Full Engine Replacement on the 2008 Chevrolet Tahoe LS - GMT900
Vložit
- čas přidán 25. 07. 2024
- Welcome back to another video with the Tahoe! We remove and install a new to us engine into out GMT900. This was no easy task, but we got it done.
I know this isn't a 100% Walk through, but I try my best to talk about the majority of it in one video.
Parts/Supplies:
1QT Motor Oil: amzn.to/2Ukr1V0
5QT Motor Oil: amzn.to/37M90SF
Oil Filter: amzn.to/3AJuyfe
Denso Spark Plugs: amzn.to/3spL019
Spark Plug Gap Tool: amzn.to/2VXMzY2
Exhaust Manifold Anti-Corrosion Bolts: amzn.to/3CQqCLu
Exhaust Manifold Gasket: amzn.to/3k1EIB0
Intake Manifold Gasket: amzn.to/2W2Be9m
Oil Pan Gasket: amzn.to/37LsW8f
Motor Mounts: amzn.to/3CNz6mN
Valve Cover Gasket: amzn.to/3jVJpws
Dirty Dingo/Engine Lift Plate: amzn.to/3sjClNT
Fel-Pro Pickup Tube O-Ring: amzn.to/3snKu40
Wsterpump: amzn.to/3sppJF4
Thermostat (drill extra hole for easier burping): amzn.to/3CNzt0F
Engine Stand Bolts: amzn.to/3CNzt0F
Engine stand and the Engine Hoist is from Harbor Freight, Highly recommend!
Check out my channel and subscribe!
/ automotivate
I have a website:
AutoMotoNation.com
Have questions or just want to chat?
Here is my IG:
Instagram: / automotivate
#AutoMotivate
0:00 Preparing the Hoe
5:45 I am a PRO
9:12 Hang it on the side
10:53 Engine who?
12:02 Pull That Sucker!
13:20 I like to break stuff
14:00 Letting the bad boy in
16:30 Does she crank?
18:00 But WAIT! Theres more! - Auta a dopravní prostředky
I've done this many times. Watching this video actually teared me up a little. GREAT JOB!
Props bro! Had to drop a like! Thank u so much for listing the parts that you picked up to complete this job
I’ll be watching this on repeat for the next month until I work up the confidence to replace the engine on my 05 Tahoe 😂
Going to be doing the same thing shortly. But I bought a running 05 Avalanche that actually came with a 90k mile 2nd engine with it for $1000.
Good video, I have to do mine here shortly along with the rear differential. Hope you made it through Hurricane Ian safely
THANKS!!! NICE CLEAN JOB!!!
Awesome job I just bought my Chevy Tahoe 2007 🎉
Bro this video helped me so much my dad left to go work and I need to get the tahoes motor ready to be removed thank you so much bro
Much love my friend, wish you luck on the swap
Very good job
Sincerely appreciate you doing this video and mentioning the engine price. i found a 2008 Yukon xl with 242k miles, but it was tight and well maintained. The engine stopped one day at a traffic light and the shop that got it wanted to charge me $10,000 for a used motor swap. I opted for a new timing chain and oil pump (made sure they did the o ring) and that cost me 3200. I got it towed home and after charging the battery, it still didn't engage the flywheel when I tried to start it. I'm getting killed on this $6000 purchase, but I think I'm going to find a different mechanic to see what he says the problem is. $1300 for a motor. sheesh. I was thinking two grand, but still 10k. Glad I didn't let him change that one. I may just work on it myself. Worst case I'd need heads.
I'm looking into to rebuilding my 2010 tahoes engine. I've had it since 2014 I bought it with right at 90,000 miles on it. As of today 6 November 2022 I have 226,000 miles on it still running great. I havnt had any major issues just regular maintenance. Imma go for 300,000+ miles then tear it down. Luckily I havnt had any issues with my transmission either. I did have my transfer case go bad. Bought a used one put it and everything is going good
helpful video.
it made me want to convert my hybrid to regular 6.0 in my silverado.
(hybrid delete)
opinion😊
I am currently contemplating to rebuild or replace the engine in my 2013 Suburban. I can not believe I found metal glitter in my oil at 140,000. Who do recommend getting a motor from?
Bro you're a beast
Appreciate it man 🙏
Good video bro and how to get the engine stand bolts for the engine
Yeaahhh. 😂. New subscriber here 😂😂😂
Thank you bro! Having to do this soon. My piston rings on one of the cylinders broke. Low compression. 😢
Are you sure they broke? What motor is it?
Very informative video thanks thinking about pulling my engine.. seems difficult but not impossible...
Take your time, watch CZcams videos and be patient. The hardest part is removing the flywheel from the converter so be sure you have quality tools for that job.
@@AutoMotivatewhat tools do you need, is there a how to video of that portion?
Damn bro that was a good video. I have the same Tahoe like yours Ltz and it's been in my driveway for a year now. My mechanic took out the engine and came with a same engine but the sensors are located on the top instead on the sides and he said his gonna make it work. Is that gonna be an issue with the performance of the Tahoe?
8:26 what's the first thing u said to remove the top bolts? Extension with swifle and what ?
What city do you live in? I want to live there. Also thanks for the help, I’m pulling my 08 Yukon 6.2
What motor did you install into the Tahoe and did it have the dod delete?
Does anybody know how many bolt the bellhouse has
Nice Video..👍
Can u please tell how mch time did you take orignally to get this complete work done ,from removing ,and putting new engine in the car if you would work continuously.....please...
Thank you! It was a bit hard.
Having a friend to help with the process, I think you can get it done in 1 full day with zero hiccups, proper tools, and with this video guiding you.
However, in my case, not including working on the other engine, I think it took probably 20-25 hours.
The total amount of footage I had was around 15 hours.
The putting back to get her took a while, but it was much quicker, especially since I didn’t record. Torquing down the converter with the flex plate took a while and proved to be the most difficult in my case.
Where'd you get your motor from? i gotta do a swap on an '11 suburban when i get back from rotation
💯💯
Nice video,I’m thinking something high performance.Any recommendations?
I have the same year Tahoe
Could remove the engine and rebuild it. Thats my current plan, however, I am not 100% how much power the tranny can take
@@AutoMotivate thanks for the info,good question and I’ll have that answer soon.The performance shop is sizing all that up for me
I have an 07 same exact truck..has afm and has stuck lifter..140.000 miles..I can change lifters to regular ones and lifter trays..new head gaskets,new head bolts...but you have to change the cam..so then oil pump,timing chain, gaskets..... UGG....junkyard has 2005 lm7 5.3 for 450$...160.000 on it....he's a friend....then u can get low lift cam and not have to change springs...cam swap is easy on ls....don't have to take heads off....but still timing and oil pump,,o ring....a must like he says....or just have it swapped...1200-1400...either way it's 2 grand or more....it's a pain to do like this but these guys did great job...I'm debating ????? Or can go buy a 6.0 w 360 hp on craigslist or junkyard and just put that in...3000 g buy the time it's done....it all sucks....but gotta be done....now it's just a budget thing because I have no fkn money because my everything cost so much.....think I'm going to just do myself....can take out,clean it up take down to heads and block,..o ring,.new gaskets ,paint....then its a 1000.…
Wow, this was more difficult then I expected.
I tried my best to show everything, but that just didn’t happen. However, this should still help guide you through the engine swap.
I’ll add the links soon 🙏
Hey, did you remove the mount from the top?
Hey mate, does it require new engine mounts or thats normal.just my thoughts😀👌👍✌
It doesn’t, but I figured I’d want to be as new as possible so I replaced as many parts that could go bad as I could within my time frame
Bought a 1500 HD 6.0 crew cab with 200k miles for 1k can’t wait to do a swap on it
Heck yeah man. Wish you luck
Just the Vid I needed! Shop wants $7,650 to do a Engine Swap on my 07 Yukon Denali XL with the 6.2LV8
This video made it seem easy if you take your time.
My Lifter broke in the Motor Reason for Motor swap time!
That’s awesome man.
The issue with this engine was also a lifter. If I knew that then I would have just removed the heads and replaced the lifter and cam. Would have been much cheaper and less labor intensive. The LS engine is one of the easier engines to take apart.
I have a video of me tearing into the engine if you want to check it out.
Either way, I wish you luck man
@@AutoMotivate I just hope its the same process considering the Denali got the 6.2 and its AWD
@@cammims7645 only difference you’ll have is disconnecting the AWD trans/axles. I doubt it’s any more complicated. Just a bit more work.
@@AutoMotivate Hope a Motor swap is needed cause Ive been also dealing with Stalling issues when coming to a stop. Got so bad, I had to Press Brake and Gas at same time to keep from stalling. Thanks for the Video and Fuck H.O.A And their stupid rules lol
Price quoted sounds average
Can i put 2016 engine & transmission in my 08 Yukon 5.3 with 8 speed
I don’t know for sure, but I am assuming you would have to swap the wiring harness and the ECU
How many bell housing bolts were there cause I’m having trouble getting the motor out I’ve followed every other step
I have forgotten. I know I was having trouble and there was a bolt directly on top of the bell housing, which you can get to by going between the motor and the firewall.
Beyond that, it was semi difficult pulling the bell housing off the motor. Had to use a prybar, I believe
@@AutoMotivate thank you I’ll double check
Where are you located?
Curious why putting the bolts back in the converter was tough ?
Tight squeeze to get the bolts, they are very shallow and you have to constantly turn the crank to get to the next bolt.
Being so shallow, it’s easy to slip the socket and ruin the bolt; so be careful
How much does this service run a estimate. I was just told I need a new engine my 2008 Chevy Tahoe has over 200,000 miles
I was quoted $5800, so I bought all the tools and an overpriced used engine and cut 2k from the price.
I just re did my 07 Tahoe and paid 3700… new engine 5 yr warranty
@@beachboi_lb1612 did you replace the engine yourself?
@@AutoMotivate I have a friend doing it for 600$ before he offered I had got a quote from a mechanic shop asking for 1200$
@@AutoMotivate honestly it dosent seem to hard… I just don’t have the time 😔 to do it my self
I was told .. to never remove bolts with a torque wrench.. it will mess with the calibration.. idk .. so I don't
17:00 Hahahaha !
18:24
can i bring my truck to you...change engine
lmao, honestly, I would not want to do the job again unless I needed to. I have the know how, but the labor. It is worth saving the money, though
HOA is trying to tow a parked car in your driveway that doesn't look like it doesn't run. Smh.
yeah that is why I would never live in an HOA community. All the stupid rules and regulations, and the stuff they tell you that you can or cannot do to your own house just blows my mind.
Crapshoot engine , should of bought a reman
Don't understand why you left out pulling it out and putting it in. Totally frustrating and waste of time to watch this when you're trying to learn how to do it yourself.
I literally showed me removing it and placing it back in. Every tiny detail can not always be recorded in a drive way and a time crunch. Ive already had loads of folks saying it helped them out. Be confident and you can do it
That's because his intent isn't to create a how-to video; his intent is to act like he swapped an engine and look cool, you know, the look at me social media generation lol what a joke.
You left out taking out and putting in the engine; useless video regarding a how-to replace an engine; literally a narcissistic waste of time.
Is this labeled as a how to video?
@@AutoMotivate "Full Engine Replacement...." title literally implies taking out and putting in the engine; maybe title such nonsense "Hey look at me" next time.
@@foleym9145 all of it was recorded. Chill fella
You probably didn't depressurize the fuel lines either lmao