How to Fix Rode Wireless Go II Noise Problem RFI Interference
Vložit
- čas přidán 9. 11. 2022
- 🎥How to Fix Rode Wireless Go II Noise Problem RFI Interference
♥️ Buy me coffee if you like.
If you do I'll probably go a bit mental, that might be fun to watch.
ko-fi.com/stanleyroubaix
🖼️ Follow me on Instagram.
/ stanleyroubaix
🤐 Facebook
/ stanleyroubaix
🦜 Twitter
/ stanleyroubaix
⭐ My Website
www.stanleyroubaix.com
www.aupfilms.com
🔨 My KIT LIST
kit.co/StanleyRoubaix
Some keyword goodness.
setlife,filmmaking,behindthescenes,film,onset,cinematography,filmmaker,
actor,director,cinematographer,bts,filmproduction,actorslife,cinema,
filming,production,filmcrew,photography,directorofphotography,movie,
videoproduction,filmmakers,filmlife,actress,movies,filmset,producer,
productionlife,hollywood,indiefilm,rode,wirelss,go,radio,wifi,microphone,
wireless,lavalier microphone,lav,lavalier,fault,flaw,design,problem,fix,issue,rfi,interference,
mobile,phone,noise,setlife residence club,setlife 1 - Zábava
Great straight forward video.
You just fixed a problem I have been having for a year thank you.
What a relief! I'm speechless! Thank you very much!
thank you. exactly what I was looking for. good video!
Worked perfectly. Thank you!
Thank you!
Thank you, Nobody knew what I was talking about....
OMG!! This is the exact problem I've been having. I've talked to Rode support numerous times and we've not come up with a fix. As soon as I get home I'm going to try this.
Thank you sir! 🤘😜
lets gooo this was the one. It was the pad setting I turned on
Thanks heaps mate! 👍🎉
Legend. Thank you
Thanks for this. I only have this issue with my FX3, not with the A7S III
Thank you so much! This was very helpful!!!! :)
Review coming up this week compared to hollyland version
Thank you very much!
You deserve a round of applause. Rode if you're watching, fix it.
I told them before I made the video. They don't seem to care
Thank you so much 🙏
thaaaaaaaaaaaaaaaaaaaaaank you. exactly what I was looking for. good video!
You're Welcome
Thank you for this!
Welcome sir 👍🏻
Thanks for the video. Do you know what firmware your units are on?
thanks!!!!!!!!!
I've been shooting some cooking videos and noticed that i got severe interference/signal loss from the induction cooktops the chef was using when on. Is there any way to shield this with the wireless go 2, also the 6db pad is off on mine i never had that issue. I had a video where it wasn't noticeable with a pan that covered the top of the cooktop but when using a smaller pan that didn't cover the whole burner serious interference.
Unfortunately i have the pad Turgenev off and still have really bad noise issues with them on both transmitters.
Finally, I don't need to explain to my client that I will noise reduction that feedback later on. But any idea what does the "PAD ON" does?
@@FilmPunk Thanks Mate! Well, I don't think we need that if we are using Split mode. I would just rather keep it off, than deal with that feedback noise and my client starts asking why it has that weird noise 😆
Lucky me, mine never did that
Why are there so many different solutions to this problem!? I love these mics but that hum, while not always there, is deadly. I hope this works. Thanks for the info!
@@FilmPunk I was really hoping you plan would work. It may in many cases. However, my pad (blue triangles) were not turned on. I've written to Rode. This problem is too big for them not to solve. I love the product but the randomness of this issue means I simply can't trust it. Thanks for the suggestion.
Spoke to soon 🤦. When I turned mine on, there was no triangle! Any other ideas?
👍🏾🙏🏾
Is there any reason why you use 2 recievers at the same time instead of 1, if you are recording alone?
Two transmitters did you mean? Usually I don't if alone. But for the sake of testing I'd put both on although it doesn't affect it either way.
@@FilmPunk ah I get it. Thank you for the quick reply!
getting this exact interference when I strapped the 2nd transmitter to a boom pole with an older Rode boom with 3.5mm connection. (1st transmitter was on lav and no interference) I didnt have pad enabled so Im currently trying to troubleshoot why im getting this exact interference... Too close to LED lights? Im not sure.
@@FilmPunk cell phone was in other room so not that but the coiled cable you got me thinking... rode mic is on top boom and cable is coiled down straight to the TX. Not sure how I would rig up the TX any other way but I'll run some whacky tests to see if that cable is acting as an antenna
@@FilmPunk this is a really old Rode videomic with 3.5 connection so I cant do much with the cable. I think Id be better off strapping an H1N to the pole and the video mic. LOL.
First of all I dont have the PAD ON. Second of all I still have interference with my GH5 camera
Hi, maybe you could help: I have this terrible clicking sound every time I cut my clip in FCP or create a transition. The audio was recorded with the Rode wireless go 2 mic. I tried to fix that, also with expanding teh audio and using cross fade transitions, as well as with playing around with different exporting formats. It's still there :(((( So disappointed
@@FilmPunk No worries, thank you for letting me know
@@FilmPunk Thanks for the tip! The audio is all ok in FCP, I can't hear any clicking. You can only hear it after you export. I discovered it per chance, before I uploaded a new YT video to my channel brrrr
...And then they say that these microphones have no defects....hahaha!🤦♂🤦♂
I thought this was fantastic! Sadly, it doesn't work. I still get the interference.
What camera are you using? Try turning off your camera's wifi and bluetooth, worked on my Canon
Same story, pads are off, camera Wi-Wi is off, longer 3,5 mm cord in use. Anyway one of the mics has that noise. Brought them to the service. Hope that will help 😐
@@Scorp_2 try a good quality cable I had a cable that was problematic and always hummed
You were here to help, not make views and cash out. Thx a lot.
I never made a penny on CZcams. Not monetised.
same thing i was saying, the video was so simple, helpful, its obvious u just wanted to help us...
@@FilmPunk