🔥🔥
I have been going through alot of family issues and ever since I met you, I don't feel like in watching a CZcams videos I feel like I'm finally hanging out with my friend. Thank you so much.
Also 29:47 your welcome 😍😜
You should try knolling before starting an engine rebuild. That way, you'll never forget parts. Before i learnt of this, i'd forget on average 2 3 parts, never once since i started that process. It's neat and somewhat therapeutic too.
I had to look this up. Knolling is basically a fancy way of saying lay out all the parts in order
Rob Dahm you are doing what I dreamt I could. Keep up the amazing work!
That heavy breathing around the 7:00 mark got me dead😂😂
Don’t loosen bolts with a torque wrench oh god rob please
I'm going to be pulling my 2 rotor out starting tomorrow, as I'm planning on painting my FD this summer. There's also wiring issues, the oil pan leaks... Looking forward to it!
Man you grew so much! Watching you 2 years ago grow from 50K to nearly 1 million!
Note on the sanding. That metal table surface is not very flat. A cheap flat surface is a thick piece of glass. Another tool you should have is a 4" diameter grinding stone. It looks a lot like a hockey puck, one side is coarse one is fine. MSCdirect pn# 05108402 is a good example of what I am talking about.
Make sure your camshaft is degreed properly!
Drill and tap a tiny hole in that bolt. Then u can put scothbrite in it and use a set screw to hole it. Makes a nice home made hole polisher. Make a new one for work every so often.
love the longer videos and the 3 rotor is always a plus
That's some good engine building pen!
Thanks guys 🤘
Highlight of my day, my motivation for my project car
Dope video. Ton of knowledge.
Ohh my day is made when Rob uploads. 🙂
Ahaha i knew rob was gonna be reusing parts but this is extra ghetto, very 3-rotor style i like it
love seeing rotary engine builds! Thank you
Great vid Rob 👌🏾
When you an Australian awake at 2 am and just before you go to sleep you decide to check youtube and see Rob Dahm uploaded. Fuck
feature lenght build video? i'll nominate this for an oscar for best picture then
Can’t wait to see it running again 👍
robert dahm, this is a 45 minute video. I'm gonna watch it all. Thanks for your hard work
A Dahm upload to lighten my day 👍👍
11:19 the camera just down there! 🥶😂
Honestly I have learned so much about rotaries just from your videos. I can confidently speak better about them to anyone.
Very satisfying to watch with my morning coffee !
What an amazing process and plaform ✊
Great vid. thanks. regards from lock down South Africa
I'm amazed as to the amount of tiny bits in each rotor!
Rob Dahm: I'm going to build a one rotor some day.
@TeamBoosted: I got you dawg
Are you sure? They're not having much luck
@@golfy808 yeh, many people including myself are wondering how a well built single rotor engine will go & sound like, Vargas brothers need to build a semi pp single rotor with a scalloped & lightened rotor so we can finally see & hear the mysterious & all mighty 1 dorito do it's thing hey :)
@@scottjinx Yup,, definitely!! Get it built properly and unleash the beast!!
You make it look so easy Rob
Awesome video! Now I can rebuild my own 20B rotary engine. 😅🤣
That's going to be a great video for years to come nobody else takes the time to explain it while they're doing it can makes it look like One Big Mess
Yeasss love these longer vlogs
Watching someone build a rotary engine is really enjoyable! It's nothing like watching someone build a V8.
The Apex Seal Man, best superhero ever
I just love the way you end your vids😂😂
12:46 man at this time my heart stoped and I thought "how on earth is he holding the torch?"
Killen it with the outro's as usual .
when i used to rebuild 12a engines the water jacket seals went into the rotor housings{the aluminum ones}.
Man this T-Rex knows how to build rotors 🤪
😍😍😍 42 minutes of mr dahm. Only issue is that I don't have any toilet paper.
Rob: look at me.. two hands that work and move freely because im holding the camera with my head
Rob got a mini mullet action going on lol 0:55
I might be in the minority however I really enjoy these longer videos of building the engine or your other long video where you got the whole car ready for sema. I understand alot of people wanna see big horsepower and to be fair so do I but the engineering/assembly aspect is really interesting and I hope you do more of them.
Rotor rebuild is a full time job, it never ends! :))))
I swear, the guy working on your rotors with you looks just like this guy from an old 1320 video from florida with a k20 swapped mr2, while they're talking about the setup on the car
Rob is the man
I'd even watch Rob eat a bag of Doritos and it would make more hp than my V12 swapped Miata🤣
That V12 Miata Bruh my bruuuu
I’m not clicking on your channel🙄
Bailey Rodgers click on his Chanel
Shameless plug
@@rodgersb1248okay no one asked you to click on anything 🤣
Hello from Sweden!
Holy shit 42 mins daddy Dahm does it again
This whole episode GAVE me end play :)
12:47 Rob's new meaning to "fire crotch."
Compression sounds good
I'm really nervous about reusing that damaged rotor. And you should be able to get that spare rotor lightened to within one gram of the others. While you're at it, you should really get all of them lightened, will help the motor rev faster and higher.
I always enjoy the pov videos. Don't know why but I do
Who’s ever breathing like Dark Varder gives the video a real star wars feel
28 minutes of pure nose 👃🏾 whistling
Side steel springs are upside down will end up underneath the corner seals
Itd be sweet if you made a 1 rotor mini go cart replicating the 4 rotor.
Rob got me stressing out with that rare 20b crank on the edge of that messy plastic table lol
When you spun the rotary at the end it sounded like a cool beat for a hip-hop track...
Man, 40 min movie? It feels like christmas !
43 min video😍😍😍😍😍
You need to get a tattoo of all the bolt torque specs on your left forearm, LOL!
More superb 3 rotor coverage just what is needed, the big question is will Rob sort out his rats nest of wiring in the 3 rotor and are the spiders all dead.
Mazda worker: how many bolts for oilpan?
Mazda engineer: Yes.
5:20 rob with the 2 finger action that makes the ladies love him
Not recommended to loosen bolts with your torque wrench. Great video!
This is theraputic to watch
Did anyone else get unsubscribed I just noticed rn I kno been subscribed for over two years
I was wondering why you weren't keeping very precise track of the parts in the other vid, didn't realize you have a magic guru on hand to put it back together. Sounds useful ;p
42mins, bless your soul.
The anxiety i felt when he was swinging that hammer right above that beautiful DSLR camera 😬😬😬😬😬
Wish I could self isolate with these sexy cars
What a sexy sight seeing a 20b getting assembled. ❤️😍
Rob please get a full set of Nordlock washers for next time you are assembling something subject to extreme vibrations. Those spring type lock washers do absolutely nothing.
Found you from 20$ radio hahahah mine Lil Honda got some boom
You need to get your self a vapor blaster would be perfect for cleaning those parts.