DIY Ultimate Work Bench - No Really! This is the One!
Vložit
- čas přidán 27. 08. 2024
- In this episode I am building a work bench with under top tool boxes and lots of storage.
I am using the Harbor Freight / US General 42" Tool Boxes and a butcher block top from Home Depot to make a 15' long one piece work station.
____________________________________________
Thanks for watching!!
Please Subscribe!
Please checkout my Amazon List (Store) to find all the Tools and Parts I use in the shop!
These Amazon items help support the channel and add no extra cost to you. Thanks for Shopping. As an Amazon Associate I earn from qualifying purchases.
www.amazon.com...
T-Shirts available:
Send $20 each or $55 for 3 to:
PayPal - jeffery@allisoncustoms.com
Get all the up to date info on Facebook. / allisoncustoms
AllisonCustoms.com
Questions@AllisonCustoms.com
Intro Music By:
Boston Rocks - Provided by StoryBlocks Audio
Open Highway - Silent Partner
Jon's on Fire - Silent Partner
Bustin Loose - Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
#AllisonCustoms #ac-pctv #workbench
Ended up here because I had the idea to build almost the exact same bench, just with a pair of harbor freight tool cabinets as pedestals with a maple bowling lane for a bench top… and the whole bench on castors… then I ended up looking through 6 years of videos trying to figure out where you got the shop stool!
Ha, I don’t think I even know where that came from at this point. Probably Amazon - thanks for visiting!
Thanks for sharing your tips and tricks. I am doing a similar build, this is good inspiration. You are giving me some ideas...
Thanks! I hope you end up liking yours as much as I like my setup.
looks great. I have 3 or 4 of these boxes to do the same to. Thanks for this video. You gave me the idea for mine now
I really love how much storage they provide.
you did all the wood buying just in time. 2021 wood prices are outta this world.
NO KIDDING!
Quite impressive. Great job on this project.
Thank You! I do like how it all came together!
I just picked up a can of WD 40 white lithium spray lubricant. sprayed on the bearing slides is a night and day difference. I will do every single drawer. Amazing ...I really like my us general even more now
Thanks for the tip! I’ll pick some up this week.
Nice setup! BTW, it is still Allison Customs t-shirt weather here.
THANK YOU! Its AC Sweat Shirt weather here. Might be AC Parka weather soon.
i believe instead of cutting that high $ nice bentch top would to fit the contours of the wall, i think i would put a piece of 1"x1/4" thick angle iron screwed to wall and put wall anchor screw to pull all bows out so it was a nice flat wall, tube frame would be 1 inch shorter in width but the bench top would still set on top of 1" angle steel and a line of caulking and nothing falls between wood and angle iron..
Great idea. I don’t think you would straighten the wall at all, but that would be a nice edging and very easy to chalk. Thanks for the idea!
Shop looks good.
ThankYou, I’m sure enjoying it.
Nice! (your sound levels are all over the place)
Thanks for the info, sometimes it’s hard to keep the microphone levels even with so much background noise. Thanks for watching!
Smooth looking finished product! I'd like to do something similar. How did you join the slabs together? Thanks!
They are just pushed tight together and glued. Ideally I would have been able to cut slots in it and use the clamps like used by counter top installers, but I didn’t even try. It has been just fine, so far.
Can I ask how high off the floor did the bench turn out to real nice build by the way
I believe my top is at 37”. I really like the look and I use it nearly every day.
I must have missed it, what size tube did you use?
1.5” square tube - I think it is 14ga
@@AllisonCustoms thank you
How high is the whole bench???
It’s right around 38” to the top. Perfect height for me when standing or using a stool.