Restoring a 100 YR Old Swedish Jack!
Vložit
- čas přidán 19. 04. 2024
- Hello, I hope you liked the video, a Nike 16HB Harvey Frost jacket
This rather attractive jacket is actually made by Nike in Sweden. Imported to England for supply via Harvey Frost.
It's described as a bumper jack, but apparently the lift arm fits perfectly into the square chassis tube.
Offered with Gordon-Cable cars from 1964 to 1966 (100 cars).
This antique jack was in the corner of the warehouse and I saw it was a good project for restoration, but I emphasize very much that it was very, very rusty. I separated the jack parts with difficulty and with the help of brake oil, the jack piston was stuck I took a lot of trouble to remove it from its place. After disassembling the jack parts, I washed them all well with detergent to remove any grease and then sandblasted them except for the jack cylinders.
Sandblasting did not work and I put them again in a pan of rust removal solution for 24 hours and completely removed them with a wire brush. I will remove the part that has a chain and goes up and down along with all its accessories and start the restoration from this part. I do it, it got stuck and it was very difficult to start, all the screws were released with difficulty and with the help of brake oil. And I sprayed the red paint that is used for most of the jacks on them. I polished some of the parts and then I painted a layer of chrome on them with electrolytic nickel chrome.
I opened and rebuilt the rest of the parts of my road that were very rusty with difficulty
welcome. My name is Behnam and this is the How to restoration channel. My grandfather was a carpenter and my father continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools It should not be thrown away, it should be restored and used again. I believe that everything that is older and has been made before has a solid structure and is very durable and made with principles. All tools today are mass produced with very low quality. My way of thinking is that I was born in 1990 and I will leave the world once, so I do what makes me feel good.I haven't tested many tools yet and I want to reach them one day and my art. I will create with those tools. I earn from CZcams and if you want to support me in this way, I would appreciate it if you subscribe to my channel and follow the videos.
Thank you for your support, dear ones.Support 👇
/ @howtorestoration
#restoration
#antique #how #diy #tool #rusty #rust #asmr #jack #rebuilding - Zábava
If you enjoyed the video, please like and subscribe to the channel for more videos. Thank you for your constant support❤️❤️
😊😊😊😊😊😊😊😊😊😊😊😊
It said on the sticker Gordon Cable, the car was Gordon Keeble. It was a hand built upmarket car with an American V8, a grand tourer.
Fun restoration! A lot of different skills went into doing it and making it so nice in form and fiction.
I don’t understand why people feel the need to “correct” someone on how they do this sort of work. This is how you wanted to do it and how far you wanted to restore/improve.
Fantastic job!! Really enjoyed it.
Yes, that's right, thank you for your understanding
I have never seen a jack like that before. Splendid restoration job you did on that Swedish jack. It looks much better and it works like a charm too. Excellent work.
Your support means the world❤️🙏
Some don’t like it, but I like that you use filler to smooth rough surfaces. The Jack itself lets you know it’s old so making it look as new as possible is great. Very nice work. Especially with making a new hook. Well done 👍
Your support means the world❤️🙏
I enjoyed the brazing. Many restoration amateur hacks will weld cast iron, which creates majorly _reduced_ strength in the heat-affected weld zone. Nicely done here.
👌👏
Fantastic restoration
Many thanks!
Such a great restoration 👍👍
Thanks bro
Excelente trabajo, mucha dedicación y precisión. Felicitaciones!
Your support means the world❤️🙏
Beautiful restoration. I love it. ~Kevin
Thank you very much!❤️
*Outstanding Video:* Good camera work and editing. The close-ups really stand out nicely.
Thank you very much!
Перфектна работа. Браво.
That’s so kind of you🙏🙏
Сам люблю что нибудь реставрировать, интиресный процесс увлекает и люблю наблюдать . Всем удачи и интересных роликов.
Your support means the world❤️🙏
...Du machts echt perfekte sache in sachen restauration mit viel Liebe und besser wie Neu....👍👍👍
Das ist so nett von dir🙏🙏
I have one that is fully funktionel in my shop,nice to see that im not alone,😀
😁👬
What is it made for ???
chassis
Some extremely good REPAIRS/restoration👏. I believe some have a problem with the word "Restoration" because of the difference in meaning between the words.👍
Great point!
Trabajo bien hecho. !!!!!!!!!
❤️🙏
Great job!!!!! The film is very well EDITED, but some general plans are missing. And a show of how this jack works would be useful. Greating from Poland.
That’s so kind of you🙏🙏
I very much enjoyed your video and I gave it a Thumbs Up
🙏❤️
Sehr gute Arbeit. Ich finde löten oder verzinnen besser als Spachtelmasse. Aber egal, toll gemacht. ❤🤠🤘
Danke lieber Freund
Cavolo è meglio del originale! Bravo.
I appreciate it 😁
,Да в народе говорят: у вас руки на месте, Молодец!
Your support means the world❤️🙏
That is a masterpiece, great restoration, viewer from trinidad
Thanks so much
6:17 Zatuhlý řetěz nejlépe vyčistíš ponořením do nafty, nebo do petroleje. Pěkná renovace zvedáku. Pavel 🇨🇿
🙏👍
Watching the fresh weld shrink at 9:06 is really interesting.
I hadn't noticed myself, now I see😁
Super top
✌
Yay, green oil
Nice work 👍👌
I appreciate it❤️🙏
Мастер ты красавчик 👍
Если вы имеете в виду мой тип и одежду, я должен сказать нет, это противоположно тому, что вы думаете, и моя рабочая одежда маслянистая.😁😁🤷🏻♂️
@@HowToRestoration я имел ввиду то, что вы делаете своими руками.
Newer heard them be called Knekt before. A Stövel Knekt is that thing you use to pull your bots of with. Where I live we would call that thing a Domkraft.
Your support means the world❤️🙏
Good restoration. By the way, made in Sweden. Closer to me😊. Regards Stig Österberg from Dalsbruk in Finland.
yeah 👍
Your support means the world❤️🙏
Perfect❤
🙏❤️
So nice 👍
I appreciate it❤️🙏
so nice video
That’s so kind of you🙏🙏
Well done 👍
Thank you! Cheers!
Great restoration
I appreciate it❤️🙏
Hortlot bei Guss, Stahlblech kann man auch mit Acetylen/Sauerstoff schweißen, braucht eine sehr kleine Spitze.
That’s so kind of you🙏🙏
"If it's Swedish, it's still broken." - Finland 😂
It's not, this jack is great
@@HowToRestoration it's a Finnish joke, dont worry about it
@joshthecomputertech I did not know that 😄
Molto bello! 👍 cosa usi per annerire il gancio?
Super blue
top;...!
❤️🙏
Ese gato lo traían los for y chevrolet del 70
What year exactly do you know about this jack?
Необычный инструмент удача что он попал именно к вам 🎉
Удача, должно быть, приняла меня за кого-то другого!
Bravissimo ma ti faccio una domanda. Dove hai trovato le parti in gomma? Credo sia stata la cosa più difficile.
I left the rubber parts and packaging to my friend and he did it for me.
Sarebbe interessante capire come ha fatto a realizzarle, soprattutto quella del pistone che ha un profilo molto particolare. Grazie per la gentile risposta
COMME TROP SOUVENT UNE FOIS LA RESTORATION FINIE?ON NE PAS A QUOI CELA SERT.....
Estas son herramientas que cuando el que las usa lo despiden, se va de la empresa o se jubila las arinconan por que nadie sabe manejarlas bien. Y es una lastima que no sigan en servicio.
Se coloca en la colección. 🙏🙌
So it's a hydraulic high lift jack for 4x4 vehicles?
Yes 👍
The 3500-year civilization of Persia
Bale Ma inim !😃
@@HowToRestoration❤
Шпакля это уже лишнее...
Your support means the world❤️🙏
「樹齢」ってどういうことだよ(笑)
حرف نداری پسر 👏👏👏👏👏👏👍👍👍
That’s so kind of you🙏🙏
unpointing drill 😉
I’m so grateful❤️🙏
I think you mean Gordon Keeble?
I don't know much about this jack, if you have correct information about this jack, please email me or write me in the comments section so that I can update the information, thank you very much.
Good job bro👌👌👌
Thank you so much bro
Дуже гарна робота. ❤
So thanks bro❤️
Может пора обзавестись пескоструем???
Я скоро сделаю это сам !😁
Коммент в поддержку канала
Your support means the world❤️🙏
no way i'd trust that brazing repair to last. Strong as it may be, it'll fail again. That hook is much too weak. it's probably a fundamental problem with this design to begin with.
This jack is a collectible and has its place in the collection and is not supposed to work anymore. It is now retired.
👍🤗🙏🏻🇻🇪
❤️🙏
🇸🇪🇸🇪🇸🇪🇸🇪🤗🤝😊🤓😎🤩😁😀💯❤
I appreciate it❤️🙏
👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏a real beauty!!!
That’s so kind of you🙏🙏
Are you Persian?
Yeah bro
@@HowToRestoration that's awesome man
I saw that Iran Potk hamer 😁
You did well 👏👏
@@nature-agriculture-with-Esi 🤷🏻♂️
That’s so kind of you🙏🙏
Nice job. But there is something that doesn't work for me. The hook is made of cast steel and has probably undergone some kind of reinforcement. How can you weld welding steel to it??
This jack is not supposed to be used and should be kept in the collection because there are only 100 of them made in the world.
1966?
Yes
@@HowToRestoration but you told us it was a 100yrold jack..
@@efimkrivov Dear friend, it was imported to England from Switzerland on that date by a person named Harvey Frost.
This is an antique and I couldn't find any info on this jack on google or the rest of the internet!
The rubber handle is a dead give away this isn't that very old.
Зачем ?
Потому что всего их было сделано 100 штук.
Мне кажется что ногу шпаклевать и тем более красить это странная работа. Ведь по ней будет перемещаться механизм (зажим) и эта вся краска слезет очень быстро и начнет ржаветь, ведь этому домкрату дана вторая полноценная жизнь. А если не собирался использовать его по назначению то какой смысл был вообще реставрировать внутренний механизм для создавания давления? Ногу лучше было покрыть химическим воронением.
Так нарисовал производитель, а этот разъем входит в комплект и его использовать нельзя.
I want hand tool rescue he's better
Your support means the world❤️🙏
Question about the title: what is "svenska knekt"?
Apparently, he wants to translate the concept of Sweden into Swedish (Google Translate).
Other languages are translated by artificial intelligence, so it is not expected.
Gordon-Cable? Not Gordon-Keeble? I looked up Gordon-Cable but only found Gordon-Keeble which made just 100 cars from 1964 to 1967 (and had a seriously cool logo which featured a tortoise even though the Corvette-engined cars were actually fast, lol.)
Thanks
Tamir senaryosu çok kötü
I’m so grateful❤️🙏
Good job, but slightly over restored. As a lot of CZcams restorers do. Don’t use filler on a rough casting, takes the character away.
I myself am sensitive about this issue and I never want to destroy the originality of the product. The purpose of the filler is to make the piece look a little cleaner.
Interesting opinion, but that it is I feel it looks better.
I hate the rough casting especially rusted ones. So it's just personal opinions.
To jack up my 100 year old horse
Your support means the world❤️🙏
Странное движение напильником при обработке округлых поверхностей)
I’m so grateful❤️🙏
Great job " and keep using the filler"!👍😉
That’s so kind of you🙏🙏