That sounded really nice! Love that wolf 🐺 growl from a V6 exhaust. GM’s 3.8 L Series 1 and II engines were great from all aspects. Thanks for sharing and I hope everyone has a great weekend ✌️
James Hott 98! It's not bad for a 19 year old car lol 80k miles and very little rust, which is a biggie in NEPA. And yea, it beats his rusted out Subaru. I'll miss the camaro though. It was nice seeing people-oriented around for it even though it was only a V6
Did you need any special clamps, reducer on anything else to put it on ? I'm looking to do exactly this on my 98 V6 3.8. I love the sound ! I think the part # is either 42583 or 842583, right ?
Yannick Marcoux I had my dad machine a 1/4 inch spacer with a thin piece of metal off the back spacer. So after that all I had to do is slide everything on and use regular exhaust clamps. If you have a welder you can just use a spacer without the thin metal off the back. For the two pipes out the back I just bought to 90 elbows and and two straight pieces to go out the back but I believe you can get a 90 thats longer on one side that'll work. And thanks man! I'll have to check for the part number when I get home.
Yannick Marcoux 42583 and 842583 are the same mufler pretty much just 842583 is stainless and 1/4 inch less width than 42583 and 42583 is aluminized steel but any way mine is 42583
I see ! Thanks a lot ! I was thinking of using the Z28 tail pipes with 2.25 to 2.5 adapters but I will try to find 1/4 inch spacer like you have (if it exists). If not, then adapters is goes I guess ! Thanks again !
Jampee Saenthongkham It cost me about 130 for the regular metal one but I'd recommend the stainless for a few more bucks. and I got mine from advanced auto.
Jampee Saenthongkham just the muffler on stock exhaust. You'll want to get the mufler part number 42583 or 842583 one's stanless the other is steal. Two 90 elbows and two pipes to go out the back 5 or 6 exhuast clamps and you'll need to make a quarter inch spacer or find a v6 to Z28 pipe. I just had my dad make a spacer for the mufler.
Gotta love that 3800 V6. That is one of the best engines ever made!
No kidding! I’m buying one with 314,000 miles on it. Runs like a dream!
Bullet proof it is
@@Foxfloop is this a meme? Lol or fact? I have one sitting with 170k
@@just_2swift dead serious. 96 Rs camaro.
@@Foxfloop wow I was thinking about selling it but ima keep it. Do you know anything that would amp the hp? Outside of ls1 swapping
After watching this I just bought an 80 series for my 97. Thanks!
That sounded really nice! Love that wolf 🐺 growl from a V6 exhaust. GM’s 3.8 L Series 1 and II engines were great from all aspects. Thanks for sharing and I hope everyone has a great weekend ✌️
I’ve been looking for an exhaust like this for a while on my 3800 ‘02. This sounds amazing!!
Just got mine put on, went with the 80 bc of this video. Looks identical
Do you have a link on for the exhaust wanna put this on my 97
That's pretty good sounding v6 tbh
Making me miss my Firebird. 👍
your car is beautiful 😍
Thanks!
They sound so much better in person
Nah
Missing your right now ❤ (at the shop) 🤧
I have a 1990 Oldsmobile Delta 88 Royale Brougham with FE3, Series 1 3800. Im currently looking for an exhaust system
Will this sound that much different to a 2010 V6 Camaro?
Yes
Completely different engine series
Almost sounds like its a straight through exhaust.
I got an 80 series for mine and wanted to see if it sounded good and GAAAAAAAAAAAAAAAAAWWWWWWWD DAAAAAAAAAAAMN thats nice
i wanna get this muffler for my 2004 grand prix
A good quality resonator will take the raspy drone away!
this a muffler delete and resonator ? or just resonator
Borlas don’t drone. Wouldn’t a borla be a better exhaust than a series 80 flowmaster
anyone know how to make the muffler sound like that? new headers?
I have a buddy who had a 4th gen V6 that I thought was a V8, this is the type of exhaust he probably had
Are these straight piped all the way back?
it has all the stock piping until the muffler then a 90 out of the muffler on each side then a piece of straight pipe to the stainless tips
Where's the Camaro?
Was this a 3 inch or 2.5 piping?
Is it louder without the flow master or no??
How much horsepower does it add
Wht size tips are those? You think it makes a difference?
They are 22 inch stainless tips and I believe it’s 2 1/2 inch end and 3 inch out. And I’m not sure if that would make a difference or not.
is this the American thunder exhaust system? or is it just the muffler?
I've been planning on getting something for my V6 since the current muffler has a small hole
PJV Music It's just the muffler every thing else is stock.
James Hott I ended up getting a Mustang GT. but thank you, may end up giving the camaro to my brother lol
PJV Music cool! what year? Its no problem. Yeah I'm sure he'd have fun with it lol there fun cars👍
James Hott 98! It's not bad for a 19 year old car lol 80k miles and very little rust, which is a biggie in NEPA. And yea, it beats his rusted out Subaru. I'll miss the camaro though. It was nice seeing people-oriented around for it even though it was only a V6
Did you need any special clamps, reducer on anything else to put it on ? I'm looking to do exactly this on my 98 V6 3.8. I love the sound ! I think the part # is either 42583 or 842583, right ?
Yannick Marcoux I had my dad machine a 1/4 inch spacer with a thin piece of metal off the back spacer. So after that all I had to do is slide everything on and use regular exhaust clamps. If you have a welder you can just use a spacer without the thin metal off the back. For the two pipes out the back I just bought to 90 elbows and and two straight pieces to go out the back but I believe you can get a 90 thats longer on one side that'll work. And thanks man! I'll have to check for the part number when I get home.
Yannick Marcoux 42583 and 842583 are the same mufler pretty much just 842583 is stainless and 1/4 inch less width than 42583 and 42583 is aluminized steel but any way mine is 42583
I see ! Thanks a lot ! I was thinking of using the Z28 tail pipes with 2.25 to 2.5 adapters but I will try to find 1/4 inch spacer like you have (if it exists). If not, then adapters is goes I guess ! Thanks again !
Thanks for the part numbers. I was looking at the right one then.
Yannick Marcoux No problem man! And okay cool! Good luck finding what you need!
Sounds like my aunties old Lumina with a hole in the exhaust 😐
Exhaust tip size?
They are 22 inch stainless tips I believe 2 1/2 inch in and 3 inch out I bought them from summit racing
Dude I have a 98 3.8, how much this cost u? Where to buy?
Jampee Saenthongkham It cost me about 130 for the regular metal one but I'd recommend the stainless for a few more bucks. and I got mine from advanced auto.
James Hott what is the name of it
Jampee Saenthongkham it's a flowmaster 80 series.
@@jameshott9484 is this the exhaust or just the muffler? Wht do I need to order or tell them i need?
Jampee Saenthongkham just the muffler on stock exhaust. You'll want to get the mufler part number 42583 or 842583 one's stanless the other is steal. Two 90 elbows and two pipes to go out the back 5 or 6 exhuast clamps and you'll need to make a quarter inch spacer or find a v6 to Z28 pipe. I just had my dad make a spacer for the mufler.
cool les pubs tu te fais du biff
What kind of cat?
Stock cat
I have this on my v8 and it sounds meaner than a junkyard dog. V6 is just a higher sound
factory cat? I have a cheap high flow on mine and mine has way more rasp. I don't like the rasp sound. I have a video on here
Yeah it's just the stock cat. I watched your video does sound a little more raspy
When I get it back from the shop I want to make a video of what it sounds like driving it