Fitting a stove and re-lining a chimney flue using steel flexible liner

This video shows the installation of a stove, after re-lining an existing chimney using Schiedel's TecnoFlex Flexible Liner. The combined screwfit pot hanger / terminal is shown, making it easier for installers to complete the entire installation.
www.schiedel.com/uk/products/...
TecnoFlex Plus is a twin skin flexible chimney liner designed for gas, oil and multi-fuel, where the maximum flue gas temperature does not exceed 600°C. Diameter range 80 - 300mm.
Features
Flexible Flue Twin Wall Liner
Corrugated outer skin for high crush resistance.
Extra smooth inner skin allows for easy drain down of condensates, less opportunity for soot to collect in the joint area and ease of sweeping.
Engineered joint design gives extra strength and flexibility.
Inner skin remains smooth and protective even after the rigours of installation.
Now with Lifetime*Guarantee.
Technical Specification
Both inner and outer layers made from corrosion-resistant 316L stainless steel.
904L stainless steel is also available as an option.
Applications
Tecnoflex Plus is designed for gas, oil and multifuel, where the maximum flue gas temperature does not exceed 600°C. Diameter range 80 - 300mm.
Music from the video is supplied by M33 project - freemusicarchive.org/music/m3... and / m33project

[@huchotaimen]

Very good 👌

[@BmcN72]

No vermiculite?

[@Swerve744]

Is this liner smooth on the inside

[@JohnJKelly-of4dc]

No, it's not, but it's fine.