What 6 Different Instrument Cluster Layouts Does BMW's M340i Have? Bimmercode Tutorial Reveals All!
Vložit
- čas přidán 14. 03. 2023
- Bimmercode offers a ton of great features. One of which being the ability to change the display of your instrument cluster. In this video I wanted to run through the 6 different layouts available particularly for my G20 M340i, and the differences between them, all while offering general best practices for coding.
Coding completed using the @KiesMotorsports WiFi E-Net adapter. 10/10 recommend!
This video is not sponsored by Bimmercode*
.
.
.
Filming equipment used for my video production:
Camera with lens: amzn.to/3OcYae6
Camera SD Card: amzn.to/3SqvO2q
ND Filter: amzn.to/3Sr1g0D
Extra Sony Battery: amzn.to/48KGizl
Wireless Mic: amzn.to/3HzDEQY
Lav Mic: amzn.to/491ZecP
Shotgun Mic: amzn.to/48KFlal
Camera Gimbal: amzn.to/3u3dlzC
Gimbal Handle: amzn.to/42bWRSh
Drone: amzn.to/3OaJxIc
Drone SD Card: amzn.to/48ItfyF
Drone ND Filter: amzn.to/4b3Vuct
Gear Backpack: amzn.to/3HwsfkY
Camera Suction Mount: amzn.to/426DQAV
Tools in my garage:
Low Profile Floor Jack: amzn.to/42c27W9
Low Profile Ramps: amzn.to/3u32Lc2
Low Profile Wheel Chocks: amzn.to/3vUYJmn
Jack Stands: amzn.to/4b88opN
DISCLAIMER: Links listed in this description might be affiliate links. If you purchase a product or service with the links provided here, I may receive a small commission. There is NO additional charge to you! This helps my channel to continually grow so the best content can be produced for the viewers. Thank you for your support! - Auta a dopravní prostředky
Great video, does this change UI elements on the HUD as well?
Thank you! 🙏 and I believe the HUD interface is customizable but only in expert mode while coding using Bimmercode. I may be wrong, but I believe this is the case. Also, I don’t think the M layout via HUD is available for all models. So it definitely depends on what model you have. Hope this helps 👍🏼
Thanks for the tip man. Just a quick question, at the end of the video when u said have the car running u mean by having the engine running and everything on just being on park. At that time am I still able/is it necessary to press the start/stop button 3 times for diagnostic mode?
Good question. So to clarify on that point! I was referencing having the battery at a sufficient charge prior to starting your coding session. If you know your battery is in good shape (newer and/or charged fully) or it’s been on a trickle charger, then you have no concern as the coding software these days are way faster than it used to be. IF your car has been sitting for a while, or, weak battery then I was saying you may want to drive the car for a while to place a charge on the battery. Diagnostic mode should be entered when engine is off, in park, and battery at a sufficient charged state. 👍🏼
How do you turn off the trip calculator display on M340i? I accidentally hit it and all I can do is get it to toggle through the diff calculations, but I don’t know how to turn off the trip calculator and make it go away so that it goes back to the standard instrument cluster display.
Have you tried toggling using the BC button on the high beam indicator (left side of steering wheel)?
So I have an m340 as well 2022 mine just says m how’d you get the 3.0 cs
Hmm. 2022 is still ID 7, correct? Or is yours ID8? Also, the 3.0 showed up on mine simply because it wasn’t a full M car so it displayed as standard. It should show under one of the M displays…. Unless an update has changed this since the time of filming this video. That may be the case!
Is there any way to have the Alpina display without the Alpina logo and instead an M340i logo, M logo, or no logo at all
Not that I’m aware of. Possibly in expert mode, but I did not explore that option
Is there anyway to add (customize) the tires PSI info on the right side of this dash on my 2023 BMW M340i sedan?
My 2022 MB AMG GLE 53 does have this option and I like it a lot, as my BMW does not have any spare tire and this PSI info will be very helpful.
Hi, I believe the M340 should offer pressure monitoring within the Idrive 8. Does yours not show? I know only M cars offer tire temps, but pressure should be standard within the instrument cluster.
Great video. Question, after coding in the different instrument clusters do you think the fuel gauge is correct? I have a 21’ 330i and I coded in the M performance 160 cluster and I’m not sure if my fuel gauge is accurate anymore. I noticed the needle dropped a bit from the position it was in before the coding. Also the digital range number dropped as well. In my case it went from 311 miles to 260 after coding.
So it’s not only for Ms ? I have a 330i would it work for mine ? I have a 2020
Once you coded your 330i into M Performance package the system expects you to drive like crazy, hence it shows the shorter range... ;-)
Thank you 🙏 and interesting observation. I never noticed a difference with my fuel gauge, however, I do know that the visual graphics are different from layout to layout so it may just appear lower but in reality the fuel level never changed. If that makes sense?
@@Reallydiorrrabsolutely it would work for your 300i. I also had a 330 previously and this worked perfectly 👍🏼
@@jacekstaszewskimdt4944😂
I am wondering. I would just want the layout to change to M sport mode gauge only when in Sport mode. Like when you put it in sport plus the screen is totally different on a M car.
Well the screen will change to a visually different layout in each mode, depending on what you select, the same as OEM. The difference is that this allows you to access an array of different options not provided in the OE screen, but available for your model (or other models)
For the M you can change the 3.0 CSL to anthing you want (as long as its a real M car) and if you go into DZM_variante and set it to S63 it shows an RPM
The M Sport also shows the M stripes next to the speed limit info
Thanks for the insight! Unfortunately, my m340i wasn’t a full M car so I couldn’t take advantage of changing the icon but this is good to know!
@@legacydriven Miscommunication sorry about that. What I mean by as long as it’s a real M car is like M2, 3, 4, 5, 8, X3 M, X4 M, X5 M, and X6 M. Don’t think you can code M340i with the M layout. You could try tho!
@@justa4s_ definitely, I gotcha! 👊🏼
@@legacydrivenare you able to have it keep the m340i at the top but also have the 200mph on the dash and the map still in the screen?
@@samuelfreericks168 So the map is a separate variant of the cluster as it can be adjusted via Idrive. The M340i and 200mph are also separate from each other I believe, but, as mentioned previously I do think this can altered within expert mode (customized) but just be cautious as expert mode allows for a slew of customizations that can quickly become an issue if you’re not experienced 👍🏼
What year is ur car. Also can I do this for a 2022 m240i g42?
This is a 2020 G20 M340i, and yes! The foundation of functionality is the same for the G42 👍🏼
Is the check engine light caused by Bimmercode?
Hey, yeah so if you’re referring to the CEL light you see in this video? If so, yes, it comes on when the car is in diagnostic mode. Once you’ve completed your coding, and you back out of diagnostic mode (shut the car off), the CEL when turn off and clear itself 👍🏼
Can you use the Kies adapter to code an M340i...to turn off the Auto Start feature when coming to a complete stop in the Eco mode?
Hi, so the M340i has the auto start/stop button in the center control panel which is the easiest way to turn off that feature. Alternatively any of the sport modes automatically deactivate auto start/stop as well. Regarding eco pro mode. I’m not sure that is possible via coding. It may have to be done through expert mode inside of Bimmercode. However, anyone using eco mode most likely wants to utilize auto/start stop.
Could you tell me how to code virtual driver view
Virtual driver view?
@@legacydriven yes it shows you live traffic around you when you have driver assistance on it's in there on newer models after 2019
@@peterpetru1032 understood. So that is based on driver assistance package. If you have that, and the accompanying sensors you should be good. Otherwise, I don’t believe you can code this in with Bimmercode. Hope this helps!
M layout on my 2022 430i Xdrive Just has M at the top, no M4, or 4.0 CSL.
Do you have idrive8?
@@legacydrivenI drive 7. To change the name now you have to go under expert mode and you can select any modern BMW name.
@@known3617 ok that’s what I thought! Thanks for sharing on here 👊🏼
Does it work for a 22 G07?
Yes absolutely. I believe the ‘22 G07 still has iDrive 7 so it should be very similar. In the basic mode you obviously won’t get an M340i screen (or similar) but you can access the standard M sport visuals etc 👍🏼
Can you still get tuned with one of these
Certainly! This is only aesthetic 👍🏼 and won’t change performance characteristics
Will you loss warranty for this trick?
Not that I’m aware of, no. This is not interfering with any diagnostic or engine coding and does not change how the car performs. It’s simply a visual alternative that you’re unlocking within the controller that was not provided by BMW from the factory for your specific car BUT is BMW compatible given it’s their layout.
does the ECU need to be unlocked to do this?
No it does not 👍🏼
@@legacydriven ty 👍❤️
@@logical8470 you’re welcome 👊🏼
does this make your car really go to 200 mph?
No, certainly not. Just gives you that sport dash used by the M models
Do any of them have a startup animation when you open the door like on the G80/G82?
Yes, you can code the ‘ Bmw M ‘ animation at startup / power off
Correct 👆🏼
Background music too loud
I appreciate the feedback 👍🏼