Jewelry Box for a Super Hero - Box Making How-To with Step by Step Build Plans
Vložit
- čas přidán 17. 04. 2021
- Support What We Do at The Katz-Moses Store lddy.no/stih
In today’s woodworking build we’re making a White Oak and Wenge Jewelry Box. Boxes are a right of passage for woodworkers. Due to the low cost of materials, they’re phenomenal projects to practice some high level skills while the stakes are low. They make fantastic gifts and the creative possibilities are endless. I walk you through grain wrapping to make it look like one continuous board, fitting/making trays, adding felt, and getting a high quality smooth finish with grain filler, shellac, lacquer and wax. The lid design is inspired by Matt Kenney @mekwoodworks who is the reason I got into woodworking years ago. Let me know what you’d like to see next. Thanks for watching! Please like, comment and subscribe. Cheers!
----
Support What We Do at The Katz-Moses Store lddy.no/stih
Step by Step Build Plans kmtools.com/collections/plans...
Matt Kenney @MEKwoodworks on Instagram / mekwoodworks
Timbermate Wood Filler amzn.to/3uXeGTq
4 Creative Ways to Make Miter Splines Video • 4 Creative Ways to Mak...
The writing on my cross cut sled roughly says (sorry thought we’d have a clear shot of it but didn’t) “Zero Clearance Spoils Board so I know exactly where the kerf is to place the corner for the miters”
----
Buy the Katz-Moses Magnetic Dovetail Jig: lddy.no/stiz
Taytools is my favorite woodworking tool source: lddy.no/e90a
I have Walnut Slabs for sale: lddy.no/stj0
Buy the Katz-Moses Stop Block : lddy.no/stih
BitsBits is the BEST place to buy router bits: bit.ly/BitsBits USE CODE JKATZMOSES15 for 15% off
Total Boat Epoxy: bit.ly/2I3Q8m4 10% Discount code JKATZMO
----
Essential Woodworking Skills Playlist: • Essential Woodworking ...
----
Woodworking Routers Video Playlist: • DIY Router Table Build...
----
Woodworking Joint of the Week Playlist: • Woodworking Joint of t...
----
Woodworking in SLOW MOTION Playlist:
• Slow Motion Woodworkin...
----
Tool Tune Up Thursday Playlist: • Tool Tune Up Thursday
----
Check me out on social media:
jkatzmoses
www.Facebook.com/katzmoseswoodworking
patreon.com/katzmoseswoodworking
/ katzmoseswoodworkingshop
----
Tools I love:
My Apron: lddy.no/stir
My favorite Dozuki dovetail saw - bit.ly/SuizanSaws
My favorite Ryoba saw - bit.ly/SuizanSaws
Marking Gauge: amzn.to/2nlXLuQ
Marking Knife: amzn.to/2nm39Ok
NEW Suizan Flush Trim Saw: bit.ly/SuizanSaws
Stanley Sweetheart Chisels: amzn.to/2mVMTkF
Knew Concepts Fret Saw: amzn.to/2FUDbYZ
Dewalt Planer Package: amzn.to/2thEf6O
Forrest 10” Combo Blade: amzn.to/2Fdaee3
Festool Tape Measure: amzn.to/2oS3cjD
Starrett 6” Combination Square: amzn.to/2oP3dVw
Woodstock 3 in 1 Shoulder Plane: amzn.to/2FgAS1A
Stanley Low Angle Jack Plane: amzn.to/2oV4I4O
Dewaxed Shellac Flakes: amzn.to/2FeqqYh
Abalone Inlay :amzn.to/2rjMTxe
Abalone Inlay Alternate: goo.gl/DHonFy
5 Minute Epoxy: amzn.to/2FijsSa
Triton 3 ¼ hp Router (with built in lift and edge guide incl): amzn.to/2LBw3Go
Kreg Router Plate: amzn.to/2A7oVNC
Triton Bushing Set: amzn.to/2A7pSpa
Bosch 1 HP Colt Router Set With Fixed and Plunge Base: amzn.to/2mHP1wY
Bosch Edge Guide: amzn.to/2uRRKs2
Bosch Bushings Set: amzn.to/2JUNRYb
Centering Cone: amzn.to/2OjgOAf
MY CNC MACHINES (I highly recommend both)
Bescutter Laser’s Website: bit.ly/bescutter
Avid CNCs of all shapes and sizes: bit.ly/3cdKdqA
----
Camera Gear:
Lumix GH5-s and main lens: amzn.to/2J49F7m
30mm Macro Lens: amzn.to/2GJXtTT
15mm Lens: amzn.to/2NafUox
50mm Lens I use for product shots: amzn.to/2mehs5y
Microphone: amzn.to/2IGjKIa
Lav Microphone: amzn.to/2Nb8SzY
Gimbal: amzn.to/2s9ZV0F
2nd CAMERA Canon 70d: amzn.to/2FiCEDq
Tripod: amzn.to/2HasNvK
Slider: amzn.to/2oNucSd
24MM Wide Angle/Macro Lens: amzn.to/2oSzzjh
50MM f/1.8 for those tight shots: amzn.to/2tpAoVm
10-18mm Lens for the wide shots: amzn.to/2FZrhNM
Musicbed SyncID:
MB015JWXUCTDINT - Jak na to + styl
*Support What We Do at The Katz-Moses Store* lddy.no/stih
*Step by Step Build Plans* kmtools.com/collections/plans/products/jewelry-box-build-plans
*Matt Kenney @MEKwoodworks on Instagram* instagram.com/mekwoodworks/
*Timbermate Wood Filler* amzn.to/3uXeGTq
The writing on my cross cut sled roughly says (sorry thought we’d have a clear shot of it but didn’t) “Zero Clearance Spoils Board so I know exactly where the kerf is to place the corner for the miters”
*4 Creative Ways to Make Miter Splines Video* czcams.com/video/w5wybH7TXwY/video.html
👍
@@mmmjd-usa ☺☺
i love the look you get when you finish something that you're really proud of it warms my heart to the core.
I know im asking the wrong place but does anyone know of a tool to get back into an instagram account??
I stupidly forgot the login password. I would appreciate any assistance you can offer me
@Eden Levi Instablaster =)
Great book for a beginner . czcams.com/users/postUgkxD-QRFQz730FJEh4f9BYSf-nkIMIC9hL_ this book really starts from the beginning, as in it explains what basic tools are and how to use them. But when it gets to the art of creating joints and how and when to use them this book really starts to teach you something. At least that was my experience.
Always a good day when Katz-Moses releases a video
Came to the comments to say the same exact thing.
I am very thankful for the czcams.com/users/postUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO that has been a tremendous help to me in building a perfect outdoor shed. I have been facing many challenges and difficulties for a long time, but this plan has guided me to correct the mistakes during the process. I am impressed by the projects and I express my gratitude to the creator of this collection of plans.
Jonathan, Jonathan, Jonathan! You never cease to amaze me… dude, your workmanship is over-the-top incredible! That box is absolutely gorgeous! I’m just starting to make six memory boxes for my children and my two best friends. They include a voice box and mini urn, (I have a terminal illness), so they can keep photos, letters, a share of my ashes, and I am recording messages for each one of them so they can hear my voice whenever they want to. I always try to do my best work, but you just inspired me to take it up to a whole new level. I’ve followed you for quite some time now, and always appreciate your teachings. The only thing I’m not sure about is how to wrap the thread so it never unravels, but Google is my friend, and I shall look it up, (I just love the handles). Thank you as always! - signed Tim, (a fellow woodworker, and friend you’ve never met). ☮️❤️
Such a beautiful box. Thanks so much for taking us along.
Just wow. What a great gift...
Gorgeous! Thank you for teaching us all your tricks.
Beautiful jewellery box. Great to see how much care you’ve put in.
This box looks amazing.
Beautiful!
That’s gorgeous.
Very glad this came out when it did. I have two boxes i'm planned, and this helps a lot.
Man, that feeling of pride in a project is such a high. It was great seeing you experience it. I'm brainstorming some trays that I think I'd like to build so that part was helpful for me personally, but I always enjoy your videos. Keep it up!
Absolutely beautiful work.
Absolutely gorgeous outcome on this custom masterpiece Jonathan! I couldn’t agree more on box making that it is truly a rite of passage. Your videos and training techniques are unmatched.. Thanks for keeping us long time woodworkers on our toes never being too old to learn a new process or technique. Many thanks and keep up the great work!
Beautiful little box here. Love how you did the end to end grain matching. I love white oak, even though a lot of people seem to prefer maple. And the contrast with the wenge is just perfect. I definitely need to start making some boxes. Thanks for the inspiration!
Beautiful. More of this!
Beautiful work. Thanks for posting.
Incredible!
That is absolutely gorgeous , love it. 👍
Absolutely beautiful box! Great video as well!!! Thank you for sharing (and teaching) Jonathan!
The way they slide right in there WOOOOOW! Love it!
It’s a good video when you receive a verbal gentleman, a non verbal look in place of gentleman and a blurred out section.
🤣🤣
@@katzmosestools my wife always asks why I am always laughing during your videos. She never gets it.
They never will hahaha
Facts! 😂
Wow! Amazing!
It is BEAUTIFUL!
Absolutely gorgeous box Jonathan. Lots of great tips there. I have never made any kind of high end boxes like this but I am definitely going to give that a try soon.
😲👍😎😃Well Done!!! Love The Wood Choice!!!! Thank You!!!!
Really nice box Jonathan! I love the bottom raised panel with the chamfer. It adds a ton of character and complements the handle and top.
Great looking box, J! I’m setting up to make some jewelry boxes for my daughters for Christmas, and I got some good ideas from this video. The continuous-grain wrap by using book-matched wood looks really, really cool... I was planning on dovetail joinery, but these splined meters look so good I am going to try it for at least one box. BTW, the “trick” of closing a miter gap with your burnishing tool is awesome! Thanks for the great content, again.
Very nice! The way that tray just floated downward was so damn satisfying
You are always inspiring. Great job and thanks for sharing.
Amazing job; thanks for the motivation!
Beautiful
Very nicely done. Thanks!!
WOW!!! That came out gorgeous Jonathan. Thanks for sharing this build and I also appreciate the way how to fix something that just wasn't right. Those are the tips that really help someone like myself learning how to master the skill. Thanks again! Felix
Beautiful.
You always make everything look so easy
Jonathan, that looks gorgeous!
So beautiful box 😍
Just starting to make Boxes...So good! Thank you for sharing.
Beautiful work Jonathan
Dude!!! You DA MAN !! Thank you
Awesome job! Thanks for sharing the learning moments.
Beautiful work. Thanks
I also love making boxes, and appreciate wenge.
That is an amazing box, I could only dream about making something as good as that.
That’s a very beautiful box, Jonathan and your presentation is excellent. Thanks so much for sharing!
Your humor cracks me up! Beautifully done!
THIS is sharp! Thanks much for sharing.
Love the way it just lightly fell into the other box.... complete wow moment for me
Beautiful!!! I am definitely inspired and motivated
Beautiful box!
Definitely will try with native chilean woods, thanks for all the wonderful videos you shared!
That is just an awesome box I’ve never seen anything like it you really bring the craft above and beyond thank you for everything you do serve
Beautiful piece.
18:15 had me rolling. 😂 Beautiful work, as always. I'm certain your friend will be thrilled to receive such a wonderful gift.
18:06 looked like he was pouring a beer before the blur at 18:15.
lol watched this again today for the first time in a while to get some inspiration and holy man was I lmao at this! @Jonathan Katz-Moses
It was so cool Jonathan. The oak and wenge is a great contrast. You just inspired me to build a box! Plus your videos are fantastic- lighting, edits, music. Well done again
Slowly building up a workshop to be able to make things like this. love your work man, and love your outlook on life
18:14 This is what makes these videos so fun to watch! Oh, and all the boxes! You are a box master! XD
When I saw your Instagram post about this box, I couldn't wait to watch the video. Now that I have, I'm inspired to try (key word) and make something that (hopefully) resembles it. This has got to be one of the coolest boxes around.
Enthusiasm is always refreshing. Interesting that you put the lining in edge to edge before installing the bottoms. Thanks for the video!
Stunningly gorgeous…
Amazing!! I’m not brand new to woodworking but a beautiful box like this is not something I’ve made. This has inspired me to do so!
Excellent work Jonathan! I am a box making junkie who really appreciates your high end work! The handle feature is awesome, too. Can't say enough about appreciating your skill, knowledge and info you share...Thanx and keep up the amazing work! I'll be watching!
Wow! Some really good tips Thank you!
The beauty of building boxes is that u work thru the entire process from wood selection to finish on a relative shorter period of time (compared to a dresser) and perfecting each of those steps.
Beautiful work, Jonathan! Really, REALLY well done!!! 😃
Stay safe there with your family! 🖖😊
lovely design
Awesome work Jonathan! 😃👍🏻👊🏻
Stunning work, Jonathan. Your friend, aka, The Super Hero, will love it. Great job as always.
Very cool !
Love it.
Thanks for throwing in that part about pricing, I've been making boxes for a little while now and I keep getting told that if I want to sell them they need to be under $100, but they also still need to be made from walnut with nice brass hardware...
People think HomeGoods is quality. They don't understand what it takes to make a box like this, in time, materials, and skill.
I have made a fair amount of custom humidors over the years. It's hard to compete with china but in the end people who can afford custom appreciate the quality. Fortunately most of my humidors have been gifts or for charity events so making a profit wasn't the goal.
I routinely make boxes for a specific purpose and sell them between 65-115$/box dependent on wood choice. If you can target an audience you can make good money on small boxes. Boxes that are built to be cute without an intended purpose are where it becomes a harder sell.
A friend of mine wanted 10 display boxes for her craft business. I quoted her $300. She hasn’t talked to me since.
@@terristroh3965 A guy I did work for on his house told me once if people want such a huge discount that they aren't your friends or family. At the end of the day we all want to get paid our fair worth.
Beautiful Piece Jonathan!
Wow, Jonathan, this box is "Poetry in Motion". Beautiful is an understatement.❤👍
Amazing as always! Great job brother!
Wow, impressive to say the least!
Jonathan - Outstanding workmanship. Very educational and I loved how the box looks. I plan on using many of your tips! Thank you for sharing your talents!
That is awesome.. I love how it looks so easy when you take things to ANOTHER level.. You always manage to demonstrate true and creative craftsmanship ! Respect!!
Magnificent piece of work - your friend will be delighted!
I love your enthusiasm and the box is a beauty. I think I’ll make one for the boss.
Wow that's all I can say. I can only aspire to making something as beautiful Jonathan. Jo and I love our aprons. Your friends from the UK 🇬🇧
Love this video and what a killer box.
Nice work. The end result is awesome.
18:14 love the Japanese "movie" touch on the clip. Well done humor.
Fantastic work as always, Jonathan!
I absolutely love the woodworking community. I am so incredibly grateful to be consistently exposed to such positive people and quality craftsmanship.
Beautiful work Johnathan!
I Love the handle!
THAT PISTON FIT THOUGH!
Beautiful box. I made my wife a bandsaw box using wenge and she loved it. (It was my first attempt, so it could certainly be better).
Beautiful box. The person who receives it will be blown away. 👍👍
Matt Kenney is a super star of box making!
Great piece of work!
Flippin gorgeous, dude!
Could not make it through this video without subscribing. That is absolutely beautiful sir and I love your how delivery. Be well
Maaaaan! The tray fit is absolutely 👌 beautiful work as always!
boxmaking is my favorite too. This content-free comment is here to drive up engagement numbers for my favorite channels. Thanks!
I'm just starting the small box rabbit hole. Love the build man..!
Good job, nice box!
Glad you’re thumb is healthy & healed.
Intended as a compliment: I love the mix of woodworking knowledge and montage that makes it feel kind of like a training montage from one of the Rocky movies. You just need to add a voice-over of Devito grumbling perplexing one-liners many to inspire you to cut cleaner in the style of a fight trainer.