Full Service on a Craftsman Poulan Leaf Blower Vacuum - $20 Equipment Lot Ep.01
Vložit
- čas přidán 13. 09. 2024
- I picked up a $20 lot of 2-stroke equipment from a marketplace ad, and pick out one piece to fix first… The Poulan-made Craftsman 358.794743 Leaf Blower Vacuum gets a full service to bring it back to life.
$20 Equipment Lot Playlist - • The $20 Equipment Lot
Walbro WT875A Carb Kit: D20-WAT or K20-WAT
test fire, carburetor removal, carburetor cleaning, gasket diaphragm kit install, new replace fuel lines, new air filter, new spark plug, carburetor tuning
#smallengine #smallenginerepair #repair #troubleshooting #craftsman #poulan #blower #2stroke
craftsman weed wacker please. . I've been watching all your stuff this morning. Thanks
On the fiber gaskets like the one that put up a fight, I tend to spray on WD40 and let it sit a little before trying to remove. They seem to soak it up pretty easily, and usually are easier to remove. Doesn't always work, if it's really bad. Sometimes, your only option is dig it off - soft small wire wheels for a rotary tool usually do very well and shredding them off lol
Thanks for the tip! Always good to add more tricks up my sleeve
Lol, you kept adjusting that H screw instead of the L on initial start up…done that before
Hello, I wonder if that gasket even needed to be removed and replaced. I thought it looked good but I wasn't there. Man that was on there!! Nice score on the lot. I have had some equipment that was faded like that. I have used a torch to bring the color back. That one I would probably use Restore by 3M and then use the torch. Some disassembly is required to use a torch.
That gasket was in decent shape still, but if I have the kit with new gaskets I usually like to replace them all regardless of the previous gasket condition. I did play around with a torch on this one.. I was marginally successful in some areas, but the most faded parts just started to singe brownish (likely user error) so I stopped lol. I have not thought of using the 3M restore, so I may try that. Thanks for the suggestion!
@BackyardRepairs I can appreciate that with the gasket. I felt your pain, tho. Once you start, you have no choice at that point. When you cut the video, I thought to myself, "ATF Soak time." On the 3M Restore, it lasts longer than silicone spray alone, and yes, silicone spray is another way. That's what used car dealers use to make under the hood plastic look new. Is this your first channel? Your doing a great job.
All good tips, thanks again! And I really appreciate that, yes this is my first channel. I’ve been fixing stuff as a hobby for quite awhile but recently decided to start filming it to see how that goes
@BackyardRepairs you are doing a great job of editing, and enjoy having the time to respond to every comment. As you grow, it gets harder and then impossible to respond to everyone. I would like to start a channel, but for now, I moderate. I'm a prepper of sorts. NYPrepper is where I moderate mostly. Keep up the good work, and don't give much of your time to navigate comments. Every channel gets what we call trolls, delete and block them, and move on. I'm looking forward to seeing you grow.
Te lo compro,podrias enviarlo a Puerto Rico?
Sorry, I only sell these in my local area as shipping is a pain.
@@BackyardRepairs yo te pago el envió