TM G17 Problem - JAMMING ISSUE Part 1 - Barrel Tilt Issue
Vložit
- čas přidán 27. 08. 2024
- note : the barrel tilt/jam is only one of many reasons why your slide can jam itself up. i will teach you how to...
1 identify if you have the issue
2 explain why it happens
3 how to fix
4 my encounters/experience with this problem
Please feel free to correct, challenge, suggest, or propose a method of fixing the issue.
please also fell free to comment, like, and subscribe!
i also have an FB page here : / 1468731500063861
THANK YOU SO MUCH, FINALLY AFTER YEARS I FOUND A VIDEO THAT CAN FIX MY JAMMING GLOCK
I had this problem for months, and finally with this video I solved it. Very nice video, thanks !!!
Thanks a lot man!!!! I live in South Korea and this place's gun shops are crazy about money so that they want me to pay over $50 to fix this problem... But you made me fix this by myself!!!
Great vid, just got used WE G17 and the slide felt really slugish, and jammed when racking the slide/ releasing it, now it works like a charm.
were is the other video with the other problem jamming issue ?
Great Vid! I literally just encounter this problem on my prime SAI COSTA RMR slide for 18c
Will this also apply to the WE G19 by chance? Im having the same half jam issue.
I have this exact same issue, with a guarder complete frame set and TTI Nova slide/outer + guarder inner barrel set, I haven't done any filing to remedy it yet but will give it a go in the next couple of days
I've seen at least 10 people with this issue in the last month. I've linked them this video and everyone has been fixed.
lol haha XD XD
good man! :) TM G17 masterrace hoorah.
best regards,
RS087
20 times... people do not know how to research their guns
will hicks lol hahah XD
Great video. Thanks!
Very good video. Thanks!
I noticed when you dissassebled that you were missing that spring stop off your recoil spring. does that make the cycle smoother or did it just break?
my issue was the opening on the slide where the barrel goes thru was uneven causing the bottom of the barrel to rub. easy way to check is rack the gun upside down.
how many versions does marui g18c have？
My bb loader keeps sliding forward and jamming any ideas on how to fix it
@@anonymousanonymous5832 I have to force it forward
Did you fix it ?
The ace1arms barrel has the same issue
What if my slide gets stuck but the outer barrel can move while it’s stuck?
Frfr
I have an issue with the slide breaking where the outer barrel meets the slide on the right rear end. I think I can fix the problem by taking some material off the outer barrel
can also happen on tokyo marui ootb?
when it halfjams and I tap the barrel, the slide doesn't move, what ere the other things that may cause this, because I would really like to resolve my halfjam issues but checked like you said and it wasn't the barrel
maybe the rotor issue?
@@RogueSystem087 I’m not really an air soft guy, I got the g17 from my uncle, so I have no idea what that is, sry, but I’ll look into it
I appreciate you
what if my barrel tilt issue is when the slide is all the way back? if I push it forward the slide will release so it is due to the barrel for sure.. but I've already sanded the barrel down like you've shown in the video.. what suggestions can u give me?
+RogueSystem807 Umm.. My stark arms g19 does this but it is not the barrel tilt issue. I thought you were going to make another video to address people who are having the same issue as me. Please help, I am worried.
is there odd wear on the inside top of your slide? this was happening to me. got a good gun solvent and was able to remove a lot of aluminum fouling that came from the barrel. it built up and then 'gummed' up against the barrel. wiped that away and the original slide finish was underneath.
Yeah I'm having the slide jam problem and it's not the barrel. The barrel is quite loose actually. Even when jammed I'm able to wiggle the barrel and the slide won't move. There's definitely a grinding feeling as its going through the section where it would happen, but I can't see any sign of where the friction is
did everything and the issue still exist... it happens both at the end of the cycle and also just before it finishes
Hello can u plz help me, my glock 17 turned into automatic, how to put it back in semi
your sear has worn out. it needs to be replaced.
will hicks ok thanks
🤣 wtf
thanks
I didn't realise that the glocks have so much issues, in compare to desert eagles designs on airsoft doesn' have issues, i have the kwc and the new WE desert E. And the basic design don't have much problems like airsoft glock design
Mine still jams up but it isn't the barrel
thanks m8
Hey bro help me.. is tokyo marui barrel fit on elite force glock?
No
Use google
why would this happen only when I have a tracer unit on the end
Because the tracer adds down force to your outer barrel, forcing it up toward your slide, making it stuck. Airsoft glocks are ill suited for supressors and tracera. Just not meant to be, sorry. Put the tracer on your rifle.
His solution taking out the mag after a jam means there's a round in the chamber tap on the end of the barrel with your finger don't thing so bro !!
Its Airsoft my guy, not a real bullet in the chamber..
Why do so many airsoft and even real gun-nuts on youtube sound absolutely terrified?
i can't speak for others, but youtube helps me learn for presentations in real life, that's partly the reason why i started the channel. Depends from person to person
Hi I have a similar issue but it is the exact opposite. My outer barrel does not tilt upwards enough, causing the side to catch on the bottom of the barrel. If i push in or up on the barrel the slide returns, but it happens every 2 or 3 shots. Any idea how to fix this?
+nathan chappell I had the same problem. The outer barrel wore the slide down to a point where the slide would catch on the outer barrel. The only solution is to buy a new slide. What material/ metal is you barrel made of?
I actually figured it out already! Filling down the point he talked about in the video solved it.
我的滑套也一卡一卡的
Why bother with Glock garbage? Get a decent gun.