Make a Table Saw Air Cleaner Storage Cabinet
Vložit
- čas přidán 19. 08. 2024
- Plans for this project jonpeters.com/...
Shop My Artwork jonpeters.com/...
All My Woodworking Plans jonpeters.com/
Hi everyone, for the past 15 years or so my air cleaner has been attached to the ceiling of the shop. I never really liked the way it looked up there and thought an air cleaner storage cabinet for under the table saw would be a good solution and a good use for otherwise wasted space. I’m convinced that this new location will result in more air filter maintenance which can only be a good thing. I hope you like the video and thanks for watching…Jon
My Air Filtration System: www.amazon.com...
Power Pro Wood Screws I Use:
42468 Wood Screws: www.amazon.com...
48578 Wood Screws: www.amazon.com...
1 1/4 Wafer head screws www.lowes.com/...
Design Plans: jonpeters.com/...
My Tool Store: imp.i284638.net...
Merchandise: jonpeters.com/...
Instagram: / jonpeters_
Facebook: / 312021729836
Website: jonpeters.com/
Apparel: Mountain Khakis
www.mountainkha...
Rugged. Authentic. Reliable. Timeless.
#DIY, #woodworking,#homeimprovement - Jak na to + styl
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice czcams.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better czcams.com/users/postUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
This is an absolutely fantastic idea that perfectly solves the issue of finding space in my shop for a ground-level air cleaner. Thank you, as always.
As a brand new viewer to your channel, I thought this was a great build and refreshing to see someone use some precision and step back to screw construction instead of pocket holing everything. I'd like to build a cabinet for my new saw as a project and will use this as a guide, ty.
Wow. It looks like it was meant to be there the whole time. Amazing work as always Mr. Peters.
You put MY shop furniture to shame, Jon! Beautifully done as always and I like how you integrated the air cleaner in with the cabinet.
Jon, like I always have said in my comments about your cabinet making videos, its an art and very enjoyable to watch. thanks for sharing
Awesome use for the Halcyon - it looks great! 😍
A great cabinet for under the saw's table extension.
I’m always learning something from you Jon! The wood block guide for the drawer fronts makes total sense and will definitely make its way into my future projects!
I always love to see those who recycle old materials and continue to find value and add function to their workspace. A nice build Jon, I hope the video and plan sales go well
Thanks Taylor
Joli travail bravo à bientôt salut Jeannot 😉🛠
Nicely done
Great project!
Very nice job. Much better setup from what you had before.
Nice job on the air cleaner cabinet Jon! Thanks for sharing the video with us!💖👍😎JP
Thanks JP!
Nicely done! I have the same air cleaner and I hate it on the ceiling. Thanks for the inspiration!
Love this build Jon! I hope you'll do a follow up later as to how well the air cleaner works in that location vs being mounted on the ceiling. Thanks for another great video!
9:24. The man casually talks about measuring for pre-drilled holes. No need to mention the insane skill he has to operate the tape measure and pencil that fast.
Great idea! I am planning to build a small fan-based air filter for my tiny shop but have no where to put it. It will fit great under my table saw and I can have the bigger box with multiple filters.
I often wonder why all the air filters are up in the air when the debris falls towards the floor...
Great project for the shop.
That was a terrific build Jon & I always learn a thing or two from watching your videos! 👍😉
Thanks Steve
great video and brilliant place for the air filter
I just recently purchased two of the Jet Air cleaner units that use the 12 by 24 inch filter. I mounted one to my ceiling already and it was a pain as I hard mounted it and did not use the chain, I used steel tract that is used to install heavy garage door openers. The other unit is sitting in my floor waiting for me to install it on the ceiling, But seeing your setup make for a more practical use of the air cleaner. and Like you I already do not like the air cleaner mounted up on the ceiling. to hard to get to the air filter to change as I went with Hepa and merv 13 filters.
Great job as always…Love your work..👍🏼
Great build Jon!
That looks great!
Love a good shop project 👌👍
Cool build and absolutely an idea to consider. However, isn't it so that the finest particles, and those of most concern for air quality, will swivel mostly in the upper parts of the room, while the bigger ones will fall to the ground, etc? *Jay Bates* (in his previous shop?) made a DIY air cleaner and by adjusting the angel of the 'exhaust' he was able to optimize the air flow in the room and noticeably improved the cleaning.
Thanks, I think the benefit is that it will be cleaned more often
@@JonPetersArtHome I'm not sure if you know but Jay's model was a mobile floor unit, and I think one of the reasons he built it was for easy/frequent cleaning. I link his video: czcams.com/video/Uzpn09OIyqw/video.html
I have no idea if you're interested, see the need or if its possible to adapt this concept to your model. In any case, both of you made me inspired to see if I can make something that could work for my shop (bcs of fragile lungs I really should take better care of my dust situation). In any case, thanks you too.
Watch that nail blow out.lol. Nice work
Great project and awesome presentation!
John's so good at making videos, he could almost have a 2nd channel showing others HOW to make videos!😂
As usual, perfection!!
Trabalho impecavel 👏👏👏
Your shop is looking great Jon! DD
Great job Jon. Really appreciate the time and effort you put into providing such great content. Question-does the new cabinet support the SawStop extension wing? I didn’t quite follow that. Again, thank you so much and God Bless.
Thanks Mark, no it fits under
@@JonPetersArtHome Thanks Jon. My legs will need some additional support due to shop issues. Do you think using the cabinet for support would be fine? Your clear explanations and excellent camera angles have always helped bring new light to various processes. Again, all the best from Bend, OR. Be well and God Bless.
great job!
You've really invested a lot into the shop this year Jon. It's looking great. Now.... you owe me 20 furniture builds for 2022!!!!! JK,JK,JK I just couldn't resist Bud. Hoping all is well Man, Dirty Jersey out!!
Ha ha 😂thanks Mike!
It's an interesting choice of thumbnail image with a red line that makes this look like an already watched video. I almost skipped it.
Me too. I saw it on my screen and thought "I don't remember watching this." Fortunately I noticed that it was just released or I would've passed it over.
Thanks for the heads up! Just changed it to black 👍
I'm glad I didn't miss it.
I always thumbs up a video to tell if ive watched before.
Thanks for this interesting video.
Could you tell me why you apply thermal glue on the bottom of the drawers?
We do not do that here in France and I would be happy to "import" your skills😃
Are you still using the Montana counter sink bit? Looked like you were back to a Dewalt one. Looking at Montana, but wanted to make sure they last before shelling out the $$.
I like this idea. Is there any pro/cons to having the filter below the table saw as opposed to hanging from the ceiling?
For me the pros are that it will get more maintenance
how has this worked for you over the year? Curious to hear feedback if its actually cleaning and doing what it normally would from the ceiling ...
Hey John: Love the channel. Recently discovered it and have been binge-watching. Wondering - are you happy with the air cleaner down under the table saw table or would you rather it up in the air above the shop? I recently bought one and am planning a build similar to yours, but just wondered if it’s as effective down near the ground vs up in the air? How’s it been since you made the change?
Sorry - “Jon”
Nice build, Jon~! Just wondering, do you feel that the air cleaner will be as effective down low for the fine particulate as it was mounted at the ceiling? Mine is mounted about 8'-10' feet up in my shop (open ceiling pole barn) and I'll admit that it probably needs cleaning way more often than what it gets. Wait, have I cleaned it yet since hanging it up?? ; - )
Hi everyone, If you are going to build this project I would use 3/4 plywood and just use smaller casters. this is the link to the plans jonpeters.com/shop/table-saw-air-cleaner-storage-cabinet/ Thanks for watching! Jon
Jon, your tool store link is broken. Just a FYI.
HI Jon. I’ve been a fan for quite awhile and I was wondering now that you have Mede additions to your shop, how big in dimension is your shop and then the additional are where you do finsishing work?
Hi Philip, I posted a shop tour this with all of those details if you want to check it out.
@@JonPetersArtHome thanks Jon. I’ll check it out
Just curious, how much is Baltic birch selling for in your area, I live in California and if they even have it, 3/4 Baltic birch sells for over $100 a sheet
About $70
👏👏👏🤗🤗🤗
💯💯💯💯👍❤️
Frig me you are concerned about a bit of rattle in your draws god damb it it in only a friggggggen work shop.