That's awesome! Maybe we can now just have that fitting at the rear of the van and just add the tank when needed instead of trying to find a suitable spot for the tank on the Jayco Expanda
Great video! Quick question: when you're using the quick disconnect each time you have to fill up and reconnect, does it get air pockets? If so, does your diesel heater interface throw an error?
1. Any link to the fuel line quick disconnect? What side does it have to be for the chinese diesel heater, will be buying the 5 KW version. 2. Any air bubbles foring in the line when reconnecting the line?
I'm thinking of doing the same thing with my diesel heater. Do you have a link for the quick disconnect you installed or remember the size needed? Thanks!
Older comment but yes you can, but if the seal fails it empties the contents into the vehicle. Using the standpipe is a better option if you can use one.
Old post but a lot of the cased units have the tank on the top. The only thing on my mind is that it may self syphon if the pump fails and allows air into the system. I just keep the pump to heater hose as short as possible.
Hi there, Great lot of videos. I am about to install one of these heaters in our motorhome but I am fitting the tank with a "breather-non return valve" as used in motor cross bike tanks. They let air in but in the event of a fall don't let the fuel out. I believe this will be MUCH more convenient than having to go and open the lid each time you use the heater especially when the tank is outside or in a difficult to get to place. I will let anyone know how it all goes if you are interested. Graham R. South Australia
Have you had any luck with those plastic disconnects? I bought two sets and both plugged up on me within an hour use. Either plugged up or malfunctioned. Pulled the lines off both ends and cannot blow air through them when connected.
Huge improvement to your fuel tank. I wish the disconnect had been available when I spent too much money for my marine fuel tank.
Excellent video! I love your thoughtful methodical approach and explanations!
That's awesome! Maybe we can now just have that fitting at the rear of the van and just add the tank when needed instead of trying to find a suitable spot for the tank on the Jayco Expanda
Great idea!
It is a good plan to purchase 2 so you have a back up, the first unit stopped working for me and I had to switch out for the second one.
Ty for your video. I liked the quick connect pieces, no mess. :)
Shame I can only find it in Australia?!?
This was helpful 😉👍
Great idea! Thanks for the video!
Great video👍🇬🇧
Nice one thanks
Legend thank you
No problemo Shawn!
Thank you!
Great video! Quick question: when you're using the quick disconnect each time you have to fill up and reconnect, does it get air pockets? If so, does your diesel heater interface throw an error?
Hi mate, a small air pocket on the tank-side... not enough to impact things
1. Any link to the fuel line quick disconnect? What side does it have to be for the chinese diesel heater, will be buying the 5 KW version.
2. Any air bubbles foring in the line when reconnecting the line?
Good video, how does that tank vent, or do you just loosen the cap to prevent vacuum when drawing diesel?
Yep, I just loosen the lid slightly when in use
brillant ! thank you !!
can you confirm the size of the quick connect pls, cheers Frank
Is there a vent? Thx!
Have you got a link for the kit I can’t seem to find them
Can you install two qiuck disconnects in the same fuel line run? Want one at the fuel tank and the second at the self containing chinese heater.
Any idea if this so called quick connect is fuel rated? Looks like one for water
Hi mate, they're made and supplied by a diesel heater company... so I assumed yes?! Haven't failed in the year or two I've been running them
Love this! You've not had any issues with air in the system every time you disconnect to refuel. Do you have to reprime?
Hey mate, no, luckily it has valves in it to keep the fuel in the lines
Hi nice and helpful video thanks , where abouts did u actually install your heater, in your swan ? I am just about to install one in mine cheers
Thank you! Here’s where I installed it: abigpeacheyadventure.com.au/diesel-heater-installation/
I'm thinking of doing the same thing with my diesel heater. Do you have a link for the quick disconnect you installed or remember the size needed? Thanks!
Hi there, the link to the quick disconnect is in here: abigpeacheyadventure.com.au/diesel-heater-quick-disconnect/
@@abigpeacheyadventure this website does not seem to work
@@sunnyshah5884 Hi Sunny, just checked and seems to be okay... please try again
Whats the purpose of the Air Diesel Parking Heater Oil Extractor Fuel Tank Sender Standpipe Pipe? Can't you just tap the bottom of the tank instead?
Older comment but yes you can, but if the seal fails it empties the contents into the vehicle. Using the standpipe is a better option if you can use one.
In the manual it says fuel tank should be below the heater level. Is that essential? Or will it eventuallly generate erroe. Odea.
Old post but a lot of the cased units have the tank on the top. The only thing on my mind is that it may self syphon if the pump fails and allows air into the system. I just keep the pump to heater hose as short as possible.
Where is your breather? Or to you just crack the lid when you use the heater?
Yep, just crack the lid during use (it’s got the second breather cap on the other side)
Hi there, Great lot of videos. I am about to install one of these heaters in our motorhome but I am fitting the tank with a "breather-non return valve" as used in motor cross bike tanks. They let air in but in the event of a fall don't let the fuel out. I believe this will be MUCH more convenient than having to go and open the lid each time you use the heater especially when the tank is outside or in a difficult to get to place. I will let anyone know how it all goes if you are interested. Graham R. South Australia
@@GR-dq2uj do you have a link for what you purchased? Interested.
@@GR-dq2uj Yes, interested - update please?
Does it leak at all when you disconnect?
Hey Jacob, not at all - both sides of the fitting are valved, so it doesn’t leak from either side (and maintains its prime too)
Does the quick connect leak? Does it have no bends in it, otherwise it will leak?
Hi, no it doesn't - it has valves in each side
Have you had any luck with those plastic disconnects? I bought two sets and both plugged up on me within an hour use. Either plugged up or malfunctioned. Pulled the lines off both ends and cannot blow air through them when connected.
Hi, I've had mine for a couple of years now and they're still going strong
@@abigpeacheyadventure thanks. I hesitate to buy them again but man the metal ones are so expensive.
Does the pump pull the diesel through the line, I thought it was gravity fed, I'm just on with this at the moment.
It pulls it through with the dose-meter pump
Hi wich size of your connect bought on eBay? Thanks a lot
Hi there, the link to the correct size quick disconnect is in here: abigpeacheyadventure.com.au/diesel-heater-quick-disconnect/
Hi.I can't seem to find the link for the quick disconnect kit.
Hi Max, the link to the quick disconnect is in here: abigpeacheyadventure.com.au/diesel-heater-quick-disconnect/
@@abigpeacheyadventure Unfortunately, the actual site where you purchased is no longer listed.
i dont know if it is legal to modify fuel cans you may want to check with the laws.