Wish I had a junkyard like that near me! Been looking for a 242 transfer case for a swap out rebuild on a 249. That's a project!!! Good day good parts for you.
Great video Dan I have a 98 XJ and you sure have shown m some helpful hints for doing things. Stay safe and above all May The LORD keep you safe, John 3:16
Can you take the door card off and spray the threads from the inside of the door? Might get to the threads faster. Ps did you check the rear tailgate interior trim??!!!!??
Hi....that's great work done by you and hope you will keep it... I am from Pakiatan... I have recently purchased a cherokee jeep XJ...its awesome but some parts are missing. Can you people do shipments
yeah this yard isn't really a U pull. I'm pretty sure you're not allowed to pull your own parts in New York State lol.. when you ask for a part on the undercarriage they usually come in with a forklift and take it out for you
Good stuff there! Have you ever tried sea foam deep creep? It changed my life haha. So much better than PB blaster and WD in my opinion. Smells great too. 🍻✌️
Yes! I unseized a 4.0 motor with it! I bring the WD to the yard because it has that silly folding straw.. it helps not loose the straw in the yard. Lol!
Going to the yard tomorrow to get some parts for my 96 se, long story short one owner "sheriffs office" bought new however I am having the hardest time figuring out if its a true police package, dont really care either way, but wanting to obviously replace all suspension, it has skid plate in the front and over the gas tank other than that to me it seems like a regular xj, whats the best way to tell? I have done vin searches, title is normal, would the rear drum size be the best giveaway ?
There was no "standard" police package. Most police options include 120 MPH speedo, Ext Idle switch button, D35 rear w/ ABS, rubber floor mats, economy wheels, no roof rack, larger ribbed rear drum brakes, Skid plate package, trans cooler... some had push bars, and an extra map light... so on
I want to start off by saying I love your content. You and d& e in the garage are the reason I bought a wj. The oil pressure gauge keeps dropping to zero when it gets heat in it! I replaced the oil sending unit with a factory oem mopar one but it still did not fix the problem. The wj is from Scottsdale Arizona with 159000 miles and the motor ( 4.0l ) sounds and idles perfect. Do you have any suggestions? Oh and how do i buy some of your merch?
Hey Eddie! Thanks so much for watching! Did you replace the oil sensor too? Send me a PayPal donation to airvillan2000@aol.com and I'll send you some stickers! Thanks brother
@@ProjectDanH I heard that.. you know I had to throw that out there because of the NY hat..💪 your content and videos are always 🔥 and I always smash the like button for ya👍
The Sox... they Sux... went to Fenway couple weeks ago on some freebies... you think they could at least win one for my kids... nope... but yeah... boycott away!
Hey Dan, I really enjoy your videos. I am looking for some 2001 OEM XJ door pockets. They seem to be rare. My XJ had them at some point.but gone now. Any ideas? Thanks and keep the videos coming.
Hey Bob, They are very rare. XJ door pockets were only on the limited door panels with the wood grain.. find a limited part out and you'll find your door panels
@@ProjectDanH Yes that is what I have but there are just holes where the pockets used to be. If you happen to run across any let me know and I will try to get them. Thanks so much for the reply.
the bottom interior lift gate sill? I've been looking for years for an unbroken one! I finally found a good one in this XJ. I was gonna film it but it was pulled already and sitting in the back seat
Around how much does that stuff cost you from the junk yard I had a chance to buy a ZJ for 300 before they sent it to the junk yard but I could not get too it
Just a brief question for you off subject from your videobut what I would like to know is if I remove the AC condenser on my Jeepand run a bypass pulley and replacement of the AC compressor would it be okay leaving the condenser out when I rebuild my Jeep let me know thank you
I don't see why that wouldn't work. youll just have to make sure you get the right tension on your belt. also you may want to have a mechanic recover your Freon.
I have one more question for you have you ever come across a transmission on a Jeep where the two top bolts on the transmission we're regular bolts instead of the special ones I've been seeing in the videos
blessed be the name of God forever and ever, for wisdom and might are his.
Amen!
Nice score buddy.You got lucky on those door hinge bolts.👊
Sure did Dano!
o man i need that P side front door
it's rotting on the bottom or I would have taken it. lol
video nicely done - informative and entertaining as always !
I appreciate that.. thank you
Wish I had a junkyard like that near me! Been looking for a 242 transfer case for a swap out rebuild on a 249. That's a project!!! Good day good parts for you.
Yes, was a great day.. Nice build! I wish you luck with it 💪
Awesome video as usual. Love the pro tips. Reminds me that I need to get out to a yard.
Thanks man! The yard definitely sharpens the skills! Lol
Great job on saving those parts
Thanks brother!
Another great video Dan 🇺🇸
Thanks Paul!
My wife and I both watch your videos because they’re not only informative but entertaining 🤠
Nancy is from Cohoes near Albany .
@@myjeepwjarebuildpaulsteven7986 Thanks Paul! I really appreciate you guys watching, especially together!. I wish my wife would watch my vids 🤣🤣
Great Score for sure!!!
Thanks Rob!
Great video but how does that yard expect someone to get parts from underneath the vehicle when it’s just sitting on its axles in the dirt.
I know, it sux.. theyll fork lift it up for you if you need
Awesome video keep up the content
Appreciate it, will do!
Working on a 1998 chevy silverado k2500 to make it better
Awesome man!
I am from Saudi Arabia and I have three jeep xj .
All of them 1998. One of them is broken.
I take from him parts for others .
wow. awesome man! every jeep needs a good parts jeep 🤣 god bless you !🙏
Great video Dan I have a 98 XJ and you sure have shown m some helpful hints for doing things.
Stay safe and above all May The LORD keep you safe, John 3:16
Thank you brother!! God bless!
Can you take the door card off and spray the threads from the inside of the door? Might get to the threads faster. Ps did you check the rear tailgate interior trim??!!!!??
Yes, that's a great idea! I did, it was in great shape! It's mine now 😉
I hope i have a near junkyard with parts and nice prices for my cherokee xj like yours!
Lol .. I love this yard!
I took the front differential off that red xj at the end of the video lol
lol That's awesome!
Hi....that's great work done by you and hope you will keep it...
I am from Pakiatan...
I have recently purchased a cherokee jeep XJ...its awesome but some parts are missing. Can you people do shipments
Thank you! Which parts? shipping is usually expensive so its best that they are small.
Do you need a Police push bar for the front of your Police project? Got one here in MN.
OMG yes please! message me on Instagram. @project_danh
@@ProjectDanH I'm not on Instagram. Any other way to get ahold of you?
@@jackpinesavagemn dhartman.mail@gmail.com
@@ProjectDanH Got it, email sent.
That salvage yard makes it hard to get anything off the bottom side of any of those vehicles.
yeah this yard isn't really a U pull. I'm pretty sure you're not allowed to pull your own parts in New York State lol.. when you ask for a part on the undercarriage they usually come in with a forklift and take it out for you
Awesome video. Now I know how to take off the doors. PITA for sure. I know the jeep had no wheels but you sure made it look short, how tall are you?
lol. 6'3" 275.. big boy 😁💪
Good stuff there! Have you ever tried sea foam deep creep? It changed my life haha. So much better than PB blaster and WD in my opinion. Smells great too. 🍻✌️
Yes! I unseized a 4.0 motor with it! I bring the WD to the yard because it has that silly folding straw.. it helps not loose the straw in the yard. Lol!
@@ProjectDanH very true!
Niiice Dan
Now where's that yard again🤔
Eastport, Suffolk county NY 😁
@@ProjectDanH sweet can u give me the address?
I live in ny
@@mclehed77 Peconic Auto Wreckers
(631) 325-0022
maps.app.goo.gl/UDNd21Xhnh6SHKPz5
Going to the yard tomorrow to get some parts for my 96 se, long story short one owner "sheriffs office" bought new however I am having the hardest time figuring out if its a true police package, dont really care either way, but wanting to obviously replace all suspension, it has skid plate in the front and over the gas tank other than that to me it seems like a regular xj, whats the best way to tell? I have done vin searches, title is normal, would the rear drum size be the best giveaway ?
There was no "standard" police package. Most police options include 120 MPH speedo, Ext Idle switch button, D35 rear w/ ABS, rubber floor mats, economy wheels, no roof rack, larger ribbed rear drum brakes, Skid plate package, trans cooler... some had push bars, and an extra map light... so on
@@ProjectDanH THANK YOU ❤️
I need that steering wheel ,is that junkyard anywhere close to Roslyn
It's about an hour and 20 minutes from Roslyn.. But it's gone now ☹️
I want to start off by saying I love your content. You and d& e in the garage are the reason I bought a wj.
The oil pressure gauge keeps dropping to zero when it gets heat in it!
I replaced the oil sending unit with a factory oem mopar one but it still did not fix the problem.
The wj is from Scottsdale Arizona with 159000 miles and the motor ( 4.0l ) sounds and idles perfect.
Do you have any suggestions?
Oh and how do i buy some of your merch?
Hey Eddie! Thanks so much for watching! Did you replace the oil sensor too? Send me a PayPal donation to airvillan2000@aol.com and I'll send you some stickers! Thanks brother
@@ProjectDanH I just did
looking forward on putting one on my wj
Piglet: What day is it?
Poo: Junk yard day
Piglet: My favorite day
How's those Yankees doing with the SOX..?? Just asking for a friend 😂🤣
Cheers Mate 💪🏻
I'm a boycotting all major league sports.. haven't watched a single game this year. ☹️
@@ProjectDanH I heard that.. you know I had to throw that out there because of the NY hat..💪 your content and videos are always 🔥 and I always smash the like button for ya👍
The Sox... they Sux... went to Fenway couple weeks ago on some freebies... you think they could at least win one for my kids... nope... but yeah... boycott away!
@@michaellord3571 thank brother! Much appreciated. I look forward to a good yanks sox game next year! 👍
@@Deadbuck73 I Absolutely love the city of Boston and games at Fenway 💪
Hey Dan, I really enjoy your videos.
I am looking for some 2001 OEM XJ door pockets. They seem to be rare. My XJ had them at some point.but gone now. Any ideas?
Thanks and keep the videos coming.
Hey Bob, They are very rare. XJ door pockets were only on the limited door panels with the wood grain.. find a limited part out and you'll find your door panels
@@ProjectDanH Yes that is what I have but there are just holes where the pockets used to be. If you happen to run across any let me know and I will try to get them. Thanks so much for the reply.
@@hdbobt you got it bob.. set an ebay search. It will alert you when they come up
Nice parts! Looks like project zipties cousin lol 😂
Haha yeah they were great! Zip ties cousin indeed! At least you're able to save zipper... This poor XJ was dumped ☹️
@@ProjectDanH hopefully I do it justice. This build is getting extreme
@@TheBeardedJeeper I love it dude! Your killing it. Can't wait to see what you rig up with the exo cage
dang i couldve used that door. mines starting to rust at the bottom from demo
there is a Red rust free passenger door there
I am looking for tailgate moulding for my xj I tried every where unfortunately I have not find it would you help me with it please?
the bottom interior lift gate sill? I've been looking for years for an unbroken one! I finally found a good one in this XJ. I was gonna film it but it was pulled already and sitting in the back seat
look around for z j
None
@@ProjectDanH how come no body has z j stuff
Around how much does that stuff cost you from the junk yard I had a chance to buy a ZJ for 300 before they sent it to the junk yard but I could not get too it
If you're a frequent flyer and pay cash like I do can probably score all the parts that I just got for around 300 to $400
I need the power steering
It was gone 🤣
Is this in LI? I’m in Brooklyn and can’t find any good XJ parts around here.
Eastport, Suffolk county NY 😁
is there a lot of z j stuff there
None
Just a brief question for you off subject from your videobut what I would like to know is if I remove the AC condenser on my Jeepand run a bypass pulley and replacement of the AC compressor would it be okay leaving the condenser out when I rebuild my Jeep let me know thank you
I don't see why that wouldn't work. youll just have to make sure you get the right tension on your belt. also you may want to have a mechanic recover your Freon.
@@ProjectDanH the freon is gone thank you for your help
I have one more question for you have you ever come across a transmission on a Jeep where the two top bolts on the transmission we're regular bolts instead of the special ones I've been seeing in the videos
I'll pay you to pull me a 98XJ instrument cluster harness, both left and right, I need at least14 inches
I'll keep an eye out brother. 👍
I appreciate it, my XJs been down a month already.