Make Money Making Cutting Boards. TODAY!
Vložit
- čas přidán 29. 04. 2022
- How to make money by selling and making cutting boards. For 10% off your first purchase, go to: squarespace.com/makesomething
Join the Makers & Shakers to watch Sundays with Dave! bit.ly/3yvmOje
Tools used in this video (Affiliate links)
Maple and walnut woods from Kencraft: bit.ly/2zOouoK
Cutting Board Book (Cheapest): amzn.to/38BOlEK
Cutting Board Book (Signed): bit.ly/2kbuROa
Miter Saw: amzn.to/2FDslZw
Jointer: amzn.to/2IJyRRh
Wood Glue: amzn.to/3vuzLYx
Bar Clamps: amzn.to/3s3j3gF
Planer: amzn.to/2swddVQ
Table Saw: amzn.to/2E89suw
Yellow Push Block: amzn.to/347PTUB
Drill Press: amzn.to/2INfx1g
Little Bandsaw: amzn.to/2WwuhgH
Router: amzn.to/3zWG3R1
Router Lift: amzn.to/3zXDU7p
Cutting Board Oil (similar): amzn.to/3EZmMBk
Feet: thd.co/3koohzp
#woodworking - Jak na to + styl
Ayeeee thanks for the shoutout! The amount of money available for cutting boards is truly mind-blowing.
A few of our best strategies:
- Find a niche, optimize your boards for that type of customer, and sell sell sell!
- Talk to everyone you know about what you sell! You never know when someone’s cousin’s aunt’s brother is the State’s #2 producing Realtor looking for nicer closing gifts…
I´ve watched some of your videos in past and always amazed how markets can be so diferent. I live in EU, Portugal to be more precise and the cutting board market here is so "poor". Nobody would pay like 50€ for a cutting board, so its not worth to make them. the only market we have here on this categorie is restaurants cheap pine boards, and thats it ahah
Keep the good work!
@@yohannsantos4901 That could be the difference between end users and business customers. The business customers aren't buying a bread/cutting board, they're buying a marketing tool and some good will. They probably wouldn't spend that much on themselves either :)
Jennie and Davis I love your videos and watch them all the time. Question, are you in the Reserves or Guard? I retired after 22 yrs in the Air Force and just wanted to say thank you for your service as well!
I'm just stepping out of my comfort zone (ie safe job / empty wallet zone) and starting my own cutting board business. Took huge amounts of encouragement to get past my fear of doing something different than what I've done my whole life, but I think it is time to do that for which I am destined. Keeping the old job for now while I ramp up.
I literally just watched your cutting board video right before i watched this one.
I’d have to call this a classic “Make Something“ CZcams video. 100% David Picciuto including Sand In the Place Where You Live. Thanks for sharing your talent 🎉
😁
The only talent this guy has is woodworking, entertaining, designing and being an all round cool guy apart from that he's talentless 🤣
@@jamesgallagher3317 ❤️
Great to see the 🎵 sand in the place where you live 🎵 back again! I enjoyed.
Anyone that can actually make cutting boards and make real money I applaud. Finding something that makes your boards unique or different from the heard is key and the right market.
That said, many people 'think' they are making money just because they sold it for more than the cost of materials and a bottle of glue. And as a hobby that's great for some extra money for your own projects. But as an actual business you need to take into account overhead, consumables, wear items on tools, an hourly wage for yourself, and a margin for the business...then you'll 'actually' be making money.
People would be surprised how much glue is required for an end-grain butcher block. Same thing for the amount of oil unseasoned end-grain soaks. Lot's of cutting means lots of waste too.
Cutting boards are extremely saturated. The best way to maximize profits are to sell on your website with a brand name. So many people are driving the prices down hard because they either 1 get free materials (mills) or 2 sell large batches of basic boards, so the customer assumes they know the price and set their own in their mind about what you should sell your boards for. So many customers have a complete disrespect for woodworkers and their pricing because of this, it’s insane. Like you said, only way to stand out is come up with new designs. Same with flags, basic ones have been driven into the ground that used to sell for a lot, now you have to sink way more time into it than it’s actually worth. Two very saturated markets
I'd already sung "Sand in the place where you live" before I heard it in the video & was about to terribly disappointed you didn't edit it in. Thanks for the lack of disappointment!
I would have thought to glue the dowels at least into the ends, if not the body, so they would stay put, but still allow the body boards to move. So I learned something here! I think it's awesome that you encourage people to take your designs and run with them. We gotta help eachother out. Thanks for sharing!
One thing you can do too is tap them in 90% of the way and put a dab a glue around the top before sending it home. That way you have it glued and know it won’t get into the middle tenon. Probably not necessary but it does work
GREAT video David, the take away is that things don't always go as planned and the key is to keep the project on track and look what turned out. Personally, I like the larger dowels, so a win for me! !! !!!
Really beautiful work, Dave! 😃
Brilliant the way you did it! I've never seen a cutting board like that!
Stay safe there with your family! 🖖😊
Holy crap, how have I never thought about using the miter gauge backward like that?!?! Genius!
Hi David, I received your Cutting Board Book for Christmas and refer to it regularly for ideas and tips ... thank you for creating it. I wasn't nuts about the breadboard style at first, but now, being able to see it happen, I'm in love. So thanks for helping this rookie out. I intend to create cutting boards to bolster my retirement in a couple of years, and totally value your insight. Awesome, just awesome!
Oh wow, thank you Sue!
Board looks great. Thanks for writing the book. I used it for inspiration for my first board.
This is my favourite channel. I especially like it when you explain everything so nicely. I wish you a lot of success with the channel and happy life.
that was probably the best in video promo I've seen a youtuber execute so far. Love how you just talked it whilst continuing to make the board. Well played.
I made you a playlist of cutting board videos. czcams.com/play/PLhqK_8dnaIW0V_zXWBL7WVqiV1cUQbeQI.html
Join the Makers & Shakers to get access to our private community Discord! bit.ly/3yvmOje
That is a beautiful cutting board! I've seen some fancy boards but this one is a classic example of the "less is more" design.
i saw your book at woodcraft here in houston and i was like " oh i have to get this like right now". lots of awesome ideas in your book.
Thank you!!
Love your stuff man, your videos just put me in a good mood!
Thank you!
Hello David, fellow Ohioan beginner woodworker here (Medina oh). I just discovered your channel after starting listening to the Making It podcast (from the first one of course), I am now on #039, so roughly 300+ to go. I love your style, projects, explanations. Keep up the good work. Cheers.
Just looked up kencraft and it’s not too far from me! If I run into you there sometime, first beer is on me if you’ve got the time.
Great video. Thanks for the tips and encouragement.
Pumping out great content! Awesome.
Yass! I was waiting for it and you nailed the timing on SAND! 10/10 would sand again!
David, great video! I have been a longtime follower of your channel, way back from the Drunken Woodworker days, and I have always enjoyed your videos. Beautiful cutting board by the way. I love the breadboard ends. As a furniture maker, I can say you are spot on with your breadboard design and construction concepts concerning wood movement. I always look forward to your next video, David.
🙏 thank you!
A great job, it was great, very well done, a huge hug from my humble Uruguayan channel💪👍🇺🇾
So glad to see Sand in the Place where you Live come back. Made me smile.
Excellent project and video!!
Solid demo, really appreciate the tip about wood movement, something I am aware of but don’t really understand. Also brah, really appreciate the positive message to encourage people to start something new, I’ve always wanted to give exhibiting and selling at craft fairs a shot, but never have tried. Cheers. 🤜⚡️🤛
Very nicely done, Thank you for sharing your video.
Your delivery is the best: Informative, easy to listen to and nice production values.
Thank you!
Grwat video man!! Thanks very
Much for the tutorial. 😀👍
Love this take on a cutting board style.
I soo love this cutting board.. I want to make some but just have not got to doing them yet... this gives me ideas and possibly the urge to make some sooner than later..
Good stuff man! Also, the moving camera shots were on-point. I know you guys put a lot of work into the vids and I wanted to let you know the small things are definitely noticed!
I saw your book at Lee Valley in Canada today! thought that was pretty cool
Awesome video! I really need to make some cutting boards!
I love your band saw !! I can't see the brand but I love the design !! It has the extra relief you need for tight spots!!
Just ordered your book. I know a lot about making them but I will flip through it . Maybe I will learn something I did not know. Love all the hard work you do . Your worth supporting 👍
Thank you John! Greatly appreciate that. 🙏♥️
Thanks David, I think I’ll make one or two of these for Mother’s Day!
Thanks for the video David! I have been thinking about bread board ends as another stylized, point of differentiation. This let me know I wasn't crazy haha. I will definitely be adding something like this to my lineup
I've done the breadboard style once. I didn't do the dowels though... no issues.
Great video and great book.
Just ordered the board book and the kitchen one. Can’t wait
oh thank you!!!!
“Sand in the place where you live” made my heart happy!
Going with the flow is the only way to go. Projects always have hiccups, changes, etc
This is a damn nice cutting board
That’s one sexy cutting board.
And I like how you compensate when you pitch a curve to yourself.
Hello David. My bf had this video on hold for me to watch and I was shocked to see the building I realize “Kencraft”. Me and my bf r from Toledo area. I was at Kencraft couple weeks ago I was very pleased with the price of the wood. Next time, I stopped in there I hope to see u. Great video.
Awesome! Kencraft is good people!
amazing design and i just ordered your books
Thank you!!
Great one sir! Now, the question is, will you be giving this board to your mom and have her store it with the endgrain one you gave her? Most top tier (mostly endgrain) boards I’ve made, tends to be used as show pieces for food serving instead of being used as the work horse cutting board they should be used for. Everyone that gets one says it’s too nice to cut on haha! 👍👍
That’s the hardwood dealer I shop at for my hardwoods!!!! They are awesome and reasonable. Enjoy the cutting board videos
I will be getting your cutting board book for Christmas
I made some pretty good cash doing custom orders on edge grain cutting boards. I don’t even have a table saw but I was able to do it all with my bandsaw and plainer.
I did an audible cheer at the return of the "sand in the place where you live" full line! Makes me wonder what sliding dovetails would look like on the ends, but I'm probably far from the first person to think that.
now I want to do a sliding dovetail one!
I do cutting boards and sell at local farmer's markets. I've reached a point where I'm making money even after spending it on non-woodworking things I wanted. The best thing is I don't have to do it every weekend, just when I feel like it.
that is the best! No pressure and just when you feel like it!
Amazing video
Hey, im in Toledo and starting woodworking. Never heard of kencraft, ill check them out
I like this. I’d like to use a mortising bit to cut a square then toss in square dowels. Just to use square dowels and skip a step.
I like that Idea!
First timer! Lol. Thanks for the content.
I absolutely love your books and work brother! I’m just missing one book….the kitchen one. As soon as I can make some money, I’ll buy it….promise!
Thank you Bryan!
Awesome vid as always. I own 2/3 of those books. Must own 3/3 lol. Out of curiosity what do you use for your video recording equipment? Specifically your camera and microphone? You always produce such high quality and engaging videos. I know most of it is just talent and experience but I'm looking to start making some guitar building, modifying, repairing and setup videos and need a camera and mic setup better than my iPhone but without being several thousand dollars to start lol
Looks beefy and fantastic. Nice job
Beeftastic!
Confession: I think I like the larger dowels
Beautiful, beautiful and beautiful
i bought your book and built some cutting boards:-)
one i gave to my mother and she never needed it until now:-)lol
ive never seen cutting boards with tenons and dowels, and i love it. also, im never gonna hear that REM song the same lol.
I feel like since your stock came out a little thicker, the larger dowels match better. That chamfer on the ends is doing the work of a Dutch bevel, and the whole thing looks like a wonderful tiny table.
Awesome, great board, great song, and a new logo I see. I dig it, or I make it, lol
Very nice thanks for sharing. How much do you sell them for? If you don’t mind
Ordering 3 books right now.
Pinched finger tips under a heavy board can be pretty painful. I dropped a board a few inches onto the end of my finger tips once (before board was finished)... brought tears to my eyes. I usually route a finger pocket on the bottom at both ends but finishing them is extra time. The chamfered edge is an interesting alternative.
David love your videos and instructions. Great looking cutting board, thank you. Scott
Thanks Scott!
Classic Picciuto... PS: I still love your mural wall. PPS: Nice thumbnail!
Every time I sand now… R.E.M… in my head.
Curious why/when you stopped using the dust cover brush with the blade guard on the table saw? Was the dust collection not effective or is it more about making the cut visible on camera?
“Cool focus bro” 🤣
Do you have a brood of minions keeping that area behind you so tidy while filming?
lol
Just one minion!
My wife also has a cutting board I made for her 8 years ago…still sitting in the pantry. 😑 lol
Thats super awesome! I have a question? Can you make those joints on a router table? Thanks
I haven’t done it myself but yes!
I see those feet are from the orange box store. Are those stainless screws. I always swap them out cause I don't see it say stainless
Picciuto: master of the segue
Eu fiz uma toda trabalhada pra minha advogada e aconteceu a mesma coisa de não usar por pena de riscar hahaha.
awesome board. Quick question. How much would you charge for that board?
Do you not raise the grain of the wood before finishing because of the type of wood you used?
I've made lots of cutting boards and butcher blocks over the past couple years. I just give them away to friends/family. Lots of people tell me I could sell them to make some money. I don't think people realize how much the materials cost, and the time that goes into them, especially for the end-grain. Heck, they probably have no idea how much oil an unseasoned end grain butcher block soaks up. I doubt people would pay what I would have to charge to make it worthwhile as business. I know there are economies of scale making several at once, and the idea is somewhat intriguing, but so far I've discarded it as an idea to make some money.
When I worked retail, my boss taught me something about making display piles: never let it be a perfect stack. You always make a nice stack of boxes, squares up and everything…then you take one out of the corner and put it on top. People don’t like breaking that perfect cube of a stack
I bet your mom wouldn’t break the cube (that sounds like an insult but isn’t meant to be)
I recently made my first end grain cutting board, but it wobbles. Can’t seem to figure out howto fix this, sanding doesn’t seem to affect it. Maybe with some feet that allow me to install then a bit off?
This was a great video, but the tip about putting the mitre guge in from behind blew my mind.
5:44. Why don’t you get a dowel making jig and make your own dowels? You could have used the maple dowels in that walnut end.
I made this board from your book for my folks for Christmas. They refuse to use it. It’s a show piece apparently
Ha! That happens!
When I started up several years back, you were one of my prime sources for ideas. One of my best-selling products has been the wine caddy. I actually do more sales on smaller pieces like that at shows, and while the cutting boards are the big draw, I am definitely trying to bring the people in for some of the bigger ticket items.
I just picked up a cnc so that I can also do custom engravings, plus batching out cribbage, tic tac toe, and other small products.
Do I need your books now? No, but I am giving back to you for giving so much to all of us.
Bob, All American Woodworking. (I do not do "content", as I have a face for radio and a voice for the silent movies)
Oh man, thank you!
What brand clamps are those?
Dang, I haven't been here in a minute. The lack of beard was a shock!
@9:05 Wait..You turned your miter gauge around? Huh. I guess as long as you press against it. Interesting. I'm sitting here thinking "Why didn't I think of that??"
Great video! Is there any way to get your book in digital format? 💪🏻
Thank you. Unfortunately not at this time.
was I the only one singing "sand in the place where you live" before the music started?
What would you think about the pros/cons of making the end pieces thicker than the middle section. Effectively raising the middle off the work top.
Yay? Nay?
I like the way you think! Could be a cool design choice.
Thinking a cove cut where the pieces meet would be advantages. Easier to wipe clean with no corners. IMHO
Where do I buy the book?
I love your channel, man. Been watching since you were drunken!
🙏
Why stop there? Wooden veggie knives, wooden tongs, wooden spoons salad forks wooden bowls. Don't need a lathe just an Angle grinder. All in matching woods? Great video BTW
When I gave my mom her first cutting board from my woodworking, I caught her using it with a plastic cutting board on top of it cause it was “too pretty to mark up”. I LOL’d pretty hard and then convinced her to just use the thing!
hahaha! That's great!
Another great video! I do love making cutting boards and they have been good sellers so far. I do disagree with you David. Thickness Matters 👀😜😳👀
😮 thanks Sandy!
damn dude your like a damn genius