How-To Remove Allison 1000 Transmission
Vložit
- čas přidán 29. 12. 2015
- Here is a short run thru of how to remove an Allison 1000 5-Speed transmission from a 2003 GMC Duramax. This process is the same for all 2001-2005 5-Speed trucks. While this process varies for 2005-present 6-Speed trucks.
Steps:
-Remove Starter, tie to frame rail
-Pull off fan (Unless you have a 36mm box end wrench)
-Remove torque converter bolts (x6)
-Remove rear drive shaft
-Remove front drive shaft
-Remove Transmission cross member
-Un-plug all T-case wiring
-Remove T-case breather
-Remove T-case
-Remove all Trans wiring
-Remove fuel line brackets
-Remove exhaust v-band
-Remove Trans cooler lines
-Remove all bell housing bolts
-Remove transmission
Music was provided by NoCopyrightSounds
Alan Walker - Fade [NCS Release]
Song - goo.gl/gRMuAi
Artist - goo.gl/vVlgHJ
Any background music is credited to its original owner.
Disclaimer - Some information in this video may be incorrect or not manufacturer recommended. I am not responsible for any problems or damage you encounter. Watch and follow this video at your own risk. - Auta a dopravní prostředky
That techno music made the video kind of hard to watch.
But informative none the less. Thanks for taking the time to make it..
One of the Best Videos I saw on removal! Great Job..THANKS!!!
Wow, such information, much helpfulness
Thanks for the awesome video!
Thanks for the video very informative. Any difference on a six speed Allison LBZ? Is the process generally the same?
The only difference is internal. An allison 5 can be a 6 by changing the transmission valves for about $3k. Thats the only difference. I guess if for some ungodly reason you wanted to go from a 6 to a 5 you could as well by changing those valves.
Probably would have been a pretty good video if Helen Keller wasn't running the sound board :-p
You know what I would say is the best video ever
Nice job.!
Good information
what did u switch it with i know i need to do the same
nice video, sweet tunes playing too
Music is super distracting. Doubly so when you also have the music playing in the shop.
Brakcets. Diesel lines. Shift cable etc.... Could have been popped off, pushed back instead of removed. Faster install
Torque converter bolts should be 15mm head and the balancer bolt 32mm. That is what my 05 LLY is.
what’s the cost for all this job?
How do you remove the casing behind the fly wheel? Mines cracked
Tayler Lessard the adapter plate?
torque converter is 15mm bolts. nice video tho
Brendan Leary yes they are 15mm bolts
This seems stupid to ask but is the transmission only being held up by the engine? Or is it attached to something else?
Andrew Little From the rear it should be mounted to a cross-member bracket.
Isnt there an access plug for the converter bolts? I know ford nd dodge usually have access plugs.
No
Love the video but very difficult to watch with the music.
Can you tell me how many bolts are to remove from transmission holding to engine?
vanagoland jua 9
And I like musical wow
Is this the same transmission that 8.1 uses
yes
Why would someone need to remove an Allison? Is it to make it a performance trans or did it break?
The Allison 1000 cannot handle much over stock engine power. Mine is being replaced because I added a little engine power and the Allison cannot handle it.
I'll be removing mine soon because my flexplate is cracked.
Looks like a pain in the ass but I'm down
nice video. If you had a leak coming down the front of the Trans in the bell housing what would you think it is? serious or maybe just a torque converter seal?
front pump seal is most common, might has that leak. Then it can also be a cracked torque converter
Veikra
Very common for fluid to leak past the pump to case bolts. GM has a tsb out for this, invovling replacing the sealing washers. We have found that this is a patch fix, as they end up leaking again. Best fix is to put some right stuff sealant on the bolt threads.
@@Veikra
Dasvidanya.
@@shakira1784 Do skorava
Techno music sucks!
Informative video
You did a lot of things the hard way.... work smarter, not harder.
Jake Zimmerman agreed they did that shit the hard way
Jake Zimmerman from start to on the tranny jack. I could do it in 45 min.
Lol. 3 guys. .. Psh.
Make a video of the easy way. Would love to see it.
What's the easy way, starter chewed up the ring gear... just have someone else do it 🤣
Great video get rid of the horrible music
That fucking music ruins this video.