The correct way to load and unload a Winchester 94.
Vložit
- čas přidán 15. 05. 2022
- Here’s how to load a Winchester 94 without the hassle of the cartridges wanting to slide back out. This also makes a tactical reload possible. Something you can’t do with a box magazine.
I absolutely love this rifle. I recently saved one from a turn in after the owner passed. Dumb luck really. I worked with the owner's daughter and the mother found it buried after turning in all of the other weapons he owned. My friend asked if I wanted it and gave it to me not knowing anything about it. I ran the serial number on Winchester's site and it said was manufactured in 1895. I wouldn't let her just give it to me so I had it appraised and gave her a fair price for it. It is in amazing condition.
That’s a great story. Nice find for you and nice you took care of the daughter too.
I have a Marlin 30-30 36-A-DL from Marlin firearm Co can you tell me more about it
If she was just turning all the other guns in, then I would’ve taken it no question. She doesn’t deserve a fair price for doing that. I would be rolling in my grave if my SO gave my stuff away...
Those turn ins are a fricken government scam to destroy priceless family heirlooms that have been in family's for generation after generation it should be criminal for government to do that I got my first Henry 22 and a rough rider shooter that went with it when I was 8 I affectionately called them angry bees and they were passed down from generation to generation at one time my great great great grandfather's I had 22 called angry bees then at 13 just in time to start deer hunting they upgraded me to Henry 45 and uberti shooter to go with it which I affectionately named killer bees angry bees and killer bees and my stoger side by side shotgun is murder hornets lol
You Sir are an honest Man. Bravo, Chivalry isn't dead.
One of the greatest guns ever made, mine was made in 1950 it belonged to 2 grandfathers (both sides of the family)and my dad, now it’s mine so it means alot to me, it’s in immaculate condition
Never let it go!
After sighting in at 60 feet, I could easily cover 5 shots with a nickel czcams.com/users/postUgkxQt2uORDRfFOVSrO4idv4B90ThT6EOnEL ! Truly a pleasure to shoot! Scope was easy to adjust for eye relief. Only problem the varmints must have seen it delivered lol!Update: So impressed with shot groups at 30 yards I purchased a Hammers 3×9 with adjustable Objective scope! Now a true nail driver!
Short, flat, light, and super handy!
My ‘94 was made in 1923 in 38-55 cal. Has a Lyman tang sight and in excellent condition.
Just got my 94 at a swap meet for $300. It was made in 1909 still shoots beautifully.
That’s a steal! I’ve paid a lot more for lesser guns!
YOU, MY FRIEND, SHOULD CHECK IT OUT, $850.00 + IS A STANDARD PRICE AND COULD EASILY BE HIGHER...
I picked up a 1949-dated 1894 for $400 from a buddy back in December. Needs some work.
The 150 grain bullets usually end up inside and next to the hide. The 170 grain bullets go thru the deer. Love the rifle handles well when stalking thru the woods with one hande. Now unload the rifle by holding it in my left hand and my hunting hat under the gate. Point it in a safe direction and cycle the lever and the cartridges will drop into the hat. This keeps the cartridges clean and off the dirt.
Nice technique!
Can you leave it loaded without ruining the magazine spring?
Been spring loading mine for decades. If you practice, it's much easier to load 3/4 shell and slide next one in same way. Can load it much faster.
Got a '94 "Trapper" model. Takes Blacktail on the West side of the Cascades, and Whitetail on the East side. At close range, 100 yds, or closer, it'll drop Mule deer, and even Elk. Also Black bear, with heavier grain 30-30 rounds. Great all around hunting and defense carbine.
Couldn’t agree with you more. I had a friend who used the 30-30 on lots a deer, four black bears, and even an elk. He hunted with just the one rifle and used both 150 and 170 grain bullets depending on what he was after.
The 30-30 is very under rated, within 100yds it can take everything in north America except grizzly or brown bear which I'm sure has been done many times.
I got one about 3 years back from a client I was doing a job for. Fell out of his closet and asked if he'd be interested in selling it. Sure enough he was willing to part with it and I got it for $150. Mine was made in 60s. Favorite rifle to shoot though that's for sure!
Absolutely Love the Winchester 94! I think the 30-30 is very underestimated too. Congratulations on a great buy.
I find holding the rifle with my left hand (I'm right-handed) with my pinky wrapped around holding the neck of the cartridge just pushed 3/4 of the way into the port, chasing each succeeding cartridge with the next until the last one, which can just be pushed beyond the gate nose with my right hand. Simple as pie. Works on any gate-loaded lever action.
Well, you're half-right. Most, if not all, older Model 94s will load as you describe. Many newer Model 94s will not load a cartridge into the magazine once the previous cartridge is fully loaded into the gun. I have one of each. In fact, Winchester states in the owner's manual to leave a portion of the previous shell sticking out of of the magazine to load the next. I agree, this is super annoying when you see other 94s that don't have the issue. There are numerous fixes on the internet that suggest polishing the back side of the loading gate, and/or shortening the magazine spring to let off tension so the shells can be loaded easier. I guess my point is, there are some 94s that no matter how hard you try you cannot perform a tactical reload. It's not necessarily the intelligence of the owner.
I guess I've just been lucky. Both of my 94s and my dad's are all capable of loading in this fashion. Mine are tof he newer cross-bolt safety variety and my dad's is an older post -64 model.
Well, that answers my question. Mine won't open the gate if the previous round is fully inserted. Thanks for that.
@@treeratbusterI've handled 94s that were over 80 years old, and my current one is early 1980s. Never have I had a problem with topping up a magazine tube. LOL, the 'quote' you cite from the company itself says, in effect, that modern 94s are for all intents and purposes, SINGLE SHOT RIFLES. They can't be that dumb.
With my old 94 I have to press on the loading gate as I lower the lever slightly.
The loading gate pops in and I can top off the magazine no problems.
Try that and see if it works for you.
I believe it is due to significant wear on the loading gate.
Hope this helps you out
Never had a 94. Are yall saying that if you load a round into the magazine tube you can't load more after that??? While watching the video I was thinking how is this different from any other side gate loading lever gun. I must be misunderstanding something
Nice video. Have one manufactured in 1937. 85 years old and still in original condition. Shows a little wear, not much. Passed down through the family. Again, great video.
Thank you. I would love to have an old Winchester like your. Treasure it!
@Flying K Sports Thank you, I do treasure it. It is an American classic. This 30 30 has taken down its fair share of deer.
I added the Williams aperture sights to one of my 94s also for the same reason - aging eyes. It already had the two drilled/tapped holes on the left side of the receiver for it.
My was also drilled and tapped for either a scope mount or a receiver site. That Williams site bolted right in with no problems.
Very nice video. My family ‘94 was built by Winchester in 1898 and was restored over the years, primarily in Japan which has the best wood and metallurgy experts. Tigereye Maple stocks, complemented by serious silver inlay engraving. In 32-40, I cast my own 165 grain bullets for it.
Sounds like a great family heirloom.
I just got a Pre 64 Winchester 94--- so stoked. My first lever action. 1955 made.
One of my dream guns is a pre-64 Model 94. Sounds like you have a good one.
I prefer my Marlin. It side ejects instead of top eject. Optics options. And it loads easily, like you demonstrate with this Winchester.
As the proud owner of a gorgeous, unrestored 1956 Winchester 94, I greatly appreciate the tutorial. Informative and beneficial. Because of its beautiful condition - original blueing, very slight gate wear, in-tact sight cowl, and perfect stock - I'm always reluctant to fire this piece of Americana. I should get over that, huh?
I appreciate your desire to keep the gun in like- new condition, but the rifle was made to be fired. Shoot it. Clean it. Maintenance will keep it like new.
Seeing as it is one of 7 and and a half million Model 94s in the world, yes you should get over that. it is just another gun.
The best way to unload with absolute safety involved is the method I use. Lever out your chambered round, then bring your next round up and start the slide to the chamber but do not chamber it, bring your lever back all the way cover the opening with your hand and jiggle out the round. This way also saves on the rim of the cartrige as it never engages totally with the cartridge.
Works with marlins too. You never have to put a live round into battery
I brought mine new in 1978 in 44/40, a fairly uncommon calibre in that model.
It was stolen in 1989 and because I still had the receipt I got it back in 2002 (long story) I've got 10 other Winchester lever actions in all models but the little 94 is the first one I grab from the safe when I need a rifle in a hurry on the farm.
The 94 still feels great in the hand and almost always gets the job done. Light, flat, compact and still useful.
Just bought an original 1899 .38-55 model 94, such a pretty gun
Congratulations on a great find. I just love the look and feel of those old Winchesters.
My Grandfather owned the same Model 1894 saddle ring carbine in .30-30 from 1936 until 1993. I have a photo with him and that gun from 1936 with a large deer, and he hunted with it until he was 79. He killed just about everything with it. Deer, bear, grouse, rabbits, everything. He told me that there was no gun as versatile as the Model 94 and he was right. I've owned probably a dozen or more over the years in a variety of calibers, these days I have two, a Model 1894 rifle in .38-55 and a SRC from 1921 in .30-30. There are few guns that can keep up with the Model 1894 when it comes to reliability, and in .30-30, probably one of the best all around calibers you can get.
The 30-30 might be the ultimate all-around rifle cartridge. I’ve known men who hunted with nothing else. One old-timer I knew killed several bears and more deer than could be counted with a 30-30. The 30-30 and the model 94 is a near perfect combination.
The ‘94 is a fantastic rifle for thin skinned game. I have a reviver mount Fast Fire 3moa on mine that is great for old eyes. Have used a Remington M7 for years, by the older I get the more fun I have getting close. A good red dot on a 94 is now the hot ticket
For heavy cover.
Sounds like you have a nice set up.
I like the tube fed levers of Henry but their both great I like em no matter.
I can tell you why the guy was loading it the way he was (which is the same way I do it). You can push it in far enough for the loading gate to barely close behind the base of the cartridge, but it is not far enough in to catch on the mechanism that controls when a round backs out of the magazine tube into the action. When that happens and the loading gate closes, the cartridge slips back into the action a little bit and then blocks the loading gate from opening. At that point, you can't add more rounds.
Mine was made in 76 with a lot of stamped parts that sometimes have sharp edges. You don't want to be shoving any of your appendages inside the action through the loading gate to get the rounds far enough forward that you can let the loading gate close between inserting rounds.
I appreciate these simple videos because there's a lot of young guys that don't know these things
Thanks. I’ll keep making them.
I would love to get a older one. The Winchester is amazing to me and the only lever I really like because of the light weight and handiness when carrying in the woods or to the range. Nothing else compairs
I’m always on the lookout for a pre-64. Haven’t found a nice one yet.
A couple of different with mine. I have an 1892 in .357. Depressing the gate is like pushing back a rat trap spring, so the half out works well with that size cartridge.
Mine is the same way, does yours scratch the brass deeply? And cant super deep scratched cartridges do some damage inside the chamber? I started using nickel plated ammo becuase it doesnt scratch as easily but its also more expensive. I see these people with butter smooth loading gates and im jealous lol
@@joeytyo I have not noticed that.
I did call Chiappa about the issue and they had no solution.
I have always loaded mine the way you show and I have had mine since 1985. One thing though doesn't the manufacturer recommend loading the magazine with no more than six rounds. I have always went with 5 rounds in the mag as to lesson the compression on the magazine spring and hopefully make it last longer. Just my own precaution. Great vid. Thank you.
Thanks Ian. When I'm loading mine for a hunt I usually only load 4 or 5 rounds hoping this helps with ease of feeding. Sometimes, I'll load 7 at the range just for fun, but Winchester did recommend 6 as the max loading.
@@FlyingKSports I recall getting 7 rounds in one, but really had to force it, helped it the bullets had backed into the case some
Enjoyed your video, very well done
Thank you very much.
I have a pre 64 , just like me! Love carrying it, sweet rifle !
Someday, I’ll have a pre-64 too.
Very informative video. I just bought a 1957 Model 94. It's in as new condition. Going hog hunting this week with it.
Congratulations, that’s one of my dream guns you got there! Someday I’ll have a pre-64 Winchester.
Love my ‘ol ‘94 in 32 Special!
Great rifle / caliber combination. Do you buy .32 Special of reload it?
I just found your video tonight because my wife and I went to this police/military store that also sold guns. Found a 1971 Winchester Model 94 on a rack with shotguns today on 12/21/22. The tag said it had been there since November 3rd. Someone glued a diamondback rattlesnake hide on the forearm. Now I'm learning all about it.
I need to start going to more police/military stores. That 94 is a great find.
I have the same Williams site on my 94. Fun fact. If you unscrew and remove the aperture piece, you now have a,”Ghost Ring,” rear site which is as fast an iron site as has ever been invented. It’s just as accurate, IMO, as the eye naturally centers the front site.
Great to know, thanks.
I love my 94’s, and 92’s, and my one and only 95.
Someday I’ll have a 95. Until then it remains a dream gun.
the reason that the guy on the video was pushing the rounds in with the next round was to prevent finger pinching and probably need to perfect it..some loading gates are more forgiving
I feel bad that the guy bought the cheapie
A stone or some 400 grit sand paper will take the edges off the gate. Works on shotgun lifters too. Some disassembly required.
Thank you for the video 👍
Thank you and you're very welcome.
Beautiful furniture on that rifle. I have a '58 and a '62.
You’re holding two great ones. I’m still looking for a pre-64.
This is my all time favorite rifle! I will forever say it’s the most versatile one in my collection
I’m with you. I don’t think I could ever sell or trade my 94.
First deer rifle I owned , have always had one. Need to push second cartridge in following the first and so on , otherwise gate is a pain to get
Next cartridge in if loading gate closes!
yes exactly.
both of my daughters were made in New Haven Connecticut ! nice, thx!
Great place to be from.
Originally made in New Haven,Connecticut and they employed a lot of craftsman , both man and women.
Unfortunately, not much being made there these days.
Finally after 30 years I know how to load without the spring pressure
YEARS AGO SOME ONE MADE AND ADVETISED A TOOL TO UNLOAD W/OUT CYCLIING EACH ROUND THROUGH.
Thanks for teaching me
Thanks for watching.
I’ve got a 94 AE version too but mine doesn’t have that silly safety. The 30-30 is no Nancy round, definitely will get the job done up to 200 yards.
I think the 30-30 is way too under rated. Great round.
My 94 is probably my fav thing ever.
If I had just one gun, this might be it!
you can unload em without chambering each round. Open lever, turn upside down and wiggle it out. Close lever and next will arrive out of magazine. Open lever, do not close, use fingers to wiggle out next round. Might take an extra minute, but no rounds going into chamber.
That method works too. Thanks for sharing.
For those who wear glasses to see distance, you can aviod putting an add-on peep sight on the rifle by cutting a square of black electrical tape, punching a clean, sharp 1/16" hole in the middle of the square, and simply sticking onto you right lens. As you lean into the stock, you willneed to place it in the upper, left corner of the lens because that's where youer eye will be aiming from. Fiddle with the placement a bit, til the hold is natural.
This method places the light refractory at your prescription focal point for best effect, rather than having to adjust your hold to fit a static rear peep placement on the tang or reciever. The hole will always be placed correctly, no matter what rifle you shoot. Works for pistols, too, but you place the tape more to the middle of the lens.
Your prescription will focus the distant target and the peep will focus the sights, with less focal confusion in between. Less than a penny.
The M-94 in .30WCF remains a very viable general hunting rifle and cartridge, with about the same ballistic s as the 7.62x39. I love mine, born in 1939. The 94 is far stronger than it needs to be for the .30WCF, but it does not compare to the Savage 99, though, which is my all time favorite lever gun in .300 Savage.
Thanks for the tip!
I hope to get an older 94 like yours and i agree with you on the Savage 99. I'd like one in .308.
@@FlyingKSports The .308 is a good round, but I prefer the lesser recoil of the .300 Savage, which is near identical to the .308 in performance. Also, the rotary magazine on the older ones cannot be damaged by accidental mis-handling. If you're luicky, you can find a model 99 in .30-30. Reload with spitzer bullets and the old .30-30 is remarkably accurate and shoots flat and much faster than the flat or round nose bullets out of a Marlin or Winchester.👍
@@OutnBacker Never knew the 99 came in 30-30. Now I have another gun to put on the wish list.
They sure did, I had one and seen a few others @@FlyingKSports
Love your Love of the 94
Still just a great little all-around carbine.
@@FlyingKSports I picked up an early 1950' model 64 that is a pistol gripped handy little version of the 94 and has the shorter Mag tube in 32Wsp. Took her out for Buck this year!
@@scottwilson1258 Nice! I like that model 64. Usually see them
With rifle length barrels.
@@FlyingKSports Correct 24"
I don't know why, but most of the time when I see "gun channels" with lever actions they don't even know how to properly cycle a lever action. Or when they fire a round they drop the rifle from their shoulder and cycle a round.the rifle should stay on your shoulder and the lever should be run with authority in a quick, smooth arc. Love my levers, have a couple of several manufacturer's with the savage 99 and the Browning blur at the top of the list, 99 is a 250 savage and blur is a .358win. Thanks for a very good tutorial on loading and unloading a 94.
I always reload like Arnold in terminator 2 one handed.
You had my subscription at “deer sized targets” lol
Thanks.
My experience is that it sucks loading if one compares to other rifles. I have had a -94 and I now have a Mossberg 30-30 and that one has an ejector on the side. Furthermore it can only do well with winchesters silvertip. Other tumble like hell. Anyway it’s my number one weapon. One can learn to shoot with whatever if one only practice
My dad gave me one in 1973. I’ve down a number of deer with it. I hunted in hilly heavy brush and this was the perfect rifle. Winchester later started putting those silly safty features which ruined the gun.
The safety was the ugliest feature ever added to a classic rifle.
"A solution looking for a problem." ☆
I was always taught to hold it upside down when unloading live amo
The ones that are made in Japan are built by firearm experts and they are incredible rifles.
Miroku rifle are very well made. I just wish Winchester was still made in the USA.
I have a Question I have a Winchester when pull the Lever up to put the bullets into the gun is it safe to do if you know how to do it because my dad does it that way or do you have to pull the Lever up and then pull it down to put the bullets into the gun I know some people do it differently I go deer hunting and I shoot targets my Winchester can shoot 13 rounds
Did you have to put on a taller front sight when you put on the peep site? I put an XS ghost ring sight on my trapper and it shoots too high to sight in now. So I'm going to get a differnt front sight or rear sight that works with what I have.
With the Williams site I was able to keep the original front site.
I have the Ranger, not sure the difference but in any case its friggin awesome.
The Ranger was the bare bones model. No front sight hood, lower quality wood. I love mine!
Great video, thanks for the tips.
What's that ammo holder on the stock ? It looks nice.
Thank you very much. The ammo holder is just a Walmart purchase, but I had to get the sewing machine out and modify it.
Nice vid I load my 1951 .32 Special that way . Easy peasy. BTW I use 170 and 200 grain loads.
Thanks. I’ve handled lots of .32 Winchesters, but have never shot one.
Wow very informative. Have one from about 1954. Grandpa’s 😢
Sounds like you have a great gun there. A pre-64 Winchester that’s been in your family for generations. That’s a family heirloom!
My father just gave me a 1902 94 32 special made in New Haven CT. Cannot find ammo in Canada for this baby.
Great rifle. Congratulations. You’ll have a hard time finding ammo, but it’s out there. Keep looking.
Feel fortunate to have one bought it at k mart twenty plus years ago
You won’t believe this, but I bought that one at K-Mart too!
That's great
Got my grandpa's 94. He installed the same peep sight, I imagine for the same reason you did! I have a hard time hitting the target consistently with the rifle and I wonder if it has something to do with the wider rear aperture? Wonder if Williams make a smaller aperture to switch out?
Yes they do make a smaller aperture to swap out the big one.
Wow...genius!
I just bought a winchester 94 that was left in a barn in Florida for a couple years. Made in 1958 it's been soaking in PB blaster and is starting to come loose. All the furniture needs replaced but beyond that and ordering new screws it's looking like it can be saved
Convert that rust. Don't wire wheel it. Boil those steel parts.
@@FlyingKSports got any advice on removing a stripped screw? the lever stop screw was stripped when I bought it and I've been debating whether I should fool with it or have a gunsmith deal with that problem
@@Sidewiner94 if it’s the head you may be able to use an EZ out to remove it. I if it’s the threads you may have to re tap the threads. Neither is very difficult. Might require you to buy some specialized tools.
@@FlyingKSports yep just the head. I'll have to give it a shot
did it the wrong way with a marlin as a kid even though my dad showed me that way. one time i was doin it the wrong way n as i was pushing the first cartridge in with the second, i slipped n the first cartridge sprung back behind the loading gate. daddy wasnt happy when he got home. took him forever to get that cartridge out.
That’s a good lesson to learn as a kid. Pretty serious back then, Now you and your dad can laugh about it.
Are you able to make a video on how to properly clean and lubricate this rifle?
I will.
Can you tell me if the bolt is supposed to rub the top of the trigger when chambering on a 94?
The bolt will ride over the hammer, but not the trigger.
The loading ports called the Kings port
Great video! Where did you get your gun cuff from?
That’s actually a Walmart item. I just sewed the additional strap on the back to keep the cuff from sliding up the stock.
Best rifle ever. John brownings genius on display...
There are so many examples of John Browning's genius, the 94 is certainly one of them.
I've hear the ammo sleeve can slide up and get in the way of the lever. I'm going to try tying of the end somehow so it doesn't catch on a branch, like right when Mr. bear is attacking and ruin my bruin.
Check out this older video where I modified the ammo sleeve to keep it in place.
czcams.com/video/JwujzrwtV0U/video.htmlsi=xzDiZx2mpdiW2dDV
Good video
Thank you.
Can you suggest a Better iron site, then the ones that came with my 30-30.
I really like the Williams receiver site. Lyman makes one also. The receiver site lengthens the distance between front and rear site so that increases accuracy.
If the rounds pop back out can you unload through the loading port?
NO. If cycling the action makes you nervous, use your thumb to grasp the lever. Form the rest of your fingers into a fist. Now the rest of your digits cannot accidentally hit the trigger. Unless you're a hopeless nincompoop. In which case, we advise you to stay away from firearms. Totally.
I bought a 94 from a friend who was going through a divorce. Later he bought it back. Later on I bought it back and now it is a keeper.
Hang on to that 94! Don’t let it go a second time. You might not get it back again.
My rossi r 92 lever action 45 colt is a nightmare to load my Henry 45 with the side load gate is way easier to load the other benefit is on the Henrys you can just pull the tube out and dump them out they hold 10+1 I love lever guns !! 😊 If your in a bind you can crank some rounds out now someday I would love to get a authentic Winchester but for now my rossi and Henry a pair of uberti 45 shooters and a stoger coach side by side is what you will find hanging off my truck rack or my saddle scabbard And they have saved my life a time or two from rattlers and other threats when I was bringing in stock mending fence or plowing
Nothing fits in a scabbard better than a lever gun. Ultra durable too.
@@FlyingKSports lol amen !!
I've left you a comments in the past about sites. Can you also tell me where I can get a stock cover like yours
Hate to say it, but I got that shell carrier at Walmart. I sewed on that extra piece of strap to keep it from sliding up.
when unloaded, is good to keep safety plug on, right?
That should be fine.
The ammo holder on the butt looks very stable. What brand, where did you purchase?
I bought at Walmart. I sewed on an additional strap on the end of the sleeve to keep it from sliding up the stock.
I inherited my father's model 94 ranger
Someday my sun will inherit mine too. I’m not selling it.
Winchester and Henry rifles are excellent !
Love my Winchester rifles and can’t beat the smoothness of a Henry.
What is that brand of ammo holder/sleeve?
It’s a cheap one I got from Walmart. I think Allen. I added a strap to the end to keep it from sliding up the stock.
The loading technique works on older 94’s, but on every 1970’s vintage one I have owned, the first round loaded blocks the loading gate from opening again. If you mess up, sometimes an energetic shake will move the round enough to open the gate again, but usually you have to cycle the round through and start over.
I never had a problem doing it either way, mine are all older
I bought one of these way back in the 1900s. Paid $150 at a gun show. My former supervisor told me that they had skyrocketed in price and were selling around $600 or $700. He offered to give me my money back for it.
That was awful nice of him! 😂
@@FlyingKSports
Needless to say I still have my 30-30
curious to know if anyone knows if the Winchester Model 94 comes with a saddle ring ??
Some did. Called SRC for Saddle Ring Carbine.
I unload mine from the gate. That way i only have to lever it one time
Optometrist here--Unbelievable that shooter of Winchester wore no safety glasses. 😐
Tge essential rifle for anybody anywhere
You’ve probably found this out by now but that elastic cartridge holder on the stock will wear off the finish. I found this out the hard way
Once I added that end strap, the cuff no longer slides around and rubs the finish.
I see it's a post-83. You really want a pre-83, if not a pre-64. :)
I own a .356 lever gun in a model 94 and it's enough to stop a freight train. I do beg to disagree however, the 1873 is the rifle that won the west. I have one clone made by Uberti (Taylor's and Co.) and also an 1866 Yellow Boy by Winchester, both in .44-40. All are a real hoot to shoot.
Winchester lever action was definitely the rifle that won the West. The 94 was just too late to the party.
The butt stock on mine seems loose and wiggles. Any ideas on how to fix it? Surprisingly, it doesn't seem to have affected the accuracy as long as I hold it so the stock is stable to one side or the other.
First look to the tang screw. If thats tight you may need to have it bedded. Accra-Glass might be the best solution.
@@FlyingKSports Thanks, I'll do that.
I have a newer 94 I bought in 2004 and removed the rear tang and installed a decent optic on it. Its surgical out to 200 yards...ive not tried further. I hunt in Alberta using Hornaday Leverevolution rounds and every deer Ive killed with the firearm is DOA. Since I started with the hornaday ammo ive fired 4 rounds and killed 1 fence post and 3 deer all over 100 yards. I recommend it however Ive not successfuly been able to load the new ammo as youve shown in your video. If I let the door close thats it.. I m going to try my old round nose tube magazine rounds the way you've shown and see if that works. Maybe the points on the hornaday rounds are the issue? I never load more than 5 rounds anyway. If you need 10 there's a problem. Also fyi the 94 with a decent 10 power scope looks beautiful, handles well and is quick on target plus beats carrying a cannon in the Rocky Mountains. Greg. Alberta.
Greg, sounds like you've had pretty good success with that 94! I just put a 4X scope on my 30-30. Haven't even shot it yet.
HORNADY
My Wonderful Father gifted me this rifle at 15 and I still have it @ 34yr.
I never learned how to clean it after shooting. I also dont know where
To find cleaning tools?
Another question? Where can I find the extra accessories for the rifle?
I did a video on cleaning lever guns from the muzzle end. Any general gun cleaning kit should provide you with everything you need to clean and maintain that great old rifle.
I'll look at the video you made on cleaning the rifle.👍 much appreciated.
Yes,Sir... I'll get the tools and keep the rifle clean from here on out.
Embarrassing. We'll again, Thank you and I appreciate the content. T.C
It is a bear to completely disassemble a model 94 and not necessary with normal use. Years back my brother in law was given his Grandfather's Win 94. Outside of the bore, the rifle had never been cleaned. He wanted me to clean it completely, so I took it apart - it really did not need to be cleaned in that fashion. They are a kin to a bolt action rifle where the action does not see the crude from shooting the rifle; that all stays in the bore. I don't care for bore snakes, but they are perfect for that type of application if you are concerned about cleaning from the bore with a cleaning rod.
As per cleaning a firearm from the bore, how are you to clean a revolver from the breach? You can't. How about a pump shotgun; why bother? Growing up, all the firearms in the house were cleaned through the bore - and they survived me and my twin brother doing so. My father had a .22 semi auto rifle that had never been apart to clean the action - I bet I was 26 before I took it apart to do a full cleaning. When I got out of the Corps in 1986 I became the neighbor hood gunsmith - most of the kids I grew up with never cleaned their firearms. I never knew I had so many friends....
@Chuck Howard
Thank you for posting information.🙏👍
The 94 chambered in 30-30 is such an iconic weapon is seems almost disrespectful to buy a new generation nanny government approved for your saaaafety new one.
I’d like a pre-64.
@@FlyingKSports I have a little model 94 story for you. In 1973 I was the Deputy Sheriff bailiff in a Los Angeles criminal court room. One afternoon we were slow, and were just sitting around talking. The conversation drifted to hunting, fishing and such. The old court clerk said in the early 60s he was the court clerk in a murder trial where the weapon was a 1950 model 94. At the end of that trial he asked the judge to give it to him rather than destroy it. In the court record the judge gave it to him, on condition he could never sell it for profit. At his older age he no longer had any use for it. Guess who owns it now.
Does anyone know what the real value of a 94 Theodore Roosvelt Commemorative would be?
Cabelas has one for sale right now. Listed for $1599.99.
“Deer size targets”