After watching the whole video, I have decided that I'm not going to keep the oil filters, but rather, I don't ever want to see it again in front of my eyes. Great, and thank you very much.
You can use a 4" pcv pipe with a rubber pad on it or velcro to hook on the sandpaper why cut up a good belt for the belt sander. Your better off cutting the oil filter open to look at the filter materials inside for metal shavings. This will tell you thd shap of the inside of the motor
Wow in order to save money to make this tool, I would have to buy a welder, a couple different saws and the grinder, tear up a perfectly good sanding tool, and dull several blades cutting the 60 grit sand paper. Wow! What a penny saver!!
@@Maciejka1955 Yes maybe so, but since I don't have the tools now, it means, I do not do much of that kind of work. (Google Translate:) Tak, może i tak, ale skoro nie mam teraz narzędzi, to znaczy, że nie wykonuję zbyt wiele tego rodzaju pracy.
Estimados cada herramienta esta fabricada para determinado trabajo. Una *idea por genial que parezca* podría tener consecuencias negativas en un desperfecto. En este caso ese cilindro no está hecho para soportar fuerzas de más de 11.000 rpm
I just went to my garage and threw away 5 brand new oil filters so that I will never be tempted to do anything this insipid. Thanks for the reminder of "The right tool for the right job" by showing the opposite.
Удивило в этом ролике всё Чел, ради гайки распиливает грибок для обработки дерева Тот самый, которым дерево обрабатывать очень удобно Из всего этого получается довольно странная приспособа Вовсе не уверен, что такой штукой обрабатывать дерево удобнее нежели тем самым грибком по дереву
Приветствую! А мне одному кажется, что Тем грибком, что распилили как донора, дерево обрабатывать значительно удобнее А гайку, гораздо проще купить Вместо того, чтобы портить готовое изделие? В общем, лайк за находчивость, но на мой взгляд приспособление абсолютно бесполезное Т.к. не надо изобретать велосипед, он уже существует
O lixamento redondo de uma superfície plana cria saliências irregulares. Tira de lixa plana para superfície plana não áspera. O projeto de reciclagem pode lixar superfícies curvas, mas o filtro usado serve apenas para reciclagem.
Pas mal,j'ai fait ça avec du tube PVC épais pour travailler des tube en fibre de verres( propulseur d'étrave pour bateaux),mais je trouve que le double face est un peu léger en résistance je préfère la colle neoprene ,pour l' avoir éprouvé ça tien bien🤗👍
yeah baffled me. Checked my local home depot and proper drum sander kit starts at ~$10 meaning the cost of the disc and the sanding belt are nearly the same price making this pointless and dangerous.
Последнее время ролики с названиями: бриллиантовая идея, секрет и т.п. смотрю начало, затем поолистываю, а в конце вижу результат... Лучше огонь добывать трением! Быстрее приходит удивление на сколько человек продвинулся в развитии...!
Oh, tio! Será que o problema não está em você? Desmerecendo o trabalho do próximo! Será que vc é bem mais talentoso? Reflita melhor! Humildade não faz mal a ninguém!
Nossa muito inteligente, ja tinha uma base para colocar um disco de lixa, e fazer o serviço ,ai ele destruiu o suporte para fazer isso, perder tempo e mais trabalho!!! PARABENS!!
I don't know exactly what he's using but the Zep chemical company makes a product called Zep Off and it will do that to just about any automotive paint and will melt a fog onto plastics such as headlights and taillights.
Hacia mucho tiempo no veía a una persona perder el tiempo haciendo artilugio, bueno fuimos dos que perdimos el tiempo el haciendo el video y yo viendo el video o todos los que vimos el video,
Terrible idea. Any balance issue, poor weld, or tape lets loose and someone's getting hurt. A typical disc grinder is hitting 9k-12k RPM. Really don't recommend anyone trying to replicate. You can get a whole drum sander kit to use with a drill (lower, safer RPM) for about the cost of the pad and belt you sacrificed. Or save up and get a belt sander which would be the right tool for what you are demonstrating your DIY drum on.
@@URGENMasters Um, no. It might test fine, but poor balance and hardening in the weld area mean it will fatigue badly and fail. Given the rotational speed of an angle grinder that's a dangerous scenario. I just hope no one is foolish enough to try this themselves.
After learning this secret, I will never throw away my old belt sander.
LMAO!!!
такая хрень жаль своего времени
No shit!! Just wasted all that time for this bullshit.
EXACTLY!!!
That is so stupid
I cannot believe you destroyed that sanding pad for the nut 😂
Yeah I'm still scratching my head after watching this video
A warn out grinding disc would make more sense, or the 5/8" nut is pretty cheap. If the filter has bolt threads, then back to the drawing board.
Exactly
The scissors will also be happy after cutting sandpaper.
Économies de bouts de chandelles, atelier bien équipé mais le cerveau n'est pas là 😢
After watching the whole video, I have decided that I'm not going to keep the oil filters, but rather, I don't ever want to see it again in front of my eyes. Great, and thank you very much.
AFTER LEARNING THIS SECRET, you will never throw away the old oil filter.....
Yes I will...😁
Ок
me too lol this isn't a secret its madness
@@URGENMasters Didn't you know they make drum sanders for a grinder.
LOL !!!!!
10000 RPM. Ihr habt doch einen an der klatsche.
After watching this, I will for sure throw away all my Oil Filters and get a better sander!
Ok. Buen trabajo gracias
Взял распилил шлифовальный круг, чтобы добыть гайку, когда можно было этим кругом шлифовать 🤦🏻♂️ сука гений просто 🤪
Imate pametne stvari da se pogleda i nauci, hvala vam
A tu redukci na závit vezmu KDE ??? Upeču si ji v troubě blbe ???
Узнал секрет,но всё равно выкинул старый масляный фильтр!😂😂😂
Oczywiście ten psełdo sekret był dobry 40 lat temu tyle że wtedy i kątówki nikt nie miał bo były trudno dostępne i drogie.
😆
И я тоже 🤦🏻. А зачем его держать, у меня две шлифки не каждый месяц работают, зачем ещё хлам в доме? 🤠🔥
Идиотизм не лечиться
I like the improvised work table at 2:04, for the band saw, making it a vertical band saw, thanks for the idea!!!!!
It would be cheaper buying a ready-made one
You can use a 4" pcv pipe with a rubber pad on it or velcro to hook on the sandpaper why cut up a good belt for the belt sander.
Your better off cutting the oil filter open to look at the filter materials inside for metal shavings. This will tell you thd shap of the inside of the motor
Dobrou jak slepit dva umělohmotný pásky a čim
Если хочешь по едалу фильтром или отлетевшей от него наждачки, можно сделать.
Wow in order to save money to make this tool, I would have to buy a welder, a couple different saws and the grinder, tear up a perfectly good sanding tool, and dull several blades cutting the 60 grit sand paper. Wow! What a penny saver!!
yeah he aint footin the bill some one else is. school or a fab shop.
Ale narzędzia by Ci zostały do następnych prac
@@Maciejka1955 Yes maybe so, but since I don't have the tools now, it means, I do not do much of that kind of work.
(Google Translate:) Tak, może i tak, ale skoro nie mam teraz narzędzi, to znaczy, że nie wykonuję zbyt wiele tego rodzaju pracy.
Show boa ideia !👌👌👌👌👌👋👋👋👋👍👍👍👍👍
Incredible, I would be so shy to post such a video, we all know a tool for this purpose and we call it, à belt scander. 😅
Estimados cada herramienta esta fabricada para determinado trabajo. Una *idea por genial que parezca* podría tener consecuencias negativas en un desperfecto. En este caso ese cilindro no está hecho para soportar fuerzas de más de 11.000 rpm
А что просто взять гайку нельзя, надо сломать диск
Estas en lo cierto no le veo sentido a eso y el gasto que conlleva Acer eso y afinar no te rinde ningún resultado
Parabéns pela aula... Agora eu aprendi a trocar um pneu de trator... 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Pérdida tiempo jejeje y pensar que hay desocupados
Sta cemu to kad imaju specijalne i jeftine slajferice za drvo.
Красив Работа 👍,et si la meuleuse est fixé se serait Plus simple en maniant le bois, Beau boulot Très bonne idée🤟💥
I just went to my garage and threw away 5 brand new oil filters so that I will never be tempted to do anything this insipid. Thanks for the reminder of "The right tool for the right job" by showing the opposite.
На кастрюлю тоже можно так сделать, если ручки отпилить и гайку ко дну приварить.
Будет круто 🤟
Понравился кожаный фартук и смывка. смывка хорошая!
особенно мне понравилось как ( майстер ) добывал гайку на 14ть . жду ролика как из машины сделать самокат .
100% И я охуел! Мастер на всю голову!
А я не помню, возможно там левая резьба?
Как мне кажется, гайку купить намного проще
Удивило в этом ролике всё
Чел, ради гайки
распиливает грибок для обработки дерева
Тот самый, которым дерево обрабатывать очень удобно
Из всего этого получается довольно странная приспособа
Вовсе не уверен, что такой штукой
обрабатывать дерево удобнее нежели тем самым грибком по дереву
@@srstep4647 болгарк конец это точно. 😅
🐈⬛
Приветствую!
А мне одному кажется, что
Тем грибком, что распилили как донора, дерево обрабатывать значительно удобнее
А гайку, гораздо проще купить
Вместо того, чтобы портить готовое изделие?
В общем, лайк за находчивость, но на мой взгляд приспособление абсолютно бесполезное
Т.к. не надо изобретать велосипед, он уже существует
Я и написал ему.че гайку найти не мог нужную?
Тьі - посмотри, скоко "Вэ Дэшки"" выливает!! Нерациональный!
Parabéns!!!! aprendi a desperdiçar o meu tempo. Gracias, por perder mi tiempo
O lixamento redondo de uma superfície plana cria saliências irregulares. Tira de lixa plana para superfície plana não áspera. O projeto de reciclagem pode lixar superfícies curvas, mas o filtro usado serve apenas para reciclagem.
Pas mal,j'ai fait ça avec du tube PVC épais pour travailler des tube en fibre de verres( propulseur d'étrave pour bateaux),mais je trouve que le double face est un peu léger en résistance je préfère la colle neoprene ,pour l' avoir éprouvé ça tien bien🤗👍
Ju je
Por favor, cuan sencillo es encontrar otras formas de hacer esto, Por favor!
Cannot believe you destroyed a sanding disc to get a locknut!
I was gonna comment the same but decided to check if anyone else had already beat me to it! Lol
Ha, 3rd, had the same thought!
yeah baffled me. Checked my local home depot and proper drum sander kit starts at ~$10 meaning the cost of the disc and the sanding belt are nearly the same price making this pointless and dangerous.
Из за гайки разломать шлифнасадку это верх совершенства
Thanks for sharing.😊
Последнее время ролики с названиями: бриллиантовая идея, секрет и т.п. смотрю начало, затем поолистываю, а в конце вижу результат... Лучше огонь добывать трением! Быстрее приходит удивление на сколько человек продвинулся в развитии...!
Ок
Aylak bakkal ayvasını tartar adlı çalışmasını izledik urgen ustamızın. teşekkürler urgen dayı 🎉🎉
Fácil... requer apenas umas peças, máquinas, ferramentas, paciência e desperdício de material e de tempo! Ótima opção para quem não tem o que fazer!
Oh, tio!
Será que o problema não está em você?
Desmerecendo o trabalho do próximo!
Será que vc é bem mais talentoso?
Reflita melhor!
Humildade não faz mal a ninguém!
Для этого существует ленточная шлифмашинка.
No way of getting that 7 minutes of my life left
When you realise it's just a 15mm bike wheel nut.
Güzel fikir
Teşekkür
belki daha iyisini yapabilirsin🛠️🔥💪
Nossa muito inteligente, ja tinha uma base para colocar um disco de lixa, e fazer o serviço ,ai ele destruiu o suporte para fazer isso, perder tempo e mais trabalho!!! PARABENS!!
Oil filters are flimsy. That's going to bend and mangle someone's hand.
Машинке придет кирдык очень быстро,большой момент нагрузки от фильтра с наждачкой на маленькие шестерни ушм.
Bonne idée bravoooooo.
wow..mantap..sangat luar biasa..💓👋👋👋👍👍👍🙏🙏🙏
That right there is what is called over engineering. Also known as a solution looking for a problem, and under delivers.
I can do the same thing with my belt sander without destroying anything and not wasting all that prep time with the filter. No thanks.
Good job Sir.
7 minutes and 40 seconds of my life I'll never get back.
Show valeu muito bom 👍🏾👏🏾👏🏾👏🏾🇧🇷
Смотрел до конечного результата ,за это время в ручную шлифанул куб досчечеков .
Два
@@URGENMasters два с п ире куром .
😉)
Ile szlifierek to wytrzyma😮już fibra jest dużym obciążeniem. Ale kreatywne i niebezpieczne
I've never seen paint stripper work that good ! That's some really great stuff.
me too!!
I don't know exactly what he's using but the Zep chemical company makes a product called Zep Off and it will do that to just about any automotive paint and will melt a fog onto plastics such as headlights and taillights.
Да открытие века. Весь инструмент есть а вот шл.машинки нет
I believe I'll keep throwing away my oil filters and just use my belt sander I already have
Mucho trabajo para un resultado inesperado
así es
Эту работу можно спокойно сделать и безопасней из того шлифкруга, который разломал ради гайки.
Сними про это видео умный человек!!! Первое видео будет как раз на канале
@@Trantekli & έρ*
🤣🤣🤣🤣
Excelente 👏👏👏👏👏👏👏
What is the paint remover you used?
My angle grinder is around 20,000 rpm . this looks a bit dangerous for such a high rpm.
Muito bom ,porém eu ainda prefiro deitar fora ,é bem mais fácil
bem, se não for necessário
Clever idea 👍
Ок
El video interesante, pero un fondo musical molestoso
Время зря потерял.
brilliant idea indeed!! 😃
cheers for sharing!! 👍
Interesting re-tasking of something disposable, good if you don't already have an alternative.
Приблуды как раз на одну доску делать тебе нех.
🛠️🔥💪👍🤗
6:28 genialna fabryka kurzu! Sama krasiwaja, ot czto...
Muy buena idea pero todo ése proceso es más costoso que comprar uno nuevo... aquí en mí Venezuela hermosa
Super!
да хорошая идея для быстрого уничтожения болгарки
Коту делать нечего,он от тоски Яйцы себе лижет
😁🥚🥚🔥
Genial super
Мастерю деревянный АКМ, Готовлюсь к могилезации. Идея годная.
e eu achando que ele iria recuperar o filtro para reutilizar kkk
ماهى الماده الرشه على الفلتر ماشاء الله افكر جميله الله يبارك فيك استاذ
Зачёт твоему рабочему фартуку!
Daña un disco de lija para hacer otro excelente 👌
Comentario irónico o realmente te pareció bueno esa flor de cagada?
Es como el francés que sacaba dientes sanos 🤣
@@GreccoRussoM sí un dolobu total! 😁
Nice info, thanks for sharing it :)
Ingenious solution to a nonexistent problem.
I never seen so much work put into something that there must be a dozen different ways to get a tool that would do the trick
Насадку наждачки для ушм для шлифования сломать, чтоб сделать приблуду для шлифовки только побольше и не удобную. Не понимаю 😲
Клиент Доктора Дью....
Very good ideas for the quality video and one job with the professionalisme. Very nice and champion.
Как дело с дисбалансом, с болгаркой без регулятора оборотов, получится (на максимальных)?
Нет конечно, только с регулировкой и плавным контролем
Хайпанул! Отличился идиотизмом! Просмотры будут.Жги в том же духе.Как из пули сделать говно,например.(Не благодари)
Просто обалдеть,,😆
You know you can BUY one of those 'lock nuts'?!
You don't need to destroy a sanding / polishing pad.
I'm really beginning to hate what CZcams has become.
A sea of click baiting useless content for the most part. Oh well.
do not despair, this is the modernity of the algorithm!
Hacia mucho tiempo no veía a una persona perder el tiempo haciendo artilugio, bueno fuimos dos que perdimos el tiempo el haciendo el video y yo viendo el video o todos los que vimos el video,
عمل ممتاز جدا
I think I’ll just use my belt sander.
Это каким же надо быть ..... чтобы разрезать из за одной гайки шлиф круг😱.....это все можно сделать не напрягаясь из простых деревяшек
Просто купить их
Atmayıp nereme sokacağım , Video daki malzemeleri nerede bulup ta aynı işlemi yapacağım , Asla atmayacakmışım😅
La moraleja es como armar una herramienta rompiendo otra .
Innecesario hecho a perder una herramienta, pensé q reciclaria el filtro lavandolo y volver a usar,el filtro es caro
Dang I will never get that 7 minutes of my life back!
Bro really ?? What a waste of materials but most importantly of time and effort
Terrible idea. Any balance issue, poor weld, or tape lets loose and someone's getting hurt. A typical disc grinder is hitting 9k-12k RPM. Really don't recommend anyone trying to replicate. You can get a whole drum sander kit to use with a drill (lower, safer RPM) for about the cost of the pad and belt you sacrificed. Or save up and get a belt sander which would be the right tool for what you are demonstrating your DIY drum on.
it was a creative experiment and in my opinion it will turn out well
@@URGENMasters Um, no. It might test fine, but poor balance and hardening in the weld area mean it will fatigue badly and fail. Given the rotational speed of an angle grinder that's a dangerous scenario. I just hope no one is foolish enough to try this themselves.
Больше загубил ,чем сделал ! Типа : разломал мотоцыкл , что бы сделать велосипед.
Éxitos, es mas fácil comprar la tuerca y no dañar el disco
@@victormanuelmorenojerez5991 проще купить лепестковый диск, а не @бать мозг.
Tudo isso pra fazer um rolo de lixa.
Faz com um cano d'água
Да не велосипед,а самокат.
Výstižné napsáno. Nechápu....... stále nechápu. Nikdy nevyhodite filtr ¿ :)
Boy, there's 7 minutes and 40 seconds of my life I'll never get back. 🤪
What did you spray on the filter?Worked really good.
Paint remover obviously
С таким биением по моему подшипник долго не проживёт
А ему на подшипник пофиг. Главное, просмотры набегают