Steeda S550 GT/GT350 Mustang Road Race Front K-Member | Review
Vložit
- čas přidán 19. 08. 2020
- www.steeda.com/steeda-555-506...
In this video, we give you a complete overview of our highly engineered #S550Mustang Road Racing #KMember. Over the years, we have pushed 2015 to present Mustang to the absolute edge of performance. Our racing program has developed vital components to aid your S550 Mustang to form a rigidity, structural, and weight reduction standpoint. It is precisely what the Road Racing K-Member does to your S550 pony to give you the edge whether you're on track or at your favorite canyon road.
Subscribe: bit.ly/Steeda_YT
Shop Ford performance parts at www.Steeda.com!
Purchase these parts directly from Steeda:
Part Number: 555 5061
MPN: 555-5061
---
Steeda Website:
www.steeda.com
Steeda Performance Vehicles
www.steedavehicles.com
Steeda Europe:
www.steeda.co.uk
Steeda Pinterest:
/ pins
Steeda Facebook:
/ steedaautosports
Steeda Instagram:
/ steedaautosports
Steeda Twitter:
/ steedaautosport
Steeda Blog:
www.steedablog.com/
#MustangParts #MustangRacing #6GMustang #MustangKMember #Steeda #SpeedMatters - Auta a dopravní prostředky
I have an addiction. Its dropping my Shelby off at Steeda and getting it back better. I cant stop.
We'll be sure to take good care of her, Walt!
Great work guys! Looking forward to adding this to my list of Steeda parts!
Just ordered mine today through Power By The Hour! Can't wait to get it on the car!
I currently have the extreme g trac brace, I will be upgrading to the road race k member. Can't wait!!
Excellent video Steeda . . . Stay Frosty .
It's on my list, just installed the extreme g trac.
I have this on my 2018 RS2 it's great! I highly recommend to anyone.
Steeda is winning!
3:53. You notice the pause. What he meant is 1,2,3 roll racing on the interstate highways
Hey Brian, I am new to your channel. I have a 2020 PP2, I am planning on lowering it with Steeda 1” all around plus front camber plates. Any suggestions on how to go about it or will that create issues? Thanks.
Wish Steeda had one for the 05 S197
you mention people with hellion kit using this k-member. What are they doing with the intercooler mounting? The stock k-member has an extension past where the radiator sits that this k-member does not. Thanks
Why don't you guys make a kmember for the S197 platform?
I have a lot of BMR suspension parts. Will this be compatible?
Will this work on a 2020 gt500
I want to add the k member but I have kooks 1-7/8 long tubes. Will all this work together?
I was wondering if it would allow my long tubes to clear the steering rack.
Hey Brian, what size EC7 wheels and what size Hoosier R7's are you running for the Yellow #20 SCCA race car?? Im looking into a square R7 setup for HPDE/Track days.
Those are 18x11 ET52 square with a 1” spacer up front! 👍
315/30/18 Hoosier R7's I would assume? I just added this RR K member / Lateral and Tensions with bearings, adj engine mounts lowest setting and the BS kit. Im expecting it to work well with my Steeda Camper plates, MR DR springs, steeda controller, Stop the hop RR kit with lower arm spherical bearings, billet camber arms and Adj. bars and end links. The only non steeda suspension parts on my Mach 1 are the orig MR dampers. @@steedaautosports
🏁👍
Does this work on the 2015-2017 V6 as well?
We have never tested it on the V6 model before.
Dumb question but would this fit the v6? I'm thinking about building a "1le" v6 mustang and weight loss is major over the v8 cars. If I can get the var under 3400 lbs we'd have a good starting point
It's not advertised to fit the V6, but anything will fit with the right modifications!
Is this street legal, and safe to daily driver on streets with imperfections ie potholes, bumps, etc
Not sure their rear one destroys my alignment and makes my shock work wayyyy too hard
It comes with big ass zip ties so you can still use your belly pan
So this replaces the original k member?
Yes, it does! -Chris
I want this @brian
Can you order it in different colors?
I would say call in and ask when you order one, sometimes the factory can accommodate you depending on the color. Those were prototypes for our competition test vehicles.
My man is talking about steel and strength.. tries to slide in the zip tie aspect of this build😅😅😅
🤔
Why are all your parts diff colors for gods sake man!! Stick to steeda BLUE for everything CONSISTENCY