Would like to see a planer board video! I’m just getting started on this catfishing stuff and I like making my own if Gods will. High five on the videos!
🤣 And some said i was crazy dragging 6 n 8 oz It didnt take us long to realise those lake weights dont work in river current When u start realizing ur dragging them up off bottom to high At .5 mph Cause force / current / float Wont hold it down Many many many cat guys arent realizing Your not on bottom Thnx Now do a vid On showing them on ur boat Ur bait isnt down 😁👍 Thnx for sharing
I really do appreciate it. Yeah I've ran into that several times of my baits floating up. We had to move heavier but couldn't find people that made them so I had to figure it out.
@@mickaburkhart14 I believe a short On how to chk if Ur baits up off bottom While on a drag Would help alota guys out there to see it We share it out just like this vid 😁👊👍 Enjoy ya content Tight lines my friend 👊
What a good, easy way to make those. I couldn't tell if they sealed watertight but a little squirt ofcheap caulking in each end of the tube would give a bit of flotation as well as the ramp effect. Enjoying your channel a lot.😊😊
Thank you. Yeah I've sealed them and not. Haven't seen a difference either way. The plastic seams to be buoyant enough. But sealing it definitely doesn't hurt.
Micka, What brand of sinker slides do you use to make your dragging weights? I use the Ez sinker slides, and they are green. The ones you were using looked to be black. Thanks
Looking forward to the planer board video You fished a toys for tots tournament last year. Will they have that again this year and if so do you have information on it. I would like to participate Thanks for your time
What size heat shrink did you say you were using? I have some 3/8ths but even with oil the air line would not go in. Thank you and I enjoy all your videos.
Thank you for that. Ok some 3/8 heat shrink are a tad smaller. I ran into that too. But I ordered some off of Amazon and it is just perfect. The brand is called electriduct.
Thank you sir, Appreciate you taking the time to answer questions. Does it get that fast on the cumberland at times. This my first summer fishing there. Fast as I've see sovl far was about 1.5mph Thanks again appreciate very much
@@jeffwhiteside1124 yeah it does get that fast on the Cumberland. But I still like to drag regardless lol. And don't have any problems answering questions. I love helping out where I can.
Like them can't wait to see how u make planer boards
Would like to see a planer board video! I’m just getting started on this catfishing stuff and I like making my own if Gods will. High five on the videos!
Thank you. I'll do the planner board video next.
Definitely want to see the planer boards please!
Will do. I'll start on that one here soon.
How to videos from one of the best catfishermen in the world. This is awesome, thanks for sharing.
I really appreciate that thank you.
Thanks for the video. Will be making those soon and looking forward to the planer board video.🎣
Thank you
Great video! Thanks for sharing, looking forward to the planer board video.
Thank you
Good how too video and yeah I'd like to see the planer board video. They can get expensive to buy. Thanks in advance
Thank you. I'm going to do that video next.
Thank you for sharing information. Not too many anglers are willing to do so these days! Much appreciated!
Absolutely no problem. I like to help others have the same success I've had.
Man brother, I can't wait to head out with ya next weekend. You got alot of knowledge lol. Thanks again for the opportunity.
Yes sir no problem.
Thanks for making this video!
Your welcome and thank you for watching.
That a great idea brother gonna make me some too
Thank you
Great video man! I was wondering how you do those. That whole method is pretty interesting. I to want to see your planer vid. 👍
Thank you and I'll do the planner boards next.
I am looking forward to the planer board video.
Well I hope you like it.
@mickaburkhart14 If it's as good as this one, Everyone will like it brother. Thanks for sharing yer knowledge.
Good video. Thanks!
I use cheap liquid hand soap to make the tubing slide into the heat shrink !
That's another really good idea. Thanks for that.
🤣
And some said i was crazy dragging 6 n 8 oz
It didnt take us long to realise those lake weights dont work in river current
When u start realizing ur dragging them up off bottom to high
At .5 mph
Cause force / current / float
Wont hold it down
Many many many cat guys arent realizing
Your not on bottom
Thnx
Now do a vid
On showing them on ur boat
Ur bait isnt down
😁👍
Thnx for sharing
I really do appreciate it. Yeah I've ran into that several times of my baits floating up. We had to move heavier but couldn't find people that made them so I had to figure it out.
@@mickaburkhart14
I believe a short
On how to chk if
Ur baits up off bottom
While on a drag
Would help alota guys out there to see it
We share it out just like this vid
😁👊👍
Enjoy ya content
Tight lines my friend
👊
@@cattucky7297 thank you and I'll have to do that.
Let’s go Dad!
Awesome info thanks for shareing
Yes sir thanks for watching.
I'm going to look for the material to make some of these .
Yeah it will save you some money for sure.
very good info...thanks
Thank you.
What a good, easy way to make those. I couldn't tell if they sealed watertight but a little squirt ofcheap caulking in each end of the tube would give a bit of flotation as well as the ramp effect.
Enjoying your channel a lot.😊😊
Thank you. Yeah I've sealed them and not. Haven't seen a difference either way. The plastic seams to be buoyant enough. But sealing it definitely doesn't hurt.
@mickaburkhart14 ok, thanks for the info. If you haven't seen a difference, I guess it is moot. Really enjoying your channel.
@@bluesdad54 thank you for that. I truly appreciate your support.
Can’t wait for the planner boards video
Thank you. It's in the works.
Solid information.
Thank you
Very nice 👍 good job brother 😅
Thank you
Great video. No need to seal the air line? Bring on that planer board video.
No I've tried sealing it and not. Had same results either way. Water gets in it but the plastic is buoyant enough to not make a difference.
Great video!!
Can't wait to see the planer board video
I'll get started on it soon.
Good job buddy, looks like those will perform as good as any
Yeah I've used others that are on the market and they are definitely just as good.
Yes sir adapt and over come…nothing like breaking off 10 dollar rigs kinda hurts your feelings…
Yeah it does lol.
Just curious if you have had the sinker slides pull out of the tubing..? Thanks for the great videos!
No never had that happen. If it does get hung up I lose everything. If I'm lucky I'll come back with the metal clip on the sinker slide.
Would like to see how you make the planer boards!
That video is in the works.
Waiting for the planer board video.
I'm gonna get started on it soon.
Micka, What brand of sinker slides do you use to make your dragging weights? I use the Ez sinker slides, and they are green. The ones you were using looked to be black. Thanks
They are called Dr. Fish. I found them on Amazon. I get 100 for like 12 bucks or something like that.
Looking forward to the planer board video
You fished a toys for tots tournament last year.
Will they have that again this year and if so do you have information on it.
I would like to participate
Thanks for your time
I'll do it next. Not sure about the tournament but I'll find out for you.
@@mickaburkhart14 thanks
Where can I find the heat shrink around town? Tried Rural King and Lowe’s.
Honestly the best place I've found it was Amazon.
What size heat shrink did you say you were using? I have some 3/8ths but even with oil the air line would not go in. Thank you and I enjoy all your videos.
Thank you for that. Ok some 3/8 heat shrink are a tad smaller. I ran into that too. But I ordered some off of Amazon and it is just perfect. The brand is called electriduct.
@@mickaburkhart14 Thank you.
@@philipprice9671 you are welcome.
What is the maximum distance of meter to throw from the beach for dragging weights ?
Oh that I don't know. I've never tried to do that I can't say exactly 😕
I can throw long distance from beach for dragging weights ?
Yeah I would think so. Seems like it would go further than a regular weight because you could almost whip it out there. But I'm not really sure.
great video was wanting to make some because you would go broke trying to buy them. What area are you from?
What is the plastic u put
on top the swivel goes
I think maybe your talking about the 3/8 air line or possibly the sinker slide.
How much current are you dragging in that you use 8oz. If you don't mind me asking??
Like 2 to 3 mph current roughly. Probably not exact but close.
Thank you sir,
Appreciate you taking the time to answer questions.
Does it get that fast on the cumberland at times. This my first summer fishing there. Fast as I've see sovl far was about 1.5mph
Thanks again appreciate very much
@@jeffwhiteside1124 yeah it does get that fast on the Cumberland. But I still like to drag regardless lol. And don't have any problems answering questions. I love helping out where I can.