HOW TO REPLACE WORN OR BROKEN EXHAUST MOUNTS!
Vložit
- čas přidán 7. 09. 2024
- Did Your Exhaust Suddenly Start Rattling? It’s Probably Worn Exhaust Hangers! Join our Community of DIY'ers: / everythingdiy Follow us on Facebook for More DIY Goodness: / e.doityourself
Follow us on Twitter! / everything_diy
Check out our Pictures on Instagram! / e_diy
Parts:
Torque Solutions Universal Exhaust Hangers
- 3 x 12mm hangers
- 2 x 10mm hangers
- 1 x 12mm twisting hanger
Tools Used:
- Razor Blade
- Grease
- Pry Bar
The DIY Rep in this Video is Ally!
To send letters, products for review/use, other correspondence - please use this address:
everythingdiy
P.O. Box 186
Pasadena, CA 91102
FTC Disclaimer:
All products mentioned were purchased by us. None of the companies mentioned are paying us for this video. All opinions are our own.
Other Disclaimers- Everything you do is at your own risk. Everything DIY or its affiliates are not responsible for any personal injury or property damages incurred.
*SAFETY FIRST EVERY TIME* - Auta a dopravní prostředky
God Damnit I really thought she wouldn't mention "that was she said" when she was talking about how stiff the mounts are! xD
Great tutorial, I think everybody is proud to see a girl doing mechanical work like you do, keep the good work 👌. By the way I couldn't find anywhere how to replace a mitsubishi lancer 2008 2.0 engine mounts 😅.
good job on the install. I put these hangers on my speed3, and it was a pain. I didn't cut the old hangers in case I wanted to reuse them.
I have been trying to figure out why my mazda was making that rattle noise! You saved my car thanks ☺️
working on cars is in my soul .... i always love to fix car..... great job
@2:49 That had me cracking up laughing lol. Great video! You were definitely right... Installing these things are a pain in the ass, but it's better than that annoying exhaust rattle.
I could see someone easily slicing their finger open trying to cut a hanger off. much easier method is to pull down the exhaust and spray some wd-40 in the hanger and it wil slide right off.
.I like the video. You could put a little dish detergent to make the rubber slip over the hanger, which also works great for radiator hoses, where you don't want them greasy.
If I were a woman, I think I might find it insulting when people write things like "It's cool to see a girl working on cars." Actually that might be two insults in one. First of all, it implies that the majority of women are incapable of working on cars.
Second, and I'm not 100% sure about this one, but I think some adult women may find it insulting to be referred to as a "girl". I think that depends on the woman's age as to whether or not it's a little offensive.
I am an adult male and I would prefer not to be referred to as a boy. But honestly, I don't really care because I don't offend easily but it seems like some people do.
Great job on the video. I am not going to lie, most of the time I cut off exhaust hangers as well, if I have ones to replace them with. The only reason I may have "extra" ones though is because a few times, I didn't cut them off and so I saved them for future use. Thanks for posting.
Thank you for posting this video. I like your method of cutting the rubber muffler hanger out.
That was the sexiest exhaust mount replacement ever. Bwahahaha!!!
Do not use a petroleum based lube, which deteriorates rubber. Use silicone based lubes. A rubber compatable anti-seize will work also.
Always lube before sticking the pointy bit into the hole, it slides in and out of the stiff mount so much easier.
Spray silicone lubricant works great on hangers and radiator/heater hoses.
Nice. You're always the reason i Open CZcams at least once a day to check for a New Video 😃👍🏻 greetings from Düsseldorf, Germany
Lubing up is always better than pushing in dry 🤣
Bite the pillow I am going in dry🤣
I haaaaaaaaaate replacing hangers haha, such a simple job but such a pain in the arse to do. A bit of silicone spray or silicone grease is best when rubber is involved, you probably already knew and like me just use what ya got! Great vid and thanks for not editing out how frustrating it gets replacing hangers with no hoist available :)
One may want to invest in a Exhaust Hanger Removal Tool aka Exhaust Hanger and Rubber Bracket Separation Exhaust Pliers. Just a thought.
DIY out of Nowhere! Awwwww Yissssss
Happy Monday!
Thank you. I need to do install those on my 2004 Dodge Ram Truck. Very well done.
thx for putting the size so people like me can shop around for the best deal!
Super!!!! I'm so glad I found u 💓
Lube is good!! ❤️
As always, good stuff Ally! Keep up the great work and awesome viddys....
You've got to lube those shafts so they slide easier into those tight holes. It makes the job much more satisfying.
Thank you.
Two thumbs up for that's what she said joke !
So what's up with the turbo upgrade is it happening you guys lol ? I pretty much have all supporting mods for it just need the turbo bnrs4 ftw
if you put the rubber mounts on the part you are installing makes it easier
yeah great vid - just an idea - use a single edge blade or carpet knife when cutting that rubber - i was waiting for that cheap blade to break on ya!! wouldn't want to see anyone cut!!
😀"What she said" Yep. Might use a non petroleum based lube on the mount holes (dish detergent) to help it slip in !
These are hella hard to install lol now I’m waiting on new gaskets to finish this job
I replaced my side and rear motor mounts today! watching your videos definitely helped! =) there's so much I wanna do to my mazda! is there any way to perhaps ask for advice from you?
Annnd, it's beer time!
Or you could have a 3" downpipe, a 3" midpipe from Ultimate Racing, then a custom Magnaflow 14419 placed before the axle and custom 3" piping over the control-arm and out the left-exit (driver's side) only. Single-exit tuned look FTW! Lighter, less complicated, sounds better than any other system I've ever heard, and solid metal hangers were welded between my piping and frame. It's so strong that I can literally stand on my exhaust tip and it doesn't move at all.
They make a hanger removal tool that costs 20 dollars works like champ. Right off with one squeeze.
try penetrating oil next time, you can get on and off the rubber mount in 10sec
Use a silicon lube rather than grease. Grease will decompose the rubber mounts.
Buy an exhaust hanger removal tool. The proper tool makes the job so much easier and quicker!
Try lubing the rubber first.
It''s a lot easier to use lube when removing them and putting the new ones on....
aww, it would've been easier to apply silicone grease on the new hangers-- it just slips right in! (that's what she said)
K-y works wonderfull😂
hy..
thats what u said lol you funny ima subscribe
Would have fitted it to the bottom one first. Much more room
ad some soap liquid or wd40 saves cutting a finger...
Made me feel a bit queezy when you were cutting toward your other hand 🤢
I like you.
Haha yeah thats what she said lol
Dont try going in dry ! use some lube hunny
"That's what she said", Ha!
That's what she said?
Funny video......
silicone spray will make it wayyyy easier
warm water
wow your car looks brand new underneath. Mine's rusting away :(
Beautiful girl beautiful car
Thats what she said lol
Need me a woman like you who knows these kinda thinks but one thing you messing up on. Safety first. No gloves. Cutting with razor
Are you half drunk or is that normal?
She is sooooo hot
I saw a girl who looks like her working at McDonald's today.