Maschine Mikro MK3 Tutorial Part 3: Using Effects, Song Arrangement, Exporting
Vložit
- čas přidán 4. 07. 2024
- Watch the FULL series of tutorials: • Maschine Mikro MK3 Tut...
🔥 Get Maschine Mikro geni.us/YvKAk
Subscribe for more tutorials like this one!
In this video I show you how to play a melody, add effects, create scenes, and construct a song on the new Native Instruments Maschine Mikro MK3. I demo how to select a sound, use the keyboard mode, record your tune, and then add effects. I demonstrate how to add an internal effect that comes with the Maschine Mikro MK3. Then I show you how to adjust the effect. I create additional scenes or variations of the beat, and then put scenes together to create a song using the Maschine software. Finally I show you how to export the entire song to a file that can be played on any device, or imported into your DAW. If you haven’t already, check out the first two tutorials in this series here:
Tutorial 1: • Maschine Mikro MK3 Tut...
Tutorial 2: • Maschine Mikro MK3 Tut...
Buy the Maschine Mikro MK3 here: bit.ly/2Pg7lZL
#MaschineMikro #NativeInstruments #SanjayC
- My Music GEAR -
MacBook Pro 2018 - amzn.to/2pSdTn6
Focusrite 2i4 audio interface - amzn.to/2l1wjiq
Ableton Live Suite - amzn.to/2EimlpH
Ableton Push 2 - amzn.to/2BmcWHQ
Ableton Push 2 stand - amzn.to/2ByZuVr
Presonus Eris 4.5 Monitor Speakers - amzn.to/2BVsJkA
Presonus Temblor T8 Subwoofer - amzn.to/2CF6wrX
Beyerdynamic DT-770 250 ohms headphones - amzn.to/2CWVnP3
Shure SM7B microphone: amzn.to/2KlLzWd
Rode NT1A: amzn.to/2Lfa7gr
My main keyboard Korg SV-1 - amzn.to/2BLUrxC
Akai APC Key 25 - amzn.to/2DpBUI0
Roli Seaboard Block: roli.com?rfsn=1976879.0ed04
Roli Lightpad Block: roli.com?rfsn=1976879.0ed04
Roli Songmaker kit here: bit.ly/2DD9aPr
Korg NanoKontrol 2 - amzn.to/2BM2oD6
MidiFighter Twister - midifighter.com
My monitor - LG 4K 32" - amzn.to/2BKtbiZ
Native Instruments Komplete 12 Ultimate - amzn.to/2RU2DUk
Native Instrument Komplete Kontrol A25 - amzn.to/2OzLYm4
Native Instruments Maschine Mikro MK3 - amzn.to/2JW02W5
Soundtoys Bundle - www.soundtoys.com
Artiphon Instrument 1 - amzn.to/2FxtAqy
MoveMIDI - movemidi.com
Touché by Expressive E - amzn.to/2JVnx1k
Arturia Minilab MKii - amzn.to/2pdnvJ6
- My camera and recording GEAR -
Panasonic Lumix GH5 - amzn.to/2H6qGdo
Panasonic Lumix G85 (previous camera) - amzn.to/2IP6Pjc
Canon G7X (point and shoot) - amzn.to/2DqOkz6
Close up lens (Panasonic 20mm 1.7) - amzn.to/2BVTXHL
Zoom lens (Panasonic 12-35mm 2.8) - amzn.to/2s7uqFh
Rode VideoMic Pro Plus - amzn.to/2s86v90
Rode VideoMicro (my old beloved mic) - amzn.to/2BLPxRe
Joby Gorillpod 3K - amzn.to/2s76MJ0
Mic Stand Camera Adapter (turns your mic stand into a tripod) - amzn.to/2xaOxaN
Large LED Light - amzn.to/2Dot8K8
Small LED Lights - amzn.to/2BgT2hu
Philips Hue Bloom (for some color lighting) - amzn.to/2KVoNkD
Umbrella for lighting - amzn.to/2s8BZvr
Zhiyun Crane 2 Gimbal - amzn.to/2BvQmRc
Camera Motorized Dolly (slider) - amzn.to/2IOJG0n
DJI Mavic Pro - amzn.to/2zbALk3
Final Cut Pro X - www.apple.com/final-cut-pro/
TubeBuddy CZcams Tools - www.tubebuddy.com/sanjayc
- FOLLOW ME on Social Media-
Facebook: / sanjaycofficial
Instagram: / sanjayc
Soundcloud: / sanjayc
💼 Business contact: Sanjay@SanjayC.com
best maschine tutorials on youtube
When you are new to the Machine, everything looks so complicated... however, going through your tutorial step by step brings some light in the dark :) thank you for this!
You could honestly be a teacher at a university if you wanted to. You go at great pace, you’re very detailed and informative and you’re easy to follow. Great stuff. I’m really new to electronic music and I finally feel like I can tackle my maschine
I really appreciate that :-)
I don't think there are any better Mikro MK3 tutorials out there. I really appreciate how you get straight to point and keep everything simple. Thank you!!
Thanks so much Raghev!
4 videos that covers a whole semester dude you are awesome as a teacher hopefully you keep uploading more videos
Thanks! You help me a lot man
Thanks, Elmer! :-D
Ahh mate, your stuff is so good honestly thank you - made this proper easy
You're welcome!
Ive learned more in 30 minutes than 3 years!
Best comment of the day!
Endless respect for the banshee!
Master Chief for life!
You are so useful I’ve been looking all day for a CZcamsr with good video quality that can teach me how to properly make a beat
Nice! Glad we found each other! :-)
what an amazing time to be alive right now
Haha...true true!
This is the greatest collection for the Maschine Mini MK3 period!!! Thank you (from all of us)!
You’re welcome!
Sanjay! I gotta tell you of all the tutorial videos on CZcams yours is the clearest and easiest to under. I have even watched videos of yours for gear I don't have. Great teacher! thank you!
For sure ,the best Tutorials on Mikro Mk3 by far , I was lucky enough to buy an almost brand new one from someone who was upscaling to a Jam ,and not having enough paper ( or ink) in my printer to print off thewhole manual :) Sanjays videos gave this old dog a chance to learn a few new tricks , I use mine live in a band to play sequences and also use it in pad mode to play Bongos and claps ,thanks Sanjay
You’re welcome! Glad you found it useful!
Another great Mikro Mk3 tutorial video.
I never usually comment, but your videos are absolutely amazing. Such a great start to what I want to create! Thank you!
🔥 The Covenant lives!
Great tutorial, thank you so much!
Thank you for explaining the steps so clearly. Great job!
Thank you so much for these tutorials because I was wrecking my brain❤❤
Hypnotic groove and excellent tutorial 👌
Thank you 🙌
Thank you so much for these! Made it so easy! It's a process learning a whole new DAW. Very different from FL studio
You're welcome. Glad you found it helpful.
Once again, another great informative video.
Thanks!
Sanjay, your content is gold! Thanks for all that effort you're putting in here!
Glad you enjoy it!
Thanks Sanjay!
I can't thank you enough. This video is easy to follow and makes sense for a beginner like me. 😍
Awesome! So happy to hear that!
Fantastic tutorial man, thanks so much. For a guy that's been playing mostly guitar and old fashioned keyboards most of his life, the Mikro is a bit of a daunting interface. This was a great way to get familiar with the basic functions of it and start to understand the concepts of groups and scenes in Maschine. Cheers!
Its always good to learn a new device - it changes your perspective on making music. Glad you found my tutorials useful!
best tut on this thing anywhere.
Thanks!
So much good informations and perfect tutos. Greats videos. Thx to you.
Thanks Sebastien!
Thank You for one of the best tutorial on CZcams!!
You're very welcome!
Extremely helpful, Thank you!
Glad it was helpful!
Excellent videos. Thanks!
👍🏼
Beautifully done. Great tutorial.
Thanks!
@@SanjayC , I am going to get the Mikro MK3.
Digging the chillout lounge vibe! :)
Thanks!
Thank you frm the bottom of my heart. U made such terrifying machine look user friendly. Inspired me to make the music i like. Gbu
Loving it! Thank you so much!
Love to hear that!
Very easy to follow you!
Thanks!
You are so underrated. I swear, you should have so many more subscribers.
You're too kind. But I'm glad when someone who needs my videos, finds me. :-)
your tutorials are life right now for me....quick simple and easy to follow....NI shlda paid you to make their official ones!
Hi!
I am French and your tutorial are so good! You help me to win lot of time! Thank you man, really easy to understand!
Keep Going!!
Merci! Aussi, I am translating my new videos into French!
I can't thank you enough.
just woow
Thanks a lot for easy instruction ! You are great 👍
Thanks!
Yes! keep it up!
Will do! More coming!
thanks for your tutorials man, been really helpfull
You're very welcome. I'll create some new ones very soon
Great video Sanjay!
Thanks! :-)
Many thanks!
You're welcome!
Thank you so much for these tutorials. So clean and easy to follow. Subscribed faster than lightning
Thanks for the sub! Glad you found these helpful!
I finally get it now. (Bow down) Thank you for your tutorials. Really, really appreciative of them.
You’re welcome. Thanks for the awesome comment!
I've subbed (obviously) and not new to beat making at all, meaning I don't need my hand held through the beginner stuff. but psuedo new to maschine. What is the best way to get ahold of you to pick your brain regarding? If need be you can email direct at serious@cyberdude.com.
Cool video series I’ve had an MK2 for years but never got around to figuring it out properly
best Manual bro! Спасибо
Thanks!
Sanjay, thank you so much for providing this concise explanation and example of song arrangement. I have been looking for an easy to understand breakdown of this, and yours succeeded with flying colors. Live long and prosper, my friend.
You're very welcome! :-)
Ok, thanks for this! I has having a hard time with scenes but it all makes sense now.
Awesome! It takes a few times learning those terms, but once you get it...its all good from there! :-)
Thank you Sanjay for doing these!! Really clear and helpful breakdown, been looking for my first proper midi controller/sequencer and the Mikro mk3 is a top contender.
Glad it was helpful!
Thank you 🙏🏻
You're welcome! 🙏
I appreciate you Sanjay C! I'm using my Maschine more, and my keyboard less! Thanks again Sir
Thanks a lot Mate
You're welcome!
your're
the man!
No, YOU the man! 🤜🏽
Good tutorial well explained.
Thanks JerZboy!
Nice Namm footage too
Thanks man
You are at least twice better even that the native instruments tutorials themselves. Thank you very much for sharing
Glad you like them!
check point !
Thanks pls more videos
I need a Maschine to follow along with these tutorials! Also ❤ Halo...
Yes you do!
Very helpful! The N.I. tutorials suck! Yours rock!
This looks fun, I was this machine too, haha!
You need one!
Can u do the same tutorials about native midi controllers s series please?? Love the style of your exploring
Oh man...I wish I had the S series. If I get my hands on one, I'll do that for sure. Just a matter of time.
I seriously appreciate this, I'm having a lot of fun! don't stop!! if I can add one thing, I use an mk2, so I don't have as many hardware features as you do, maybe you could show how to add stuff with the software? thank you so much.
I'll try to do that more in the future.
@@SanjayC the man himself! Thank you!
Dope tutorials Sanjay! Happy New Year as well! I've been using the Maschine for years and I still picked up a few new tips from watching these. I would love to see videos on your whole process of using Ableton after you've exported these tracks from the Maschine software. I'm pretty new to Ableton Live 10, so this would be really helpful.
Thanks, John! Happy New Year! I need to an Ableton+Maschine video. Will get to that soon.
Sanjay C That would be cool. I look forward to seeing those whenever you have a chance to make them.
Fkn dope vids man. Thanks! Would you be able to offer up advice on how to arrange in more detail? I get stuck trying to put down multiple scenes
I’ll try to do a vid on that
big up
Great series! Might sell my LaunchPad X and get a Machine Mikro.
I think you'll love it. Thanks!
really great tutorial! can you also import stems/audiofiles in the Maschine software as a scene? That way you could really use it in a live setting!
i love your video tutorial!! Thank you for making an awesome videos! I'm learning so fast.
Sweet!! Glad its helping you out!
Wow...that is one POWERFUL piece of kit...amazing what we get for our money now a days...imagine recording all this stuff in the 70s or 80s....thousands and thousands of dollars just for some ordinary sounding synths...that even before you pressed record on your super expensive tape recorder...got it wrong? Tape goes to garbage, buy new one..
That’s the truth!! No excuse not to make good music at home these days!!
@@SanjayC amen dude, thanks for the videos, top quality stuff man
🙏🏽 thanks!
Hi! Thank you very much for your tutorials. It is too good. I've learnt the basics now. Cool. I have a query. In one of my projects the touch strip is not working properly. Particularly the beatecho mode. May I know why please.
man's a fuckin legend
damnnnn 1:17 thOSE 2 chords, I wanted to hear that made into a beat!
Do it! Need a trap beat under it!
Please make a tutorial for how to using Maschine mikro into GarageBand. Thanks in advance 🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼🙏🏼
Oh man...that's not an easy thing to do. I wish there was an elegant solution.
@@SanjayC
It's ok. Please please reply my question. I know I can make loops in Machine and drag them into Garageband but I need to record live from my Maschine and record that audio exactly you have recorded. How you done that ? In which DAW you have recorded and is it possible in Garageband ? I have tried but nothing recorded. Maschine is not showing up in input device in Garageband. I have no other DAW apart from Garageband. Please suggest how I can record live from Maschine Mikro MK3 if possible?
Thanks so much Sanjay for a great series! Do you have this uploaded to Soundcloud or anywhere? I love this beats you created.
No I haven't..hmm...maybe I should. But its really short :-/
🔥🔥🔥🔥🔥🎶
Can you do a video about integrating maschine with fl
So how would you get more effects to choose from? I see my list of effects but theres no echo effect and I'd like to have one there. How would you do that?
Aha another key reason to use the step sequencer - to easily make variations
So can you record with your filter live on the touch strip or is it just for performance
When performing, how do you make it start, say SCENE 2, after SCENE 1, without having to click exactly at the end of SCENE 1?
Is there a way to change the view from the scene overview to the standard overview with the patterns and groups? on the old Mk2 there was a extra button "navigation". On the new one it doesn't works
Hello I love your tutorials and learn so much by following the steps you take! I have a problem , its not possible to right click to append a scene. Could you please help? What am could i be doing wrong?
Hmmm...I'm not sure. There could be another way to append a scene. Try the + button
Is there a way to record performance mode in Maschine? Ive been trying to and can figure it out
great video can you pet that Banshee for me too?
LOL! Are you the Covenant!?
Trying to right click on my Mac laptop at the 5:00 minute mark and it’s not letting me do it the Plus sign keeps disappearing when I try to right click
Do we need to mix after we are done arranging?
Always good to. You can do it in the software.
If I made a beat that's like 5 bars how do I make it the length I want..if I export it its only like 9 seconds long.
Your 4 tutorials on the MASCHINE MIKRO MK3 is absolutely amazing, I'm just one week old on my Mikro mk3 and a beginner into productions. I have watched Pt 1-3 for over 20 times now, in your next tutorials slow down the pace please, I'm suggesting i mean no harm please. More greez to your elbows SANJAY C.
You mentioned about when someone has no knowledge of KEYNOTES(someone without music theory) so that way is to use the C1 or C2? Its not clear to me,Thanks.
Good feedback. C1 or C2 doesn't matter. you can use either one. I'm glad you liked the tutorials.
Love your videos 💜. 1 question, how u record from the MacBook screen???
I use QuickTime. Just open Quicktime and then from the top bar menu, select Screen Recording. Boom! :-)
it will record with audio?
Any tips on using the Mikro with the Komplete Kontrol S61 mk2? I have seen a lot of videos about using the full version of MK3 with KK keyboard, but nothing about using the mikro. Also wondering about using Mikro with my Push 2. I see plenty of "VS" with these two but not too many using them together. Thanks.
Good questions. First, i think the Mikro and any NI keyboard is an excellent pairing, because you get the best (most complete) control of NI software. Mikro doesn't control Komplete Kontrol software as well as the NI keyboards do. Second, if you're using Ableton Live, Maschine will run on a track inside of it. Which means, the Push 2, will only control the stuff outside the Maschine track. If you're creating a beat using Maschine inside Ableton, you are controlling that universe within that one track only. Honestly, I use Maschine inside Ableton simple to get easy access to the excellent drum/sample kits that NI has to offer in Maschine. The control of the rest of the song, is much more comprehensive with the Push 2. The reason you probably don't see other videos showing the pairing of the two devices is because in my opinion, they are no complimentary - they are independent of each other.
I see that the change of scenes is immediately. Could be automated like it is by default in Ableton Live to change it at the end of the pattern? I am an Ableton live producer and I am so used to the Ableton workflow but I am tired and I need some inspiration. I am thinking in moving to Maschine universe but there are some things in it workflow that makes me doubt.
You can arrange it into a song and then arrange the song into the scenes/patterns you want to automatically play next. Its not the same as how you do it in Ableton
is it possible to release the music as your own for example on spiffy or Soundcloud?
Yes for sure. You can use samples and drum kits and then release it wherever.
This is basically an ableton workflow
how can I keep the metronome on when it's recording?
Press Shift+Tap/Metro. The metronome will stay on until you hit that again!
What version of Maschine are you using? When i create a new scene my pattern doesn't transfer over like yours does.
I’m using the latest version. You?
@@SanjayC I figured it out! Thanks for being responsive. I am really finding these tutorials to be the best for the Mikro III
Very good tutorials broth, but please talk more slowly please, because my English is very very bad. I am Majo Rodek Dj from Css-Venezuela But now live in Madrid Spain.
I will keep that in mind for the next videos!
you think the Mikro is good for beginners ?
For sure. Its fun and inspiring.