I Finally Bought a FIRST GEN DIESEL!!!
Vložit
- čas přidán 23. 09. 2019
- After a long time I finally pulled the trigger and got a 1984 Ford F-250 Diesel 6.9 International. I couldn't bring myself not to find some form of a project! We'll be doing a lot to this truck to clean it up after sitting for many years.
-
FOLLOW ME ON INSTAGRAM!
@thecraig909
@carrnagge
-
CHECK OUT MY COUSIN MICHAEL'S KILLER '69 MUSTANG FASTBACK PROJECT!!!
/ @abouthorsepower
-
SEND ME STUFF! (If you want)
TheCraig909
P.O. Box 362
Ramona, Ca
92065 - Auta a dopravní prostředky
This trucks awesome man glad we got it!
It’s EMP proof. I’ve got a 7.3 Powerstroke and wish I had a manual. It does shift good though.
"Has a lot of rot"
*Lives In Michigan*
Psssh thats surface rust
Literally my 85 F250 has holes to drop the jack bottles through the floor
@@JB-tb2qp Lol my 79 F150 Shortbox has a nice lil foot window for easy street viewing
So true.
The 2009 Silverado I drive at work, already has a massive rust hole the bed fender. It's almost 2 foot wide. They dump literal tons of salt on the roads in the winter here.
Rust is lighter than carbon fiber
Did you say a diesel truck didn’t have enough voltage to spark? Are you sure about that?
I was glad I'm not the only one who was about to question that lol. Maybe he meant glow plugs cause 330k miles it's probably an old worn out loose girl so compressions a bit down and needs the extra cranking to build the compression up. Dunno if its mechanical injected no that familiar with the 6.9 but get enough fuel in the cylinders. But he did say that lol
Jelly052 those old IDIs are a non turbo mechanical injection diesel built by international harvester. Your probably right. She’s probably pretty loose!!
@@chucksgarage7165 Thanks for the info always looking to learn more. And yeah it kinda sounded that way sounds like a super dead battery yet was still spinning it over not huge drag down from the compression stroke. I love international, the 7.3 was a beast. That's my dream truck obs dually turbo 7.3 dont think think they came turbo or only some years did.
Chuck's Truck I meant to say glow plugs. My bad. There was a lot I was going over and spoke wrong lol.
Chuck's Truck why do people like you have to pick at every little thing like that
Craig definitely can see this as your work truck. Had one major regret seeing 'er go
I definitely like it!
Ah the old bullnose. You cant buy that, its going to make me pull my own out of the weeds and build it, and my wallet cant handle it.
where you at i need a ford
@daniel bean "let ad-rev pay for it" thats funny.
Too late. It's okay it'll be up for sale soon, until we buy another haha.
@@Thecraig909 Trust me, I dont need another project in my driveway
Absolutely love that body-style of Ford truck, just looks powerful to me. I've never owned anything with a Diesel engine, but I love the sound and smell of Diesels, it is the sound of torque! The Mach1 Mustang in your buddy's garage looks like a fun toy too :-)
I have a 6.9 and a 5spd in my 86, you have 5 gears, slow, slow, slightly slower, extremely slow
This is the best comment yet! so true
Did you swap the 5 speed in?
I loved and to this day I miss my 1983 F250 6.9L diesel. She had quite a few injection and glow plug issues, I slowly worked many of them out. I put tons of miles on that beauty before I was an idiot and sold her to someone that couldn't handle her issues and turned her into a truck bed trailer
Yea man I like this truck a lot. They’re tanks!
I love these 80's fords. My dad has an 80 longbox f150 custom with an all original 302 (All the emission stuff included just disconnected) and 3+Overdrive. Minimal Minnesota rot (Cab corners and boxside wheel well).
Yeah i love these things too, where i live they got ate the fuck up by rust so you dont see too many in any good condition
I had an 86 4wd. 4 speed. It had an ATS turbo and would get up and run. It got totalled unfortunately. Great trucks. Keep it Craig.
Man I want those rims for my 78 250, I like the classic look it gives it
Edit: I really want to see more on this truck man, god your videos are amazing
Thank you so much! really appreciate it man. We'll make a few more videos on this.
I almost bought one just like that as a project vehicle hauler. They’re slower than shit but really pretty neat.
That's what this one is great for!
Slower than shit,but tune them and you're all set
@@cocmaster4474 can't tune a mechanical engine
@@wyattfollestad8872 thank you for replying I have a 84 ford f350 6.9 diesel
So there's no way to make it faster? I didn't think so but thought I'd ask anyway
@@David.lovesU there's a banks sidewinder turbo kit that really wakes the truck up and can get you 22mpgs that's the only way I could think to make some power other than swapping it for another engine
4:55 Ugh! I hate when my diesel truck doesn't have enough voltage in the ignition system to spark?!?!
@Stephen Clark apparently the "GLOW" plugs on his IDI "SPARK". I think he has bigger problems.
I'm very aware of my mistake. In going over many things on the truck I misspoke, my bad.
@@Thecraig909 Got to love the internet! Make a mistake and you'll get corrected. Does it get cold enough in your location to need the glow plugs to start it. Out of all the IDI's I've been around there was only one that impressed me a little bit. My father has a '92 f350 2x4 5spd with 4:10 gears. He rebuilt the engine and I think it is the strongest 7.3 N/A I've been around. It isn't fast with the 4:10 gears but pulled well.
James Sheets, I’m in Texas & even down here my 93 idi needs the glow plugs and mine has 210k w very little blow by at all, & I checked the CDR & it’s not leaking that I can tell.
These things are dogs, but man they’ll run on anything, & will last forever if you stay on the coolant adaptives & oil changes.
I’ve got 2 idis. A 1983 f250 xlt 4x4 with the banks turbo kit and a 1984 f350 flatbed. Both with the 6.9 and the 4 speed. Awesome trucks. With a bit of work plenty of useable power for towing. Definitely works best as a work horse they’re not something you wanna try to go hunting for power in unless you’ve got deep pockets.
Good find man! I really want to get one of these old non turbo 6.9's. Surprised to see the rust but of course if it's been by that "salt air" that totally makes sense. Here in Ohio, we get our salt rot from the stuff they put on the roads during winter. Thanks for the video
I had a 84' 6.9 and loved it,..... still trying to get it back !
Most people would turn around and run as soon as they see this beast, its badass as it sits. I've got a 1986 f350 cree cab dually not diesel but its a bullnose as well 🤘🤙
Dude hell yeah I have an 86 f250 6.9 truck they are super fun in the single cab configuration with a manual and they are cheap to make fun with injectors shimming the pump turning up the fuel and a stock 7.3 idi turbo super pumped to see this thing
Those old diesels last forever. I had an 86 E-350 with the 6.9 that went 774,000 miles before it spun a bearing. Drove it 20 miles back to my house . It would take you anywhere just don’t be in a hurry to get there.
Sweet. My uncle use to have one just like it. It was a workhorse for sure. I just bought my first diesel last week. Its a 07 lbz duramax 1 owner with 75k on it. I got it for a super good deal. Thanks for the content. Keep up the good work.
Cj Hill That’s awesome
Good find I drove an 86 f250 6.9 for a long time . Fun old trucks. Not fast but they'll get the job done.
In all honesty, these IDI trucks are loyal. They dont make a load of power, but they're always gonna run and drive. I think itd be cool to see it lowered 3" with a different set of wheels
Sweet. Just a good time with your buddy. 👍
Awesome vid man, I love my bullnose and it’s sweet you got one to.
Project blue collar? Love the channel and videos Craig! Keep up the awesome work!
Nice find! I'm a little jealous. I want to do things like that, I just have to wait. But killer truck.
Very rad dude! You guys love these 2wd work trucks hahah .
Cool .. will be following to see how she turns out .. prob look a lot better when the rack An work box comes outa the back 👍..
I love these bull nose Ford's can't wait for more videos on it
When I was in high school my best friend had a new 1984 Ford F-250 diesel, he put 12 inch cherry bombs turned out behind the wheels, man it was loud!!! LOL!!! We had a hell of a lot of fun!! LOL!!! That 6.9 had a lot of power for being a non turbo....
I have a 1986 f250 6.9idi 4speed 2wd the things a tank.
awesome truck I like the blue and good idea on the black rim work I need to do that!
Nice find! What a solid deal for a badass work truck!!!!!
Love bullnose Fords. I've owned an 83 F-150 4x4 with a 300-I6 and a 4 speed and an 86 F-250 HD 4x4 with a 460 and 4 speed. The 83 was the best truck I've ever owned and I still miss it 19 years later
I never see ford guys on CZcams I’m a mopar guy myself but I love wat your doing 😎
If I were you buy it and keep it they get great mileage probably better then your other truck and that galaxy together lol plus you and your buddy can go cruising and take pictures together in the same style trucks
We'll keep one in the future. I want a 4x4 so im not attached to this one as much. But you'll all know when I find one i'm keeping.
My first truck was a bullnose. I will always have a soft spot in my heart for them.
I had one. Was slow but dependable. Four speed transmission made it a lot more reliable.
I honestly can’t believe you got an atc 70 and it looks like a 3 speed... 😏🤙🏼
Dude it's sick im stoked. Gotta decode the VIN and see what this thing needs.
If that thing has dual tanks and a switching valve you should either start trying to locate a new one now to have around and defeat the thing and run stright off of one tank or another. It will fail and it will leave you. You can take it apart and manually flip it over one from tank to the other but its a pita where its mounted and its jsut made worse by all of the fuel that will be runnign all over you as you try to get it out on the side of the road.
Good to know. I’ve been thinking about creating a bypass for it by using a brass 3 way valve that I can manually set the front and rear tank by hand
@@AtomsForFuel sending units make that a pita. The main thing is that you make it so you don't get left.
Old is gold. Good looking classic Ford
That’s a nice truck I want to see more video of this truck👍👍
I had a little 70 like that when I was a kid, good times.
I spray painted my wheels with brand new tires on and no index cards. It flakes off of the rubber within a week, and if you really cared just throw tire shine on the tire before painting and it'll stick even less.
Best diesel truck ever made damn things never die
Good luck with the truck. A lot of those old first Diesel engines are lemons though!
My dad had a black bullnose f150 in the 80s. It was a 300 straight 6 and 3 in the tree. Some kid in a stolen car rear ended it when it was parked on the street. The insurance company totaled it although it was probably fine because it was an older truck. It was a good truck.
nice truck craig, i love those old idis
Hey THEcraig909, because of its age you need to keep some liberation in the fuel system cuz the fuel was different back when the thing was new. It’ll run better to.
Love the truck you got an awesome deal.
From the spring of 1997 to the fall of 2000 I was a billboard painter our work truck was a 88 or 89 2 wheel drive f 350 crew cab long bed we workers loved and hated that truck loved it cause it was big noisy and strong as hell and scared the shit out of everybody we hated the truck because the tires weren't good for going through anything we would joke around and say the truck could get stuck on wet pavement ..another thing we all hated was the fact that at lunchtime that truck was hard to park in a fast food joint parking lot it was crew cab with an 8ft bed we used to say it was like parking a locomotive in a basement...
Buy two $50 Walmart batteries, run a bottle of Lucas through it and change the fuel filter. Check the connection at the starter, I had a hard starter once and the nut cable connection at the starter was loose.
Love the truck, looks badass
That's one of my favorite body styles that's the one they were making when i was born. I'm gonna get one 1 day
Keep the 6.9L stock, no turbos! Use ONLY Motorcraft glow plugs. And get that weak automatic rebuilt with heavy-duty parts from like Centerforce, as they can't really handle the torque from those diesels. And yes, change out all the fluids. Those bulging tires are likely old, and ready to sidewall rupture. Check smalltown tire shops for some good 10-ply ties. 5 of them, so as to have a good spare. Renount the spare up in the bed with a spare mount system, sp as to padlock it. Invest in a vinyl tire cover to protect tge spare. The cab and rust spots, use some fiberglass bondo and then repaint.
Hell yeah, not a bad score.
The diesel didn’t have enough battery juice to spark? Haha
I have had 2 of these bad boys. Wont go in a hurry, but they'll pull a house down!
Just found your channel I love the truck watching the video I see the next video on my auto feed shows u sold the truck 😱😞
Nice score my dudes you should bed line the bed or fix some of the bondo and rust. I almost had another 73 f100 just like mine for 1000 the passenger door, cab and the bed was t boned. With some rust on the cad corner and driver side floor but some other guy beat me to it
Have one. Love it.
Sick truck what kind of paint did you use for the rims they look really good ?
i wish you would keep this truck and fix it up!!!!!!!!!!!!!!!!!!
I’m thinking of getting one but short bed or a 79 Ford
Great video guys hope to see more of this truck 👍👍👍👍👍👍 and for sure let me go subscribe to his channel especially because he loves Fords too
Ceramic coating works best to rejuvenate old faded black plastics and it will last awhile. Tire shine will wash off after the first time it gets wet.
You need those index cards for your next test!!!
Bullnose Ford’s are hands down the coolest trucks ever built
no dentside highboys
Just sold my second bn idi yesterday. Now to decide between fixing my highboy or buying another bull.
Iv had a cople idi,s and would of liked to see more on the macanical parts not painting wheels and looks and good luck on the no turbo i feel ur pain keep it between the ditches
You wont be destroying any hills. But you will get there.
I just get a running start to decently top serious hills.
Use to drive a bullnose crew bus with a 6.9 and a bank sidewinder kit on it was good truck but like a 7.3 idi with a sidewinder still slow
First Vehicle, '84 F250 420 Turbo Diesel 4x4 Flatbed and Love it, if I wasn't out of State woulda Snatched that one (Bad Addiction!), only thing is that the Fuel System is the Weak point and Can be A Pain and Annoying, especially since they are so Damn Simple.
I don't see many of those generation Ford trucks out on the roads anymore like I use to back in the day.
Hell yeah! Finally you get one 6.9s are ight for A - B Daily driver/Cruiser etc but ain't that great for HP or Pulling IMO.
The Point is! IDI's last for evvvvvvvver!
Cool project guys. I think I'd enjoy my 69 F100 more with cool friends like you
Turbo the 6.9 and make it a cool tow rig
Love my 6.9 IDI.
Keep the look and somehow add hp to make a killer sleeper.
No way to make a 6.9 a sleeper lol without an engine swap at lease
Awesome truck
You should take that body off at chassis and drivetrain and put a late 60s early 70s model Ford pickup body on it
I've had a 7.3 idi n/A for a while now. It's a 5 speed 4wd first motor hadn't ran in 15 years. 2nd that's in it now hadn't ran in 20😂. @thecraig909 if you ever have fuel issues, one main thing to do is get an electric fuel pump on it. The first motor in mine wouldn't run mechanically so I used a $60 edelbrock mini diesel fuel pump like an inline style. It was just ran with a toggle switch to the dash from the battery on my terminals. Covered the mechanical fuel pump hole with a fabricated 10 gauge steel plate and the oem fuel pump gasket. My pump is ziptied to the frame rail😂, puts out a lot more fuel than stock.
I love old trucks.
Subbed for this build
Love the truck put a flatbed on her ranch hand bumper fix rot itd be sweet looking
Hell yea!!!!!!!! Bullnose crew!
Love my 2nd gen 93 idi!
U 2 ding dongs left out the best part!!! U literally spent no time on the engine!!! Fail!!
Cringe
Thats a sick truck
You didnt say anything about having those truck camper mounts on the front of the bed. Wonder if it would collapse if you put one on it with all the rust. Rare to see those on trucks now.
Keep the original 6.9 have 4dr with turbo kit fuel turned up boosting like 16 pounds on stock head bolts
87 6.9 IDI bricknose only 99K miles I still keep up. No rust.
My old 93 Dakota was pretty much in the exact same shape as this truck. I have a 1999 Ford ranger now that's in a lot better shape.
damnnnnnn that thing lol wow, i would have saved up enough for at least something with a solid body
Check out some of Mustie 1's videos. Ive seen him use mineral oil and melted toilet fing wax to preserve patina'd paint. works good!. Also, when painting mounted wheels,I just use vaseline smeared around the edge. after paint just wipe it off. Todd the retired trucker.
I am sure we all were looking forward to seeing the engine
Look up a country musician named Tag Thomas (Known this guy since high school)
He’s got a 6.9 with bigger injectors studs &gaskets , and a 6.0 VGT where he just leaves the veins open usually
If that's just surface rust I'd clear coat it and keep the look. Its pretty cool looking just as is.
The 6.9 is super underrated
Yes more of this like the content for sure lol
We had an 83 f350 dually dump truck with a 4 speed
You can also paint the center caps black without any problem