Fixing Every Common Problem with Toyota's Last V8 Engine
Vložit
- čas přidán 14. 05. 2024
- A Toyota specialist fixes every common problem with Toyota's Last V8 Engine the 3UR-FE.
Today we work on a 2016 Toyota Tundra to fix every common problem with it. The ticking timing chain caused by a faulty timing chain tensioner. A Front TIming cover leak, Leaking cam towers and valley plate coolant leak.
TCCN Automotive Inc.
Toyota and Lexus Specialist Repair
Visit www.tccnautomotive.com to schedule your appointment today.
Check out the second channel :
/ @thecarcarenutreviews
Recommended Tools:
Basic Scan Tool amzn.to/3Jm6aom
Very good DIY Scan Tool amzn.to/3zF7dvH
Advanced Scan tool amzn.to/3q3L3QQ
Spill Free Coolant Replacement Funnel amzn.to/3uJfKxm
Sun roof drain cleaning tool amzn.to/3GMDlQ9
Good DIY Torque Wrench 1/2" amzn.to/3gE9bnw
Wireless Apple CarPlay for Toyota\Lexus amzn.to/3uKElSo
Very Good Triple Camera Borescope amzn.to/3MrgFs0
*as an Amazon associate, I earn from qualifying purchases.
Follow the channel on Social Media :
/ thecarcarenut
/ thecarcarenut
Check out the channel Merch store
/ @thecarcarenut
Make a one time donation to the channel:
www.paypal.me/CCNdonate
Check out the amazon store:
www.amazon.com/shop/thecarcarenut
*as an Amazon associate, I earn from qualifying purchases.
#tccnautomotive #thecarcarenut #toyota #toyotatundra #toyotaengine
0:00 Intro
0:36 The Plan
1:38 Engine Tear Down
6:44 First Common Coolant Leak
16:05 Ticking Timing Chain Tensioner
20:52 Cam Tower Removal
24:50 All Common Problems Explained
36:57 Reassembly
57:07 First Start - Auta a dopravní prostředky
I am the owner of this truck. At time of repair it had 118k miles on it.
First of all, I'm incredibly grateful to have such a trustworthy and talented technician essentially in my backyard in AMD. He is 100% as friendly and knowledgeable over the phone and in person as he is in the videos. His pricing on the job was more than fair and being able to accommodate me and handle it while I was out of town made it even more budget and schedule friendly. Truck runs like a top and I feel very secure taking it to 250k and beyond.
I'm DIY maintenance guy to a certain point. Biggest jobs I've tackled on my own were a timing belt, water pump and motor mount on my wife's 2014 pilot and probably a rear differential replacement in the 2010 Tacoma I owned prior to buying this truck. Never in my wildest dreams would I try to attack this job in my garage.
Description of the issue:
A loud, intermittent rattle heard from the front driver's side of the engine near the top, which occurred on cold starts after the truck comes down out of a high idle. Typically this started at the 3 minute mark on the trip clock and went away around the 7 minute mark.
This timing chain tick first started around 50,000 miles (don't have exact). The truck was still under powertrain warranty. I took it to my closest dealer and gave them the exact description I've written above. Would you believe it? They called me back the day after I dropped it off and didn't hear anything. So off I go to the dealer to show them. Start the truck, wait the 3 minutes and there it is. I'm assuming they started it, didn't hear anything and called it good instead of waiting the 3 minutes as described. Back and forth with this dealership for a while with no answer. Eventually - 3rd drop off I think - they decide to get some regional tech out to look at it. Service manager follows up with me says they can't do anything about the issue because I have an aftermarket oil filter. Never actually told me what the problem was and how they came to the conclusion that the oil filter caused the issue.
Here's where I went wrong. Early on in owning the truck I read on a forum that it might be a good idea to swap the plastic oil filter housing for an aluminum one, which I did. This seems to be where Toyota had cause to deny any repairs under warranty. So consider yourselves advised, and I believe AMD has a great video on the subject.
The coolant leak was noticed about 6 months ago and the came towers were done proactively since he was already so deep in there.
Oil changes on this vehicle were done every 5000 miles +/- a few hundred. Initially I was using Mobil1 0w-20 and then moved to Rotella and for the last 30k Castrol Edge High Mileage with either a Toyota or Mobil1 filter. I'm pretty impressed with how clean the engine is inside.
I did try to solve this sticky tensioner issue with a Liqui-moly proline Engine Flush. It didn't change a thing.
$5200 is a lot of money, but it's way less than the ~$50,000 it would cost to trade it in for a new Tundra with it's own set of issues. Maybe not everyone's jam, but I'm taking pride in keeping this truck as long as I can.
about two weeks worth. Maybe 750 miles?@@some-random-bloke
Thanks for answering my questions, I have a 2017 with 40,000 miles, I expect it will be my last truck, I hope I can get 20 years out of it. I put most miles on my RAV4.
I don't blame you for taking pride in your Tundra. Maintenance is the key to longevity, especially when your goal is long-term ownership.
I have an 07 Avalon that has the 2GR-FE that Amd spoke of.
I didn't start out to buy the Avalon, I was actually going to look at a couple of used Lexus cars, a LS-430, and a RX-350. I'm glad I saw the Toyota, I absolutely love my Avalon, the best car I have ever owned. Her name is Blue. Guess what color she is.😊 she's become a part of the family. I never intended to own her this long. Originally, she was to just be a daily driver for work. After a few years of absolutely reliable service, I decided I'm close to retirement, I'm going to make her my last car. I'm a stickler for maintenance, I only go 3k miles between oil changes. I retired in 2020. She currently has just over 93,000 miles. Barely broke in. When the day comes that I give up driving, I'll pass her down to someone in the family.
5200 isn’t bad, this is a sh!t ton of work.
Thanks for sharing the back story.
I’m a master tech for a “high end” company with 45 years experience. There are not many techs I would trust to repair my vehicles. You sir are one of the best I’ve seen. I’m writing this as you know technicians never get the recognition they deserve. Love your channel.
So what makes his work so good? What part?
@@ChumpyChicken2 Watch this video and the others he's made and you'll get the idea
The part where he removes the "ychicken2" from your name, using the latest Toyota puller.@@ChumpyChicken2
45 years in the field? Perfect example of why no one should be an auto mechanic, strongly underpaid and you'll never get a pension. Save money for retirement? Can't because you're spending $80k on tools and the list never stops growing
@@COBRO98 Speak for yourself. If you have no motivation or drive and want to keep working at shitty chain shops, then sure. A bit of motivation goes a long way in this field.
About 10 minutes in, my low back started hurting. As a 'Toyota only' guy, I LOVE this channel.
😂😂😂 same here, I’m glad he use the husky knee cushion while leaning over the engine bay.
my back is hurting just thinking about it but then again I don’t wanna know how much this whole job cost at a dealer
My favorite CZcamsr, for sure. I just love this man. His integrity, skill, manner of communication and edification, his patience, honesty...on and on. I love him. Thank you, Sir.
Knowing my car is going to be worked on by a master technician like you makes spending 5000 a lot easier. The owner of this car is one lucky guy. Great video as always.
What kind of damage you got that you’re spending 5000? If you don’t mind me asking
I think a B lot of these problems with the 5.7 is the thin oil recommendation 0w20. When I was station in Bahrain and Dubai, the Land Cruiser 200 is very popular and they run 20w50 and they have so many on the road with over 300k and they never have these problems. You can you tube search “ Land Cruiser oil change in Middle East” and watch them putting 20w50 oil in these engines.
I bought a 21 LC and I run 5w40 in it.
But that .0w20 is nothing but manufacturers meeting the US CAFE regulations. This same engine in other parts in the world recommend 15w40 in this engine.
Ahmed you give a new meaning to MASTER Mechanic God Bless.
This man has the best Toyota videos on CZcams hands down
🙌🙌🙌🙌
The 4.7 belt driven version of that engine is one of the very few engines that reached 1,000,000 miles. Toyota brought that engine over from the Lexus side of the house. This owner is smart in that he is taking care of issues well before they become an issue later down the road. Just remember, if it’s mechanical, regardless of brand name, it will need maintenance!
The same person that reached 1,000,000 miles on the 4.7 is about to do the same thing on the 5.7 you're watching here. He was at 900k miles last month so should be reaching 1 million mark soon! From what I read, he only had to do the alternator and water pump. Also the transmission went at around 800k miles but he's still on original tensioner & chains.
I can only think of this, the UZ, 3L, 18/22R, Some Volvos, Hondas, Mercedes, Deutz and a couple of old Ford/gm/chrysler v8/v6s that can reach that number. There is also a F150 ecoboost with 1M miles too something i never thought possible on a eco boost. That shows how maintenance is key in every engine.
The 4.7 belt driven is a UZ engine. The engine in this video is a UR engine. Both V8’s but totally unrelated otherwise.
@@UnitB Other than the timing belt and water driven water pump how are they unrelated? Toyota used that same 4.7 liter engine on the 4Runner when it used a V8.
@@jamram9924everything is different. They’re two separate engines designed about eighteen years apart. The 4.7 UZ is based off the 4.0 UZ that debuted in the original 1990 LS 400. The 4.7 has a timing belt, timing belt-driven water pump, iron block and aluminum heads, shimmed bucket valves, cams installed directly in heads, didn’t get VVT as an option until around 2005, no valley plate to speak of, starter under the intake. The 5.7 UR V8 is timing chain with accessory belt-driven water pump, all aluminum, hydraulic lifter valves with roller-rockers, does have valley plate, starter under exhaust manifold, VVT all years, cams installed in camshaft trays.
There isn’t a single part between these two engines that is shared. There is a lot more detailed information on Wikipedia: look up “List of Toyota Engines” and scroll down to UZ/ UR under V8 section.
I own a 2014 Tundra and have done every one of these repairs myself around 100k. I'm not a full time mechanic and can tell you it took me 7 days to do all three repairs myself. It wasn't easy, and I was in a lot of pain after working on this truck by myself from dusk to dawn for 7 days. That said... I'm still happy I decided to DIY it myself. I saved a ton of money and learned a lot about the 3UR-FE motor. One thing that really helped me was having the Toyota technicians service manual. I did a lot of research, ordered my OEM parts beforehand, and followed the manual exactly and everything came out great. Unfortunately this video wasn't out before I did this job, but I'm sure it will be helpful to the next guy who tries to DIY this repair in the future. Thanks AMD.
You got balls.
How about a similar video with the 4.6L? 👍
Yes, please!
I drove a 2010 Tundra with this engine for 10 years and 200,000 miles. It developed this noise after about 100,000 miles. I lived with it as it only did it cold. It also had the cam tower leak only in the driver side. Not bad, never reached the exhaust manifold so I lived with it. The only replacement I did on this engine was the water pump. I think it’s a great engine. 👍
Sounds like a garbage engine, unlike the 2uzfe
How long did you run it when you noticed the cam tower leak? I just looked at a 2019 and was heartbroken to see "seepage" on the passenger side, that toyota now says is normal. I dont see how a seep is normal in a 5 yr old vehicle, IN A PLACE that is known to fail. I assume the seep will eventually lead to failure as I haven't heard of anyone else who left it. Did you notice oil loss at oil changes? Did you only run it another 10-20k or are you talking like another 100k miles and it never got worse? This was my ONLY concern before purchase, and given the model year and mileage never did I expect to actually see this still being a potential issue.
@@st.schochko9822-I noticed my leak only on the driver side around 90,000 miles I believe. Passenger side never developed any leak. It was the type of leak that never reached the exhaust manifold and I NEVER had to add oil to the engine. Most Toyota engines will have a small list of “common” problems. Rest assured that Toyota did an exhaustive investigation of the issue. Of course, this engine is now discontinued and replaced with a twin turbo v-6. The issue you have will not cause any harm to your engine, however, Maintenance is key with any Toyota engine. I cleaned the oil leak every 20,000 miles or so just because I’m a bit OCD. Even without cleaning, I don’t think the oil would have reached the exhaust manifold. Most people wouldn’t have even noticed the leak. I have worked in a Toyota engine factory for 25 years and I notice most things about my Toyota engines. Don’t be heartbroken, your engine is one of the most durable, reliable engines ever produced by Toyota. 👍
@@survivordan2187 Thanks for the quick response and information. It’s greatly appreciated.
@@st.schochko9822Did you end up buying that vehicle? I’m in the same situation you are.
This is pinnacle toyota/lexus repair channel, no one comes even close, incredible work, great commentary, great work ethincs.
The 5.7 liter V-8 is a beast
Just had my 2014 tundra engine with 175k miles repaired for a head gasket leak in between the 5/7 cylinders. They did both sides and the gasket between 6/8 cylinders was on its way out too. While it was apart they found a small coolant leak coming the of the heat exchanger. Got it repaired, new head gaskets, new timing chain guides and tensioner's. Had a new water pump put in and new belt idle pulley and tensioner and new plugs. Dealer had my truck for 5 weeks and just got it back.
AMD you and Jose have the patience of the Saints, great job as usual.
I wish when I was a tech 20 years ago, I could have worked for your shop. I might still be doing this work today. You sound like a great shop owner.
You Sir, are a master mechanic! I've done some things in 50 years of car care nuttiness, but I wouldn't attempt this job in my best younger days, especially with engine still in vehicle! The increased complexity of newer vehicles and the training, education and experience required to work on them is really way beyond the capability of the regular DIY. God Bless!
I was a tech in the 80's and most engines were a walk in the park back then. No way today I would even touch something like this project. Being a mechanic is a young guys game.
Perfect timing: I am preparing to do this same work myself (a DIY mechanic). Your video covered everything in one swipe, with far superior insight than other videos.
Thank You!
I recently did this job. If you're just doing the tensioners, you don't even have to pull the intake manifold. It does not prevent you from removing the water pump or timing cover. One suggestion I'll make is make sure to label your timing cover bolts. There are 3 or 4 different sizes and they go all over the place. I took a piece of carboard and drew the timing cover on the board and "installed" each bolt on the cardboard cover so I can easily see where they go after I am putting it back together. Worked great for me. Also, taking the radiator down gives SO much space and makes this way easier.
@@iJava91 thanks for the he advice on the bolts. I have seen the "cardboard organizer" method before.
As for only doing the valve covers... My main driver is the coolant leakage under the valley plate... So I'll do the secondary air pumps as well (180k miles).
I had a 2013 Tundra SR5 and bought it new. During a 10,000 mile routine service, I was told that the cam towers were “weeping” oil.
The Toyota advisor told me that Toyota had a run of 5.7 engines that had basically contaminated sealant on the towers. The repair was performed completely under warranty and the leak never returned. I now have a 2019 TRD Off Road and have no issues whatsoever. Great videos!!!
I agree with your opinion on flat rate. Was an master tech at a Ford dealership. Some of the flat rates I believe Superman himself could not meet !! Great video and for hanging in even when you were sick. I salute you sir.
My 2008 5.7 with 150k has some "tick" and "diesel clatter" on cold mornings for about the first 2 minutes. I generally let it warm up before I drive it. And even then, I take it very easy for the first mile or so. And then- viola! - its totally silent. So far, no leaks. So, I'll just soldier on until something really goes south. I love the vehicle and it runs like new.
I'd love a similar video on the 1UR-FE. They seem to share many of the same issues mentioned here. Now, if only Ahmed knew someone with a 1UR-FE powered vehicle. "Cough, cough..GX460..cough.."
AMD, as always, an excellent, informative, accurate, and professional video. I am an ASE master technician with 17 years of experience myself, and I have a 14 Tundra, with the 3UR-FBE(flex fuel, no big difference). Currently has 126k miles on it, and I'm absolutely in love with the truck minus one thing. The abysmal fuel economy lol. 😅. It's doable. I'm like, very particular about my work, to the point that I have been called 'slow' by some employers(usually the ones who can't afford me but hired be to get their dead bodies off the lot). However my comeback ratio is legitimately 1% over the past 3 years. Do it right the first time!, and that is what I love about you and the unbeatable quality of your work AMD. While I haven't had any issues with my Tundra(other than the notorious rear wheel bearings, have done both), if I do encounter any of the issues in this video, I will definitely be using this video as a guide, or worst case, I will bring it to you, from St. Louis to Chicago(familiar with the place, lived in Glendale Heights for 2 years while in tech college) and glady pay you to take care of it. That's something I legitimately NEVER thought I would say. I ALWAYS do my own work, because after being in this field so long, I have seen first hand many many times 'technicians' that do not deserve that title, not even close to it. You, AMD, have my trust. That's rare, lol, I still count my money when it comes out of the ATM 😂😂. In fact, I would love to work for you. Your shop is immaculate, and looks very welcoming and positive. That does A LOT for worker morale. I'm sure as you know, the differences between a clean shop and a dirty one are important in instilling pride in your technicians, or destroying it with the 'it doesn't matter' attitude. Keep the content coming AMD! You've got a lifetime subscriber here. Actually, I'm going to make the trip to come see you in the near future. I still have friends up there and will just make a weekend out of it. From tech to tech, I appreciate you, and unfortunately the bad apples can spoil the bunch and sabotage the minds of some first time customers because they think a professional, honest technician is 'too good to be true'.
One complaint: why there are not many AMD in this world!? I need one near me!❤
I'm pretty certain this is the reason why the first owner of my truck sold it to me. It didn't start making the noise until much later in the day after I drove up to see it before I bought it. Thank you for putting my mind at ease for showing me what the real issue is. Lots of the tundra groups debate back and forth what it actually is. I shared your video with the groups that I'm a part of.
This guy is a genius. I wish I could clone him and transfer him to TX. No Toyota certified mechanics even close to this knowledgeable in El Paso. It seems that Toyotas main engine issues are leaks. My 2008 5.7 Tundra has had a cam tower leak and a rear main seal leak, both repaired. Other than that, no issues.
$5000 to get another 250,000 miles out of this truck is a bargain.
You blow me away sir but, this kind of detailed work could not be trusted to 95% of the immature/irresponsible mechanic’s out there.
You have my utmost respect!
I would love for you to do a complete go through with my 91 Toyota Soarer ( Lexus ) RHD 4.0 LTD here in Dallas TX.
I just can’t trust anyone here to understand this car!
Now that would be a video project lol 😆
188k miles on my 2014 Tundra. Just had my first “major” problem last week. My brake master cylinder took a dump. Only other issue I’ve had was a cracked radiator cap last summer. Easy cheap fix. Did the driver side cv axle at 120k miles (I have a 2.5” lift on Bilstein 6112’s so probably a bit premature due to the lift). Passenger side CV at 170k miles. Otherwise, fluids, brakes, tires, and a couple batteries.
My old Tundra (2013 double cab, I traded for a crewmax when we had kids) had the cam tower seal issue when it was pretty new at around 30k miles. My 2014 never had the cam tower seal issue.
We just traded my wife’s 4runner for a Sequoia. I was looking at the new ones, but I’m concerned with the issues they’re having with the new engines so I decided to go with a 2nd gen 5.7 instead.
Wow! This is what separates the men from the boys. I agree with the owner. Do it once, do it right. Jose' is awsome, isnt he? Great job as usual AMD. 👏 👍
❤
My 2008 sequoia 5.7L just hit 219k miles. Zero issues except the aux port for the radio and had to replace the radiator hose.
What did you do about the aux port? Mine is cooked in my ‘07 Tundra. Miss listening to music from my phone 😔
@@jimmylusk4506 buy a scosche Bluetooth fm transmitter. I had one for years and it was great.
It plugs into the power port and you tube it to a specific channel it says and then hook via Bluetooth to your phone!
I had my aux port replaced on my 2008 toyota sequoia limited it work fine now
I watched this 2-3 times and hearing now the how shops charge (45:00? mark). I remember one shop I used to go to always slammed with work from other shops. :D Looks like some shops (nicer) charge the "book" price and send the work to another one, then they split the difference. So much work that now I don't go to that shop and learned how to work on my car since they charge way high now. :(
I don’t say this enough, just to push the like button: Really appreciate your videos, as a multiple Toyota vehicle owner. ❤
I ended up doing a massive 150K mileage maintenance job on my 07 Tundra last year, and the manifold gasket job seemed intimidating at first. It was a cakewalk compared to doing the plugs (something you would criss-cross in your mind for difficulty on Most vehicles). While overall the reliability is what sold me on the truck in the first place, the packaging on it is Not particularly great when it comes to maintenance. Things that should take like 45 minutes as most on any other vehicle, on the 3UR Tundras can be an all afternoon job. Ditto on the starter and alternator...
After I was done with the whole thing, I swore that I would high five the engineers who did the engine, and simultaneously crotch-kick whoever gave the okay on the packaging on this vehicle! 'Shoehorned' for a DIY driveway mechanic sans a garage is an understatement.
What was difficult about changing the spark plugs on a 5.7?
@@tundratime9702 Access primarily. There's something in the way of every single plug, like a major wire loom, or a relay box/bracket in the way of the plug access port; stupid things that you have to move or loosen just to get to the plugs. I used every extension I had as they're pretty deep too, though I didn't have a wobble attachment which would have been helpful to get better angles.
I'd take the DAY OFF, too . . . This is one complicated repair. I guess prospective mechanics always come to the realization that 'this job can get complex' at times. Do I want to continue in this career choice? Hats off to the few, like CCN, who love it and continue on to mastery.
I just recently went though this work myself. 60k miles on my 2015 V8 Tundra and has been "knocking" on startup for few minutes until oil pressure builds up. Replaced both chain tensioners and the noise has been now gone.
The word you're looking for at 41:20 is "intuition". Comes with experience :)
One thing I like about this guy is he is happy to acknowledge that Toyota vehicles have issues. He has stated that he stays very busy repairing Toyotas. Now, maybe not as busy as some other techs that service other brands. Just because that vehicle has a stylized "T" on the front doesn't guarantee anything. Recalls for rust, stuck pedals and the fact Toyota needed a 5 BILLION dollar bailout just underscores they have their issues as well. Scotty Kilmer calls them out as well when they need it. GREAT VIDEO!
As always great work Ahmed!
Love the audio examples, helps me know what to look for.
I wouldn’t hesitate on dropping 5k on my tundra to get another 150k miles out of it! Finding someone you trust to do this job is the hardest part.
I just made my first appointment with AMD's shop. I live about 25 minutes away from him. I just completed Toyota's free maintenance on my 2023 Corolla Hybrid. Just going in for an oil change. I hope they can handle it! 🤣🤣🤣
Too funny!
I've been seriously thinking about making the commute from Georgia once a year so he he can check everything 😄
You’re so lucky to have him in your area
@@Len10293 I agree. I know he'll treat my Corolla as if it was his own.
Another excellent video with full explanations along the way. Thank you
Another great video of a solid rig !!! Beast of a motor.
Honestly to pay 5k to keep this engine in the mint condition is nothing compared to paying 100k+ (CAD) for a newer design. This V8 if maintained properly will outlive(IMO) many new modern models. The owner of this truck is so lucky to have you to look after the engine!
Thank you for sharing as always. Blessings to your family and your team at the shop.
Great video. Hats off to you guys for the great work you do and the attention to the small details. Wish I lived closer to get you all to do the service work for my Toyotas
This is got to be one of my favorites videos. Great job AMD.
Excellent professional work and Video !! ... Thank you ...
The fact that you leave in your (very rare!) mistakes and talk through them with us is a rare thing. You, good sir, are a treasure. 🙏🙏
This would have been a solid 3 or 4 days for me. Very impressive work. Thank you for the video.
AMD, Seeing you beavering away at this 5.7 V8 reminds me of the days when you could get a Tundra with a simpler 4.0 V6. 😉This may be the last 'Toyota' V8 but a new twin turbo, 700 hp V8 is on the way for an upcoming Lexus. 🤩
Is it really in development?
Man if they put that in a new isf😮😮
This sounds too good to be true lol that’s what the ISF should have been to compete with bmw in performance
Daughter is coming over for me to change her oil on her 3.3l Highlander right now. Love my 2011 4.0 l Tacoma. ❤️ all things Toyota!
@@tomphillips2608 What year was the 3.3 V6 Highlander?
your professionalism is off the charts! cleanliness and organization is amazing! love watching your channel !
Another outstanding video.
Thank you Ahmed for what you do for us Toyota owners and enthusiasts.
I LOVE the cost breakdown...I could watch this all day.
Have the 2017, love how it looks. The V8 is awesome.
Your channel is so helpful👍🏻
That was eye opening. Thanks for sharing the process and your thoughts. 😁
Labour hours - I remember my first Neon and new head gasket every 52k almost like clockwork - they charged like $800 the first time, then $200 with warranty support by then, then free with had metal head gasket upgrade included. But I talked to the guy the last time and they had the car back to me - it was only a few hours - and the Service Manager said that they had done this repair so often they did it in like 1/4 the time it should - and I remember him saying - we learned a way to not even need to break it all down like we used to.
Wow, that’s crazy 😮
AMD, this us one of my favorite videos so far. I've got the 2016 Tacoma, but was so enamored with rhe way you detailed everything. Thank you and I hope you guys are feeling much better. Take care and be safe!😊
Amd, your work is fantastic as always, im constantly impressed with the content you produce for us. Thank you for this.
Your hard work ethic, your admiration of modern engineering, and your desire to help people has brought you very far.
👏👏👏👏
Best video ever! I hate cam towers! Toyota design flaw. My dealer had to reseal both towers that were leaking. 4.6L 2013 Tundra at 38,000 miles. Not a DIY job. It took them 1 one week. Go back to one piece head or use a gasket Toyota.
I'm glad I found this video. This noise started 2-3 days after I made my final payment.
I Love this Channel, Salutes to you Guys💯💎
My gs460 with the 1urfse has the annoying timing chain tensioner rattle at startup as well. Glad to know its not a grenading type problem. Thanks TCCN!
Thanks for the heads up on the labor time on this job AMD! I’m sure your notes will come in handy one day. I get all the timing jobs at my shop✌️
@TheCarCareNut:
Thank you for sharing this video with us, your subscribers.
It shows how intimidating that job is.
And now if you don't mind, would you please tell us, your subscribers the total cost of this repair?
We own a 2016 LX570 and it would be good to know what this repair job would cost us.
Thank you again!!!
When I worked at Toyota we started pulling the cab off to do cam towers. Made the job so much more enjoyable.
What ever your hourly rate is you worth each single dime of it and more ! May almighty bless you and keep you, as what ever I now know about cars I learned from your videos.
Wow, I think I'll just stick to oil changes on my 2020 tundra. Thanks for that very educational video!
I bought a 2020 Ltd last year with 33k miles. I hope it’s my forever truck.
Changed the oil first thing and again at 38k miles along with both diffs. Transfer case. Also had an OEM transmission cooler, drain and refill fluid. Power Stop extreme breaks and rotors, Stellen ran air box, filter and air ride air bags. It pulls my
18 ft . Camper over the
Colorado Rockies so I hope I am doing the proper care and feeding.
Wish you were my mechanic but so glad and appreciate your knowledge. Thx for sharing.
Ahmed, you have my full respect….!
Bro you’re amazing and your honesty is so great in this! I have done this job before but I found it so much easier on my back if you just remove the cab and work on everything with the cab off and engine on the frame, so much room to work with and not a killer on your back and belly, just thought I put it out there! Other than that, great job man love learning from you and your perspective on things
Nice detailed video of a large job. Great advice for all mechanics working on customer's cars AMD. May God continue to bless and keep you and your family 🙌🙌
I remember Chryslers original Intrepid and how cool it was that the V6 was sitting correctly in it - so you could see both sides very easily. But not appreciated and so common with V6 to only have easy access to the front 3 cylinders.
Totally enjoyed your video!!!
Thanks for the great videos. I learn a lot. I think the term you are looking for is a sixth sense.
I cannot wait for you to hit 1M subs. You deserve it, Kind Sir!
Excellent work!
I have fixed this before chain tapping. If you dig into TIS enough AMD, you will find a New Car Feature description of that Tensioner Gasket. The gasket is intended to regulate and improve oil pressure to that specific tensioner.
Congrats for this video. Looks awesome definitely not duy... really like the transparency and the honesty....
What a great video. Entertaining and informative. I’m a very experienced back yard mechanic and this job intimidates me a little. Mainly because of putting sealer down inside the engine
Love love love your channel. You are my go-to guy on any issue on my 1st gen Tundra. In my opinion, the best engine 4.7 V8. You and Jose are the best. Thank you.
Can you do a common problem detailed video on a 22RE timing chain and guide replacement? Love your detailed explanations!
This is why I love AMD, even though he loves Toyota's he isn't your typical fan boy who think Toyota can do no wrong, and every single make and model, is perfect and reliable. AMD is down to earth and will say it like it is, some Toyota models and engines are straight up trash, and have some major issues before Toyota fixed them.
This is wonderful! I have the same truck in quicksand. Now I know what to keep an eye out for. It's the best vehicle I've ever owned. It's 8 years old and has never broke down. I've replaced the brakes, wipers, and I regularly replace all fluids.
Thank you AMD for this very informative video, I appreciate you making a video about the 2nd gen Tundra. I hope to never have to tear my engine down for a repair such as this one, but if I do, I might put my truck on a carrier to TCCN 😊
thank you for a great and detailed video
Wonderful work and would make many home mechanics go crazy.
There’s no many of these engines out there, hopefully your video inspired many technicians to do the same honest work.
Thank you sir for another excellent video! First, I’m very mechanical and enjoy learning of the inner workings of these fantastic Toyotas. Second, I will never even think about complaining about working on my 2007 FJ Cruiser ever again.👍😎👍
I had a 09 ls 460 that developed the exact tapping noise at start up that progressively got worse but cleared up at at full temperature. Along with other issues it would have costed me about 10k to fix. Ended up trading it in. Loved the smooth and top end power of this motor.
Best Toyota tech on YT, real pro. My ‘07 5.7 had to have the air injection pump fixed, it developed the cam tower leak on the psgr side. Still ran great at 212k when a collision put it to pasture. Replaced it with an ‘18.
Great video, enjoyed outstanding video quality, your explanations and recommendations.
great video keep up the good work. really enjoy your content
I had a 2008 Tundra SR5 TRD Offroad Crewmax that I put 240,000 miles on. The engine did not make noise and did not burn oil. No leaks, no ticking, nothing. I traded it in on a 2021 Land Cruiser. Kinda wish I had kept it now. Miss that truck. It and the Land Cruiser would make the perfect combination.
You are worth every penny of your fees. Thanks for the videos. They and you are exceptional.
It's so fun watching him work on the car with a voiceover
Man, AMD, I REALLY love your videos. I never miss one!! Thanks for being who you are!!
From South Africa.
P.S We DEMAND daily videos!!!!!
A magnificent project!