Switch Installation for Pre-Built Keebio Hotswap Keyboards
Vložit
- čas přidán 19. 07. 2024
- In this video, we'll show you how to install your own switches into your pre-built hotswap Keebio keyboard. All you need is just a screwdriver and the switches you'd like to install!
Steps:
0:00 Intro
0:23 Unscrew bottom plate
1:29 Remove placeholder switches
1:49 Install switches in corners
2:54 Check switch alignment
3:43 Install rest of switches
5:05 Inspect switch level and reassemble case
Get your Pre-Built Keebio Keyboard here!: keeb.io/collections/pre-built...
Need some switches? We've got some here: keeb.io/collections/switches - Věda a technologie
I'm putting in the switches thanks!
Have several of your keyboards and very happy. I'll have to take a closer look at current stock.
So awesome you're enjoying them! Thank you!
Would you recommend 3 pin or 5 pin. I like gateron pro brown but can only find them in 3 pin.
Both 3 pin and 5 pin work well! Just be sure it is snug in the top plate and it'll have the support it needs. Cheers!
Is it permissible to change the switch in the Iris keyboard without separating the bottom plate and middle layer?
It’s possible, but you risk popping off a hotswap socket if you do not support it from below