Evinrude 40 HP Part 4: Adding Electronics
Vložit
- čas přidán 6. 09. 2024
- Outboard Starter Motor Reference Chart: everythingoutbo...
Starter Solenoid: amzn.to/2szGajg
1989-2005 40-50 HP Starter: ebay.to/2sn0tS4
Battery Cables: ebay.to/2Hcmrf0
1989-1990 40-50 HP Wiring: ebay.to/2JowGC7
1991 Wiring: ebay.to/2su9F64
1992-1995: ebay.to/2J38w0A
Cable Grommet: ebay.to/2Hb63eF
Terminal Block: bit.ly/0512762
Voltage regulator: bit.ly/0581778
Flywheel Puller: amzn.to/2sFeZpG
Stator Ring: bit.ly/0334994
Torque Limiting Sticks: amzn.to/2sqcOou
Screw-Driver Sockets: ebay.to/2J78KUF
Anti-seize: amzn.to/2sHa8UM
Gasket Compound: amzn.to/2smptql
Thanks Brandon. Oh for everything. thats all
watched the video today and got me thinking bout where to look at problem i have w a 1975 50hp evinrude sizzler-its a sizzler alright-it shocks me when im holding the controller or touching the throttle-i put a used stator in and maybe i have a wire shorted to the frame-i am going to run at night to see if i can see sparks-it runs good and i need to sell as i fix and sell junker motors for spare cash-cant sell a shocker-good video
Hi Brandon, Whats the chance of you doing a video on the johnson 3 wire stator and the 4 wire regulator, the same as you have fitted to your 40hp, show us how to bench test each item and test while the motor is running. I have searched the web and youtube but cannot find any information on the test procedure of those particular items, there is a video on a johnson 4 wire stator and some info for other brands. I'm sure there would be many people out there besides myself that would appreciate your imput and explanation.
Cheers Peter.
Just what i needed got a 92 48 special no battery wires i thought i knew where to attach everything this helped alot thanks! Subscribed!
Part 4 of Evinrude 40 is much appreciated. I have a VRO casualty ‘94 50hp Evinrude and bought a ‘95 like new powerhead. The powerhead swap was easy but I was not aware that OMC changed the engine wire harness in ‘95. Your video helped me to reinstalling the ‘94 big red plug harness.Thanks Subscribed
Man thank you so much!!! I was lost with my 84 Johnson 40. This cleared the cobwebs.
I have an 87 that I bought used, wire harness is a mess, I have like 3 wires going nowhere. Do you know where the temp sensor hooks up, and where the coil positives go?
@@daverobinson9351 man I have no idea. This is my first build, and I am lost for now. Sorry for the late reply.
@@zornbratton Hey, no problem. I have a manual, I just have to learn how to read it lol
@@daverobinson9351 Me too lol
Hello, I have a question, I am from Poland, I have an evinrude 30hp from 85r I put on a stator and voltage regulator and the battery charging is when the battery is charged on the meter shows 12.5v charging and when discharged it is 13.5v and then it drops to 12.5v, thank you in advance for your answer
I just got one of these, but it's VRO model. When I push the start button, the choke clicks, but the starter/solenoid does nothing. I can jump the starter, and the motor runs fine. I just changed to starter solenoid and that didn't fix it. So, is my problem in the start switch/button? I assumed the switch was working because the choke responds (clear click from there). Starter solenoid makes no noise, but definitely has power because I can jump start it from there too. So am I hunting a bad connection in the start switch or a fuse somewhere? Thanks by the way - your videos have helped me with a number of motors.
I gotta ask, where does the temp sensor hook up? And the coils positives.
Hi I have a 1990 Johnson 55 commercial tiller and want to convert it to remote. I noticed your motor has a tiller tube that is capable of getting a steering shaft through it. Mine has a 1/2 inch pin that goes through it almost like a very long bolt also from your other videos your motor has place for the shifter and throttle cable to be secured in a anchor block mine does not. ???
Will these engines Run just fine without a functioning charging system? Meaning after its started as long as you dont shut it off will it continue to run? I have one that i dont believe is charging, previous owner said he never has to charge the battery. But my quick running voltage test i had 12.6 volts at idle with a charger connected (6amp cheap small charger).
How to solve the problem when Im driving the motor is jumping and going out of gear
It's evinrude 35hp
@@trajcetemelkov4191 Take apart the lower unit, and inspect the clutch dog.
Hello, lm hopeful you can help me, l have a 1991 johnson 40hp hand tiller, l have converted it to forward controls with the same control unit you showed on line, l've added electric start, converted my gas assist ram to hydraulic ram, my motor already has a regulator and stator fitted but does not charge, my stator has 3 wires, yellow with blue stripe, and 2 yellows with no stripes, just plain yellow, although they are both brown wires with a yellow rubber type of coating on them, the yellow coating has broken down and is peeling off, l cant find anything on the web describing which way they should be connected, or if it even matters which way, lm wondering could they be connected wrong, if l swap them over can l bugger something else? Any help would be appreciated.
Cheers Peter.
There should be a yellow with gray stripe too. Its hard to tell but should be there.
All 3 wires from the regulator and stator need to be connected together properly.
Yellow/blue, Yellow/gray, and Yellow, all connect to the corresponding wire.
I will check again but lm pretty sure mine have no stripes, l will remove the shrinkwrap and look further up the wires.
Cheers.
Yes you are right, l stripped the shrink wrap all off and found some undamaged coating and found the yellow with grey, all is good and reconnected, still not charging, have to work out how to test things now, Cheers.
Commercial fishermen love tiller models
A lot less involved, and a lot less to worry about, more reliability and simplicity.
I agree with them; but they have a purpose, and this engine will have another.
Impact screwdriver