Model 3 & Model Y Carbon Fiber Spoiler: Remove and Install - TESBROS
Vložit
- čas přidán 18. 06. 2024
- Inspired by Tesla's Real Carbon Fiber OEM spoiler, this spoiler is an easy replacement or addition to your Model 3 or Y.
Shop Model 3: tesbros.com/products/carbon-f...
Shop Model Y: tesbros.com/products/carbon-f...
Get 10% off your first order at tesbros.com/ with code TESBROS10
Please subscribe for videos every week on how to customize, protect, and maintain your Tesla!
---
0:00 Spoiler issues
1:35 Remove spoiler
6:00 Clean area and prep for install
14:03 Install new spoiler
---
Used or mentioned in this video:
- Adhesive stripper such as Goo Gone (googone.com/goo-adhesive-remo...) or Easy Stripper
- Fishing line
- Prep Wash: tesbros.com/products/prep-wash
- Clay Bar: tesbros.com/products/clay-bar
- Car shampoo: tesbros.com/products/car-sham...
- Waterless Wash: tesbros.com/products/waterles...
- Wash Mitt: tesbros.com/products/wash-mitts
- Microfibers: tesbros.com/products/waterles...
- 70% Isopropyl Alcohol
- Drill
- 3M Eraser: www.amazon.com/Adhesive-Remov...
----
Build your Tesla with our style customizer: tesbros.com/collections/custo...
----
Related videos:
How to wash your Tesla with 2-bucket method: • How To Wash Your Tesla...
Ways to wash your Tesla: • 4 Easy Ways to Wash Yo...
How to clean microfiber towels: • How To Wash Microfiber...
Microfiber towels 101: • Microfiber Towel Guide...
---
Recommended Ceramic Coatings:
Gyeon MOHS: gyeon.co/product/mohs-evo/
G-Technique CSL: gtechniq.com/shop/auto/cerami...
---
Other after-market customizations:
- Rotating Screen Mount install for 3/Y: • Tesla Model 3/Y Rotati...
- Model Y power frunk install: • How to Install Hanssho...
- Model 3 power trunk install: • How to Install Hanssho...
- Center console swap from gen 1.0 to 2.0: • Tesla Center Console S...
- Debadge your Tesla: • Easy Tesla Emblem Remo...
- Install the PWS: • How To Install PWS To ...
- Replace Model 3 skid plates with aluminum ones: • How to Upgrade Your Te...
- Replace Model Y skid plates with aluminum ones: • Replace Model Y Skid P...
- Should you PPF? • Should You Put PPF on ...
- All about vinyl wraps: • 12 Questions About Vin...
---
Top Tesla Cleaning Products:
● Starter bundle: tesbros.com/products/clean-st...
● Waterless wash w/wax: tesbros.com/products/waterles...
● Interior Cleaner: tesbros.com/products/interior...
● Glass Cleaner: tesbros.com/collections/clean...
● Car Shampoo: tesbros.com/collections/clean...
Paint Protection Film Top Tesla Accessories:
● Model 3/Y Tinted PPF headlights: tesbros.com/collections/ppf/p...
● Model 3 PPF Rockers: tesbros.com/collections/model...
● Model 3 Door Kicker Panels: tesbros.com/collections/ppf/p...
Color Vinyl Top Tesla Accessories:
● Model 3 Chrome Delete kit: tesbros.com/collections/model...
● Model 3/Y Center Console Wrap: tesbros.com/collections/model...
● Model 3/Y Pillar Delete: tesbros.com/collections/model...
---
Our Shop - tesbros.com
Facebook - / teslabros
Twitter - / teslabros
Instagram - / teslabros
Email - support@tesbros.com
---
This video and design is protected by the U.S. and international copyright laws. Reproduction and distribution of this video for commercial purposes without written permission from TesBros LLC is prohibited. - Auta a dopravní prostředky
Thanks for the helpful video. Just put mine on today. Great products and fast shipping!
Just installed mine, looks great. I’m 71 love my new M3. Took me less than 5 minutes to install. Great product.
With that VHB that is used, your install process was fine, however, one small change. When you are pulling the red tape, only pull off like 1 foot at a time. As you pull off, hold down firmly the section for 30+ seconds to make sure that the initial adhesion takes. This is very important. I have install similar spoilers on several cars. That initial bite is important.
This worked thank you took a few hours but beats paying a few hundreds a for removal from a body shop etc
Super useful thank you .
Great products by the way
Thank you!
Love you guys work thank you!
Thanks for watching!
Thank you man!!!
The glue removers (eg. De-Solv-It, Goo Gone) are the the best way to remove the glue. Spray on and leave it sit for a few minutes. No need to rub or risk damaging the paint surface. Using the rotary brush is a no-no for sure
does it really work?
@@beach26 It works a dream for gluey type substances. In contrast, you can spend ages rubbing it with a cloth or sponge and it still won't fully come off.
@@vasil7410 after applying the glue remove, what tool did you use to remove the glue?
@@beach26 No tool required. The glue will disolve / soften and only a paper towel or rag is required to wipe it off. If the glue is very thick then a couple of applications may be required.
I put on an aftermarket spoiler from another company and after 6 months, the 3m tape on the ends has started to loosen. I believe the ends of the spoiler are too pointy to get the proper amount of surface area adhesion.
When applying the new spoiler, do not remove so much of the adhesive cover to start with. This makes it harder to adjust the placement of the spoiler if it sticks down too soon. Just peel off the the very ends of the adhesive cover first then position the spoiler before pulling the adhesive cover from the top first followed by the bottom one.
Also he removed both adhesive covers from the bottom. It would be easier to peel of the upper one from the top and lower one from the bottom
Wow that looks pretty easy and even I should be able to install it. Thanks
golden info!!!! i was going thru hell trying to install mines 😂 i knew i needed some technique
I have a 2019 P3D that is garage kept and 5 months out of warranty. Spoiler is delaminating and Tesla says too bad. What makes me think yours will not delaminate like the original one? Also I have ppf on whole car under the spoiler. How will this effect the removal?
Thanks for the vid! Would applying ceramic coating prevent the peeling, de-lamination?
It will help for sure.
Great Video Man! I am wondering, what's the Spoiler Finish you have on the Spoiler you used for installation in the Video. Please advise.
This one is matte!
Just got your spoiler for the YLR. Is the Gyeon ceramic coating for the white leather can be used to coat the spoiler or do I need to purchase another kind?
Awesome! Unfortunately for spoilers too want to use Mohs. We just launched that last week.
@tesbros Are those metal badge overlays? If so which ones? I got a m3p and the ones the previous owner put on look horrible and are peeling off
No, it's a vinyl wrap covering! It's part of our chrome delete kits: tesbros.com/products/chrome-delete
How can you change the visualization in a car and add a spoiler, if you have a long range vehicle?
Like in the app and touchscreen? I don't believe that's an option right now
Hello, do you have a link for the 3M black adhesive that you use for maintain 8 hour the spoiler please ? Or the name of the tape please thank you
the tape used on the inside of the spoiler? this would be a good one - www.amazon.com/Double-Waterproof-36-5FT-Length-Office/dp/B09CQ8Q875/ref=sr_1_21_sspa
Why aren’t you on Amazon?
How long you had the spoiler installed before remove?
This was an OEM spoiler on a 2019 Model 3, so about 3 years
Where did you get the black emblems from?
we have the black emblem kit for Model Y: tesbros.com/products/emblem-kit but not Model 3 yet. Definitely check out Abstract Ocean
Can we buy this spoiler in the UK?
Reach out to support@tesbros.com and we'll see if we can ship it to you and see what the best shipping rates are
Will the spoiler stay on in an automatic car wash?
Wait at least 24 hours after you remove the vinyl support, but shouldn't be a problem
How many inches from the sides should be the distance from the edges?
It's 5 inches for the Model 3 and about 6.5 for the Model Y. I would measure, mark with frog tape, set the spoiler on without peeling the backing off of the adhesive, then step back and see if it looks even before actually putting it on. If you purchase our spoiler, they do come with guides so you don't have to measure.
@@tesbros thank you I purchased the whole chrome delete kit from you guys pillars and doors very excited it should be delivered tomorrow
would you recommend this for a leasing vehicle? :D
It's better to not use a heat gun if the car hasn't been in several seasons of extreme temp. It will leave less slimy gum on the car. And you can use a shoe string.😀
Is this the matte or gloss?
This one is matte
Spoiler or no spoiler?
No spoiler looks 👌
Want
They don’t have the matt black one, showing out of stock 😢
Sorry about that, but we're working to get those back soon. Enter your email after the "notify when available" button to get the earliest updates on it: tesbros.com/products/carbon-fiber-rear-spoiler-for-model-y
dat intro tho
Wonder why they don't use bolts to hold on down such a nice car and they cheap out on that
No spoiler for me.
Makes me think twice of even adding the spoiler lol.
We're here if you have any questions.
Please fix your mic...
Remove it and do not put a new one.
that’s stupid
Agreed!
Right doesn’t look appealing
What is up with men and Carbon Fiber? It's so over rated and so 1990s. The whole point of updating your Tesla is not to look like a Ricer.