Followed these instructions exactly and they worked. Never taken a phone apart like this before - huge gratitude for your clear instructions. Really, really helpful.
I bought my stepdaughter a used iPhone for Christmas and was totally unaware of this issue. I felt bad because I bought her a broken phone and also because I was out $300. No phone repair place would touch it. I tried this and it's fixed!!!! More amazing is by following your directions, I was able to put it back together perfectly! Thank you so much!!!
Best solution ever. I tried almost every method to fix the touch disease, but they weren’t as a permanent solution as this one that ISmart demonstrated right here. I tried cleaning the inside of the phone with a toothbrush. That didn’t work. I tried putting a SIM card inside of my phone to connect the screen to the phone that didn’t work. I tried restarting and resetting my phone. That didn’t work as well. ISmart earned that Nickname. I wouldn’t have been able to fix my phone without him. I didn’t have red adhesive tape, but I used double sided and black electrical tape to place them on the two components to connect the touch screen to my phone, and it worked very well for me. So far the touch screen disease didn’t come back for a week. I thank you ISmart.
Thank you so much for your video. My husband shared this video to me. And today I followed your steps and fixed his iPhone 6+ successfully. Our cost is zero! You are really talent. Thanks again!
2018-12-05 I have just done this and , so far, no touch disease. Thanks very much! I'll report back on how it goes over time. 2018-12-15 It’s been 10 days and iPhone is still working great. 2019-01-24 iPhone 6Plus still hasn’t missed a beat. 2019-09-24 my iPhone is still working with no problems. I didn’t apply any heat to the Touch chip but that is recommended in the latest version of this fix. Have a look at the new version released 2 days ago also.
I just had to write how happy i'm that i tried using this video. I must admit that I didn't think it would work. Not to mention those screws are tiny. But to make a long story short I followed the video and i'm happy to report it "Worked" !!!!!. Just take your time and pause the video in case you need more help. Yes I lost a few screws but my iPhone 6 Plus is working again. Thank you and God bless.
I haven't even tried this yet, just now seeing, and I already love this video. Why? Because you REASSEMBLED it on the video too!! Another video I found only fixed it and then ended the video. Hope this works for me! This phone helps so much with my business.
What I did to fix mine (so far it’s worked 2 days) is take as many screws out of the motherboard as you can and pry on the side gently while tucking in tightly folded paper shims. You can take out the motherboard and put electrical tape on the back as a shim but my screwdriver hates half of the screws in that phone. This video is an absolute godsend so far, thank you.
Thank you very very much!! I use my iPhone 6 Plus for work and you my man have made my day. Thank you again for your expertise. Had this phone for 4 years I replaced the screen as it was fried but now it’s responding everytime. I had to smack it to work there for I knew it was a hardware problem. Absolute legend. Thank you thank you.
This was an extremely helpful tutorial on how to fix the "ghost touch" problem. However, I want to give a warning to anyone with a 6S Plus. There are a couple different points in the video to be aware of. 1) Don't forget to disconnect the power-button connector before lifting the motherboard. It loops under the motherboard and around to the top. This connector is different on the 6 Plus, so it is not in the video. Just be careful. 2) The two points to apply pressure are not in the same positions either, so you need to be a little more creative with your method. I just finished doing this, though, and it looks like everything is in working order again. I'm leaving the phone on to see if any problems come up, but it's been roughly an hour already and it's still perfectly responsive. Thank you so much!
@@ameliaseinitausala1810 What do you mean? I did it almost exactly how he did in the video, but just pointed out the differences in my comment regarding the 6S Plus.
IT WORKS !!!! I hesitated at first, then I watched the video twice. Did exactly as directed, now I am super happy with my iphone. a little tip> it is tricky when you twist the mother board out, so pay attention to how he does it.
OMG AMIGO YOU SAVED my life!!! im completely broke without a job I can't believe how easy it is to fix my phone, as my dad says if you teach a man how to fish...... thanks amigo people like you make youtube an even bigger asset!!!!!!
Awesome fix, worked for me on an iPhone 6 where you have to remove a couple more screws to remove motherboard compared to the 6 Plus. Thanks for the video :)
I did this tape trick and it worked for about 9 or 10 months from November 2018 to yesterday September 21st, 2019. Part of it is probably because the tapes adhesive (electrical tape) was good but over time just stopped working and started moving around and I stopped the phone many times these past two months so I think it wasn’t as tight I redid the process about 4 months ago btw and it worked but now it just doesn’t anymore so I guess that’s it for my 6 plus time to downgrade to my 5s 💀, did the tape trick again today December 20th and I fixed it but I pryed the battery out so now I need a new one and a new WiFi antenna because I always loose a screw and break something when I take iPhones apart.
Excellent...it worked for my iPhone 6 plus almost everything was successful except the Wi Fi antenna I accidental broke the tiny cable, so I have to order a new one online for $2.99 following your video instructions step by step, Thank you so much...!
Joe Cifuentes hi joe, I did the same thing when I took this apart, so I disconnected the broken antenna cable with the intention of getting a replacement... did you put your phone back together with the broken antenna and did it work? Mine isn’t turning on without it, so I wonder if that’s it or if I messed something else up.
Yes it works. If still not working try adding another layer of adhesive. Depending on bend in phone it may need more. Not too much however, can cause pressure on screen/digitizer that is visible when touching screen.
you are a legend! i already like and subscribe your youtube channel...i know when i go to repair its gonna cost me about $200 to buy new motherboard (may be) BUT you really awesome...its work 200% thank you so much...
Excellent presentation, helped me out a lot. The disassembly and reassembly instruction were awesome. So far it's functioning as advertised. Thank you so very much for sharing your in depth knowledge and skills!
yo dude.i jst want to say, this trick is perfect. i don't have to reball the ic to solve the freaking screen. very much thanks for sharing your knowledge.
A VERY competent repair person! Like I was in my younger years! Very sharp eyesight, and steady hands! I wonder is this is more with the iPhone6" as it had a softer aluminum? They changed to a stronger aluminum in the 6S and Plus I read?
Thanks brother! I looked at 10 videos before I saw this and it was very simple and it worked. Took about 15 min total. Thank You I'm very upset with apple because when I brought it in they said nothing about this disease and I was forced into buying a new phone, Just after paying off my 6plus for a grand I get hit for another grand and 30 more months with ATT What a Scam!!
Great video. I learnt so much from this. I have replaced my own battery and screen on my ip6 and this has given me the confidence to help my family & friends with further repairs 🤪👍
I have to stop back and thank you. The idea of doing this was more daunting than actually having to go through with the fix. You were very slow and methodical. I was able to do this in no time. What I would recommend is, include a link for a screw chart. :) Thank you!
Great video, I’m watching it on an Iphone 6 plus with the very same problem, I will try to fix it following your tutorial since I can’t afford a new phone right now.
Hey thanks for the video because it helped me tremendously. Your steps were very precise and clear. The camera was still and I could see what you were doing very clearly. I did use a piece of electrical tape that I saw from another video. Thanks again!!!! I finally have my phone back.
I've just repaired my iPhone 6 Plus's touch disease with this instructions! But, instead of using folded scotch tape, I used some hard plastic that I cut out from a SIM card adapter. Now my phone finally works perfectly! Highly recommended instructions for the iPhone 6+ touch issue! Thank you iSmart for this video!
Mate... you are an absolute legend..... I took me phone to almost every single phone repairs and they told me that it was better for me to buy a new one cos the repair could cost me like a new phone..... so I just followed your instructions and bloody hell mate... it fully works now.... you r absolute awesome bro... tnx you.
Jordan Cook: Sorry for replying wrong. My screen had issues and while I was watching this video my screen acted crazy again and replied to you without me touching the screen.
THANK YOU!! I EVEN JUST LIFTED THE SCREEN AND PLACED A PIECE OF CARD ON THE CHIP COVER WITHOUT REMOVING IT. WILL SEE HOW LONG THAT LASTS AND THEN MAYBE PLACE UNDERNEATH. WISH I HADN'T GONE OUT AND BOUGHT ANOTHER PHONE NOW LOL. THANKS AGAIN.
your phone was just a little different than mine and i had to take it apart again because it was only partially fixed but after the 2nd time my phone works great now! thank you very much! great video :-)
I want to thank you for sharing this video. I do cell phone repair part time and I always like to learn new stuff. If you could? Can you please add the temperature you used. My attempt was successful but it was a shot in the dark with the temp. Thanks again.
hi Felipe, i set the heat at the highest level and i heat up the component for 2 to 3 seconds maximum, I MAY HEAT IT TWICE BUT BE EXTREMELY CAREFUL BECAUSE THE SOLDER MAY MELT UNDERNEATH THE COMPONENT AND THEN THE MOTHERBOARD WILL NEVER TURN ON. DO IT ON YOUR OWN RISK ;)
Hey man! Ur videos have been really a great help to the problems in my iphone 6s now. I just have a question about my connectivity in my device.. when i try to connect to a bluetooth speak i cant get even far for more than 2 to 3 meters from the speaker and when im connected to a wifi i got lowest signal bar to my wifi even if im just beside the router. We have 2 iphones in our house and this is the only that i’ve notice getting this kind of issue.
big clutch. I tried the solution but didnt have enough layers so i took it apart and put it back together with more layers. It did make the problem less worse but it still does the thing every so often.
Brilliant! How did you figure this out? And you should be a surgeon. I've never seen hands so steady. Sometimes it take me a minute or more to position a single screen. Great video!
Mine has no bent at all but had Ghost touching issue. I saw video where putting a tape onto the LCD connectors would solve the problem. I tried it and my phone is still working fine.
A good one it seems to me this solution is working 100% cuz I did exactly unless I didn't heat it and it's working, when I switch on the phone the touch works correctly but after it sleeps if I wake it up with home button the touch work no more, after following this method everything work, I just wanna see what's up the next 24hrs.
I would like to try this one. Looks easy. I already tried to fix my iPhone6plus once, I replaced the LCD. After a while some part of the screen does not work. Like I can swipe it to the left and to the right but when I try to switch it off the screen does not work. I can't also press the 4/R button. So I ordered another LCD replacement. If the LCD replacement still has the same issue, I would definitely love to try this one. I'll save this video for my future reference :) Also please give me advise if it's the LCD that really has the problem or just the motherboard itself? Cause I feel like I waste money to buy a new LCD replacement. Thank you.
Followed these instructions exactly and they worked. Never taken a phone apart like this before - huge gratitude for your clear instructions. Really, really helpful.
I bought my stepdaughter a used iPhone for Christmas and was totally unaware of this issue. I felt bad because I bought her a broken phone and also because I was out $300. No phone repair place would touch it. I tried this and it's fixed!!!! More amazing is by following your directions, I was able to put it back together perfectly! Thank you so much!!!
Best solution ever. I tried almost every method to fix the touch disease, but they weren’t as a permanent solution as this one that ISmart demonstrated right here. I tried cleaning the inside of the phone with a toothbrush. That didn’t work. I tried putting a SIM card inside of my phone to connect the screen to the phone that didn’t work. I tried restarting and resetting my phone. That didn’t work as well. ISmart earned that Nickname. I wouldn’t have been able to fix my phone without him. I didn’t have red adhesive tape, but I used double sided and black electrical tape to place them on the two components to connect the touch screen to my phone, and it worked very well for me. So far the touch screen disease didn’t come back for a week. I thank you ISmart.
Thank you so much for your video. My husband shared this video to me. And today I followed your steps and fixed his iPhone 6+ successfully. Our cost is zero! You are really talent. Thanks again!
2018-12-05 I have just done this and , so far, no touch disease. Thanks very much! I'll report back on how it goes over time.
2018-12-15 It’s been 10 days and iPhone is still working great.
2019-01-24 iPhone 6Plus still hasn’t missed a beat.
2019-09-24 my iPhone is still working with no problems. I didn’t apply any heat to the Touch chip but that is recommended in the latest version of this fix. Have a look at the new version released 2 days ago also.
Thanks for ur update👍👍
Eric Davis Is it still working?
Still working?
update?
Eric Davis mike stopped
Couldn't do almost nothing with my iPhone, tried this and now it works perfectly! Thank you very much, very good explanation and very nice video!
I followed along with my 6. Fixed it flawlessly. Still working fine weeks later. Thanks man!
M L mine stopped yesterday about 9 months later
Does it work using normal tape?
I just had to write how happy i'm that i tried using this video. I must admit that I didn't think it would work. Not to mention
those screws are tiny. But to make a long story short I followed the video and i'm happy to report it "Worked" !!!!!. Just take your time and pause the video in case you need more help. Yes I lost a few screws but my iPhone 6 Plus is working again. Thank you and God bless.
I haven't even tried this yet, just now seeing, and I already love this video. Why? Because you REASSEMBLED it on the video too!! Another video I found only fixed it and then ended the video. Hope this works for me! This phone helps so much with my business.
This worked for me bro!!! My phone was down for two years; Thanks for your video and for your time.
What I did to fix mine (so far it’s worked 2 days) is take as many screws out of the motherboard as you can and pry on the side gently while tucking in tightly folded paper shims. You can take out the motherboard and put electrical tape on the back as a shim but my screwdriver hates half of the screws in that phone.
This video is an absolute godsend so far, thank you.
Thank you very very much!! I use my iPhone 6 Plus for work and you my man have made my day. Thank you again for your expertise. Had this phone for 4 years I replaced the screen as it was fried but now it’s responding everytime. I had to smack it to work there for I knew it was a hardware problem. Absolute legend. Thank you thank you.
This was an extremely helpful tutorial on how to fix the "ghost touch" problem.
However, I want to give a warning to anyone with a 6S Plus. There are a couple different points in the video to be aware of.
1) Don't forget to disconnect the power-button connector before lifting the motherboard. It loops under the motherboard and around to the top. This connector is different on the 6 Plus, so it is not in the video. Just be careful.
2) The two points to apply pressure are not in the same positions either, so you need to be a little more creative with your method.
I just finished doing this, though, and it looks like everything is in working order again. I'm leaving the phone on to see if any problems come up, but it's been roughly an hour already and it's still perfectly responsive.
Thank you so much!
Jason Capp but how did you do it??
@@ameliaseinitausala1810 What do you mean? I did it almost exactly how he did in the video, but just pointed out the differences in my comment regarding the 6S Plus.
Which components are do you have to stick up, I see 3 squares
@@jcsjapan but......this is a vid for the 6 Plus, not the 6s Plus.
@@saud..- Did you bother to read my comment? haha
IT WORKS !!!! I hesitated at first, then I watched the video twice. Did exactly as directed, now I am super happy with my iphone. a little tip> it is tricky when you twist the mother board out, so pay attention to how he does it.
OMG AMIGO YOU SAVED my life!!!
im completely broke without a job I can't believe how easy it is to fix my phone, as my dad says if you teach a man how to fish...... thanks amigo people like you make youtube an even bigger asset!!!!!!
Very detailed tutorial.my phone is back to business again.many thanks to you.
Awesome fix, worked for me on an iPhone 6 where you have to remove a couple more screws to remove motherboard compared to the 6 Plus. Thanks for the video :)
It was just easy peasy... Done in 30 min and it soled my problem. THANKS!!!!!
I did this tape trick and it worked for about 9 or 10 months from November 2018 to yesterday September 21st, 2019. Part of it is probably because the tapes adhesive (electrical tape) was good but over time just stopped working and started moving around and I stopped the phone many times these past two months so I think it wasn’t as tight I redid the process about 4 months ago btw and it worked but now it just doesn’t anymore so I guess that’s it for my 6 plus time to downgrade to my 5s 💀, did the tape trick again today December 20th and I fixed it but I pryed the battery out so now I need a new one and a new WiFi antenna because I always loose a screw and break something when I take iPhones apart.
Excellent...it worked for my iPhone 6 plus almost everything was successful except the Wi Fi antenna I accidental broke the tiny cable, so I have to order a new one online for $2.99 following your video instructions step by step, Thank you so much...!
Joe Cifuentes hi joe, I did the same thing when I took this apart, so I disconnected the broken antenna cable with the intention of getting a replacement... did you put your phone back together with the broken antenna and did it work? Mine isn’t turning on without it, so I wonder if that’s it or if I messed something else up.
I have done it. It works for my iPhone 6. Really appreciate it.
"easy solution" Yep start vy taking your phone apart including the motherboard
Me: ????????????
Fran H it’s not even hard lmao you literally just unscrew then repeat
@@TT-zp8hg the point is that its incredibly inconvenient
That’s me. And I’m usually good with fixing things but I can’t trust myself with this one 😂😂
Fran H Breh it’s not hard I’ve done it many times and even the first time was easy just have the tool kit nessecary
I'm looking like 🙄
he sounds like gru from minions lol
Yeah
now i cant unhear it
Gru's tutorial for fixing iPhones.
Yes it works. If still not working try adding another layer of adhesive. Depending on bend in phone it may need more. Not too much however, can cause pressure on screen/digitizer that is visible when touching screen.
you are a legend! i already like and subscribe your youtube channel...i know when i go to repair its gonna cost me about $200 to buy new motherboard (may be) BUT you really awesome...its work 200% thank you so much...
Fantastic. It worked for me. Thanks Buddy for posting this very practical, sure to fix problem video!
You have earned my subscription brother 🇰🇪🇰🇪🚀🚀
im suprised this actually solved my screens issues
Thanks!
Excellent presentation, helped me out a lot. The disassembly and reassembly instruction were awesome. So far it's functioning as advertised. Thank you so very much for sharing your in depth knowledge and skills!
Instablaster.
Of course a thump and index finger can make it back chipped card softwared at all......
Gd uper curent passage intaction
Thoroughly 8 wirely connected to gd brother to 3 parts like a layered cake to u:-)
Ritely maked 3 layers beautiful congrats😊
thank you thanks to you my son's phone works I use a hair dryer ,your are a champion !!
Just fixed my iPhone 6 . Thanks so much
Thanks for this! It works! Hope the fix will last.🙏🏼
And it works only for 1hr😭
yo dude.i jst want to say, this trick is perfect. i don't have to reball the ic to solve the freaking screen.
very much thanks for sharing your knowledge.
It worked for me. Thank you so much for this tutorial.
omg thank u so much i did it and my iphone 6plus finally works thanks to you 🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏
Thanks ismart!!! This video is so helpful... now i can use my iphone 6 plus
A VERY competent repair person! Like I was in my younger years! Very sharp eyesight, and steady hands! I wonder is this is more with the iPhone6" as it had a softer aluminum? They changed to a stronger aluminum in the 6S and Plus I read?
Bill Miller
Thanks for your comment.
Usually this issue happens mostly with the 6 plus , I never seen it on other iPhones.
Thanks for the video, i have just finished and the phone working just fine for now
My phone had the same problem and got fixed the same way. Works well
Thank you bro this help me for learning and get a job , im from iran
many many thanks...my iPhone 6 plus works now...a good medicine for a touch disease :) :)
Thanks brother! I looked at 10 videos before I saw this and it was very simple and it worked. Took about 15 min total. Thank You
I'm very upset with apple because when I brought it in they said nothing about this disease and I was forced into buying a new phone, Just after paying off my 6plus for a grand I get hit for another grand and 30 more months with ATT What a Scam!!
Great video. I learnt so much from this. I have replaced my own battery and screen on my ip6 and this has given me the confidence to help my family & friends with further repairs 🤪👍
Superb solution. It's working fine. Thankyou verymuch. 😀😀😀😀
I have to stop back and thank you. The idea of doing this was more daunting than actually having to go through with the fix. You were very slow and methodical. I was able to do this in no time. What I would recommend is, include a link for a screw chart. :) Thank you!
You're a saint! Can't thank you enough!!!!!!
Always disconnect battery first - or you may have backlight filter problem
Great video, I’m watching it on an Iphone 6 plus with the very same problem, I will try to fix it following your tutorial since I can’t afford a new phone right now.
this method did work, but intermittently for me. i guess i will have to simply replace the motherboard. great job for putting up this video.
Thanks.. my ip6+ sits for 2 yesrs but now its working again. Thank you
Hey thanks for the video because it helped me tremendously. Your steps were very precise and clear. The camera was still and I could see what you were doing very clearly. I did use a piece of electrical tape that I saw from another video. Thanks again!!!! I finally have my phone back.
Glenn Carguillo , glad to hear that. Thanks for the comment. Let me know if you have any questions.
Does your phone still work? after one month?
Nico Cole
If the phone bent a little bit again the problem will come back and you have to do the same thing to fix it. This solution is temporarily.
Many thanks for resolving my problem
Omg thank you for uploading this video , stayed up last night following everything you did and now my phone is working again 🤗🤗🤗✌🏾
good job girl, i'm happy for you.
Description of the problem and explanation of the solution at 8:30
Oh god, you save my iphone 6 . Thanks you.👍😁
Wowww... it’s working perfect for me.. I tried this on my iPhone 6 Plus... amazing 😉 ideaaa.. 👍🏻👏🏻👏🏻👏🏻👏🏻
I've just repaired my iPhone 6 Plus's touch disease with this instructions! But, instead of using folded scotch tape, I used some hard plastic that I cut out from a SIM card adapter. Now my phone finally works perfectly! Highly recommended instructions for the iPhone 6+ touch issue! Thank you iSmart for this video!
Does it still work
@@alaylahoward9773 Yes, my iPhone works perfectly since I followed this solution.
AMAZING :) now my phone works perfectly!
Mate... you are an absolute legend..... I took me phone to almost every single phone repairs and they told me that it was better for me to buy a new one cos the repair could cost me like a new phone..... so I just followed your instructions and bloody hell mate... it fully works now.... you r absolute awesome bro... tnx you.
I'm happy to hear that mate
make sure the flat head doesnt slip *flathead slips*
My phone went from unusable to working like new. Thanks for the video.
This worked for me! thank you SO much. We'll see how it does long--term you saved me lots of money thanks.
Jordan Cook ?
Jordan Cook: Sorry for replying wrong. My screen had issues and while I was watching this video my screen acted crazy again and replied to you without me touching the screen.
so, how is your iphone today?
Update us on how the phone is today
How many times do you told the tape
I just opened my 6s and saw different shiny squares which ones should I stick with tape ??? Pls help
I tried this today ! and my phone want to say " thank you " for your help ! You are awsome man !
Thanks for the solution,now my phone work good,thanks again
Works like a charm iSmart. Thanks
THANK YOU!! I EVEN JUST LIFTED THE SCREEN AND PLACED A PIECE OF CARD ON THE CHIP COVER WITHOUT REMOVING IT. WILL SEE HOW LONG THAT LASTS AND THEN MAYBE PLACE UNDERNEATH. WISH I HADN'T GONE OUT AND BOUGHT ANOTHER PHONE NOW LOL. THANKS AGAIN.
Kevin Scarlett how long did that work for?
this is the most informative among all videos
Thanks
Excellently done.. Very clear instructions plus great video.. Thank You
Does your iphone still work?
Mines cannot work help please
i can confirm this, worked on my 6S plus.
That is exactly what my phone problem. Thank you.
Das erinnert mich daran, wo ich meine Playstation mal auseinander gebaut habe ^^
Well explained!
I did all what you do and it works perfect! Thank you!!!
your phone was just a little different than mine and i had to take it apart again because it was only partially fixed but after the 2nd time my phone works great now!
thank you very much!
great video :-)
I want to thank you for sharing this video. I do cell phone repair part time and I always like to learn new stuff. If you could? Can you please add the temperature you used. My attempt was successful but it was a shot in the dark with the temp. Thanks again.
hi Felipe, i set the heat at the highest level and i heat up the component for 2 to 3 seconds maximum, I MAY HEAT IT TWICE BUT BE EXTREMELY CAREFUL BECAUSE THE SOLDER MAY MELT UNDERNEATH THE COMPONENT AND THEN THE MOTHERBOARD WILL NEVER TURN ON. DO IT ON YOUR OWN RISK ;)
Hey man! Ur videos have been really a great help to the problems in my iphone 6s now. I just have a question about my connectivity in my device.. when i try to connect to a bluetooth speak i cant get even far for more than 2 to 3 meters from the speaker and when im connected to a wifi i got lowest signal bar to my wifi even if im just beside the router. We have 2 iphones in our house and this is the only that i’ve notice getting this kind of issue.
I think you didn't connect the wifi/bluetooth cable correctly
Excellent video!! do you have a link to the tape you used?
big clutch. I tried the solution but didnt have enough layers so i took it apart and put it back together with more layers. It did make the problem less worse but it still does the thing every so often.
Best indien english speeker xD ✌️
Lol I'm not Indian though ;)
I just fixed My Iphone 6+ using this method. Thank you @iSmart!!! More power!
Brilliant! How did you figure this out? And you should be a surgeon. I've never seen hands so steady. Sometimes it take me a minute or more to position a single screen. Great video!
Great Company Great Services
sencilla e increible solucion, a mi me funciono solo 3 pedazos de cinta y quedo a la primera.
2 de ellos arriba de esos circuitos del primer video lo que no entiendo donde pones el tercero? me podrías decir, saludos
I just finished doing this and so far so good it's definitely working much better I will update this comment if anything changes
iRavee Bwoi please update us cause my phone is having the same problem
Update?
iRavee Bwoi
yes you can use duct tape. I'm using 3m double sticky adhesive. 3 layer of tape.
2 ml high.
iRavee Bwoi update?
Do you have an update? I'm interested to hear about the long term success of this fix.
@ismart. I have seen this video which is very informative. I have same issue with my phone. I have question. Can I replace the LCD to solve this
Can you use like any tape or does it have to be a specific tape
Mine has no bent at all but had Ghost touching issue. I saw video where putting a tape onto the LCD connectors would solve the problem. I tried it and my phone is still working fine.
Thank you sir, this is the best video and explanation. Very clear instructions!
Gentel open and repack of two parts scren and charge clip screws......
Excelent video brother! I have a question. What tape do you use to stick the chips?
greetings from Mexico
Hello?
thanks a lot brotherly I really appreciate. its simple and work perfectly well, thumbs up bro.
Hi! Which kind of tape did you put inside? is it a special one?
CAN I USED ANY TAPE?
OR WHAT KIND OF TAPE DID U USED?
A good one it seems to me this solution is working 100% cuz I did exactly unless I didn't heat it and it's working, when I switch on the phone the touch works correctly but after it sleeps if I wake it up with home button the touch work no more, after following this method everything work, I just wanna see what's up the next 24hrs.
It worked to fix my daughters phone. Thanks so much!
Can i send u my phone and u can fix it i dropped it and i started having this problem
Wow so cool
My mobile 6s plus I faced touch problem right side touch sometime not working?
What is this solution?
I would like to try this one. Looks easy. I already tried to fix my iPhone6plus once, I replaced the LCD. After a while some part of the screen does not work. Like I can swipe it to the left and to the right but when I try to switch it off the screen does not work. I can't also press the 4/R button. So I ordered another LCD replacement. If the LCD replacement still has the same issue, I would definitely love to try this one. I'll save this video for my future reference :) Also please give me advise if it's the LCD that really has the problem or just the motherboard itself? Cause I feel like I waste money to buy a new LCD replacement. Thank you.
Perfect, worked! Thanks.
This worked for my iPhone 6