Restoring a 100 YR Old Swedish Jack!

Sdílet
Vložit
  • čas přidán 19. 04. 2024
  • Hello, I hope you liked the video, a Nike 16HB Harvey Frost jacket
    This rather attractive jacket is actually made by Nike in Sweden. Imported to England for supply via Harvey Frost.
    It's described as a bumper jack, but apparently the lift arm fits perfectly into the square chassis tube.
    Offered with Gordon-Cable cars from 1964 to 1966 (100 cars).
    This antique jack was in the corner of the warehouse and I saw it was a good project for restoration, but I emphasize very much that it was very, very rusty. I separated the jack parts with difficulty and with the help of brake oil, the jack piston was stuck I took a lot of trouble to remove it from its place. After disassembling the jack parts, I washed them all well with detergent to remove any grease and then sandblasted them except for the jack cylinders.
    Sandblasting did not work and I put them again in a pan of rust removal solution for 24 hours and completely removed them with a wire brush. I will remove the part that has a chain and goes up and down along with all its accessories and start the restoration from this part. I do it, it got stuck and it was very difficult to start, all the screws were released with difficulty and with the help of brake oil. And I sprayed the red paint that is used for most of the jacks on them. I polished some of the parts and then I painted a layer of chrome on them with electrolytic nickel chrome.
    I opened and rebuilt the rest of the parts of my road that were very rusty with difficulty
    welcome. My name is Behnam and this is the How to restoration channel. My grandfather was a carpenter and my father continued to do the same, and since I have lived with tools since I was a child, I have a strong interest in them. I believe that old tools It should not be thrown away, it should be restored and used again. I believe that everything that is older and has been made before has a solid structure and is very durable and made with principles. All tools today are mass produced with very low quality. My way of thinking is that I was born in 1990 and I will leave the world once, so I do what makes me feel good.I haven't tested many tools yet and I want to reach them one day and my art. I will create with those tools. I earn from CZcams and if you want to support me in this way, I would appreciate it if you subscribe to my channel and follow the videos.
    Thank you for your support, dear ones.Support 👇
    / @howtorestoration
    #restoration
    #antique #how #diy #tool #rusty #rust #asmr #jack #rebuilding
  • Zábava

Komentáře • 151

  • @HowToRestoration
    @HowToRestoration  Před měsícem +20

    If you enjoyed the video, please like and subscribe to the channel for more videos. Thank you for your constant support❤️❤️

    • @user-rh4mi9iw1e
      @user-rh4mi9iw1e Před 20 dny +1

      😊😊😊😊😊😊😊😊😊😊😊😊

    • @andrewloakes6069
      @andrewloakes6069 Před 5 dny

      It said on the sticker Gordon Cable, the car was Gordon Keeble. It was a hand built upmarket car with an American V8, a grand tourer.

  • @ReverendSoupbone
    @ReverendSoupbone Před měsícem +5

    Fun restoration! A lot of different skills went into doing it and making it so nice in form and fiction.
    I don’t understand why people feel the need to “correct” someone on how they do this sort of work. This is how you wanted to do it and how far you wanted to restore/improve.
    Fantastic job!! Really enjoyed it.

  • @georgebrown8312
    @georgebrown8312 Před měsícem +5

    I have never seen a jack like that before. Splendid restoration job you did on that Swedish jack. It looks much better and it works like a charm too. Excellent work.

  • @scottcates
    @scottcates Před měsícem +5

    I enjoyed the brazing. Many restoration amateur hacks will weld cast iron, which creates majorly _reduced_ strength in the heat-affected weld zone. Nicely done here.

  • @YooToobz
    @YooToobz Před měsícem +2

    Some don’t like it, but I like that you use filler to smooth rough surfaces. The Jack itself lets you know it’s old so making it look as new as possible is great. Very nice work. Especially with making a new hook. Well done 👍

  • @MASI_forging
    @MASI_forging Před 6 dny

    Such a great restoration 👍👍

  • @vladimirtoshev5533
    @vladimirtoshev5533 Před 5 dny +1

    Перфектна работа. Браво.

  • @ajaychebbi
    @ajaychebbi Před měsícem +1

    Fantastic restoration

  • @scottcates
    @scottcates Před měsícem +2

    *Outstanding Video:* Good camera work and editing. The close-ups really stand out nicely.

  • @bodiejay2859
    @bodiejay2859 Před měsícem +1

    Beautiful restoration. I love it. ~Kevin

  • @marcelonavarta483
    @marcelonavarta483 Před 22 dny

    Excelente trabajo, mucha dedicación y precisión. Felicitaciones!

  • @okramw1
    @okramw1 Před 22 dny

    Some extremely good REPAIRS/restoration👏. I believe some have a problem with the word "Restoration" because of the difference in meaning between the words.👍

  • @williamstephens9945
    @williamstephens9945 Před 10 dny

    Yay, green oil

  • @adamw.20
    @adamw.20 Před měsícem

    ...Du machts echt perfekte sache in sachen restauration mit viel Liebe und besser wie Neu....👍👍👍

  • @oneshotme
    @oneshotme Před měsícem

    I very much enjoyed your video and I gave it a Thumbs Up

  • @guillermogalan5088
    @guillermogalan5088 Před měsícem

    Trabajo bien hecho. !!!!!!!!!

  • @daniloweifu9566
    @daniloweifu9566 Před 23 dny

    Sehr gute Arbeit. Ich finde löten oder verzinnen besser als Spachtelmasse. Aber egal, toll gemacht. ❤🤠🤘

  • @rycho662
    @rycho662 Před 12 dny

    Great job!!!!! The film is very well EDITED, but some general plans are missing. And a show of how this jack works would be useful. Greating from Poland.

  • @medina1251
    @medina1251 Před měsícem +1

    I have one that is fully funktionel in my shop,nice to see that im not alone,😀

  • @allffl3793
    @allffl3793 Před měsícem

    Cavolo è meglio del originale! Bravo.

  • @pavelkoudele5526
    @pavelkoudele5526 Před 24 dny

    6:17 Zatuhlý řetěz nejlépe vyčistíš ponořením do nafty, nebo do petroleje. Pěkná renovace zvedáku. Pavel 🇨🇿

  • @lennoxramberran1459
    @lennoxramberran1459 Před měsícem +1

    That is a masterpiece, great restoration, viewer from trinidad

  • @scottcates
    @scottcates Před měsícem

    Watching the fresh weld shrink at 9:06 is really interesting.

  • @kjellringstrom6217
    @kjellringstrom6217 Před 13 dny

    Newer heard them be called Knekt before. A Stövel Knekt is that thing you use to pull your bots of with. Where I live we would call that thing a Domkraft.

  • @Anode1kv
    @Anode1kv Před 25 dny

    Super top

  • @user-rz2xg3mo2g
    @user-rz2xg3mo2g Před měsícem

    Мастер ты красавчик 👍

    • @HowToRestoration
      @HowToRestoration  Před měsícem

      Если вы имеете в виду мой тип и одежду, я должен сказать нет, это противоположно тому, что вы думаете, и моя рабочая одежда маслянистая.😁😁🤷🏻‍♂️

    • @user-rz2xg3mo2g
      @user-rz2xg3mo2g Před měsícem

      @@HowToRestoration я имел ввиду то, что вы делаете своими руками.

  • @behnamshabgirnia1096
    @behnamshabgirnia1096 Před měsícem

    Nice work 👍👌

  • @AyazRestoration
    @AyazRestoration Před měsícem +1

    Great restoration

  • @rod1001
    @rod1001 Před měsícem

    Molto bello! 👍 cosa usi per annerire il gancio?

  • @TheStig1961
    @TheStig1961 Před měsícem +1

    Good restoration. By the way, made in Sweden. Closer to me😊. Regards Stig Österberg from Dalsbruk in Finland.

  • @bandplop6162
    @bandplop6162 Před měsícem

    Hortlot bei Guss, Stahlblech kann man auch mit Acetylen/Sauerstoff schweißen, braucht eine sehr kleine Spitze.

  • @kabinetshabgirnia5381
    @kabinetshabgirnia5381 Před měsícem

    Well done 👍

  • @user-sk3ww9bh2h
    @user-sk3ww9bh2h Před měsícem

    So nice 👍

  • @user-gv4tn9nb7f
    @user-gv4tn9nb7f Před měsícem +1

    Perfect❤

  • @pierrebonneau7785
    @pierrebonneau7785 Před 28 dny +1

    COMME TROP SOUVENT UNE FOIS LA RESTORATION FINIE?ON NE PAS A QUOI CELA SERT.....

  • @behnamshabgirnia1343
    @behnamshabgirnia1343 Před měsícem

    so nice video

  • @paoloantolini6890
    @paoloantolini6890 Před 6 dny

    Bravissimo ma ti faccio una domanda. Dove hai trovato le parti in gomma? Credo sia stata la cosa più difficile.

    • @HowToRestoration
      @HowToRestoration  Před 6 dny

      I left the rubber parts and packaging to my friend and he did it for me.

    • @paoloantolini6890
      @paoloantolini6890 Před 5 dny

      Sarebbe interessante capire come ha fatto a realizzarle, soprattutto quella del pistone che ha un profilo molto particolare. Grazie per la gentile risposta

  • @andrealves9786
    @andrealves9786 Před 22 dny

    top;...!

  • @sergioeduardocancionlillo2610

    Ese gato lo traían los for y chevrolet del 70

  • @jasonsummit1885
    @jasonsummit1885 Před 28 dny

    So it's a hydraulic high lift jack for 4x4 vehicles?

  • @joshthecomputertech
    @joshthecomputertech Před 27 dny

    "If it's Swedish, it's still broken." - Finland 😂

  • @user-fg3hn3bc1y
    @user-fg3hn3bc1y Před měsícem

    Необычный инструмент удача что он попал именно к вам 🎉

    • @HowToRestoration
      @HowToRestoration  Před měsícem

      Удача, должно быть, приняла меня за кого-то другого!

  • @salvadorblascogonga8204
    @salvadorblascogonga8204 Před měsícem

    Estas son herramientas que cuando el que las usa lo despiden, se va de la empresa o se jubila las arinconan por que nadie sabe manejarlas bien. Y es una lastima que no sigan en servicio.

  • @PRO-nm7gp
    @PRO-nm7gp Před 15 dny

    Шпакля это уже лишнее...

  • @user-dy1vz7zg5c
    @user-dy1vz7zg5c Před měsícem

    Дуже гарна робота. ❤

  • @SuperMario9988777
    @SuperMario9988777 Před 9 dny

    Может пора обзавестись пескоструем???

  • @8oho8
    @8oho8 Před měsícem

    Good job bro👌👌👌

  • @andrewloakes6069
    @andrewloakes6069 Před 6 dny

    I think you mean Gordon Keeble?

    • @HowToRestoration
      @HowToRestoration  Před 6 dny

      I don't know much about this jack, if you have correct information about this jack, please email me or write me in the comments section so that I can update the information, thank you very much.

  • @Jerry1664Bnez
    @Jerry1664Bnez Před 23 dny

    unpointing drill 😉

  • @ak-rc7eq
    @ak-rc7eq Před 11 dny +1

    「樹齢」ってどういうことだよ(笑)

  • @junkname9983
    @junkname9983 Před 15 dny

    no way i'd trust that brazing repair to last. Strong as it may be, it'll fail again. That hook is much too weak. it's probably a fundamental problem with this design to begin with.

    • @HowToRestoration
      @HowToRestoration  Před 15 dny

      This jack is a collectible and has its place in the collection and is not supposed to work anymore. It is now retired.

  • @JoseContreras-ph6nz
    @JoseContreras-ph6nz Před měsícem

    👍🤗🙏🏻🇻🇪

  • @user-iy1dx9sv2e
    @user-iy1dx9sv2e Před měsícem

    حرف نداری پسر 👏👏👏👏👏👏👍👍👍

  • @user-bo2zq4pq2u
    @user-bo2zq4pq2u Před měsícem

    Nice job. But there is something that doesn't work for me. The hook is made of cast steel and has probably undergone some kind of reinforcement. How can you weld welding steel to it??

    • @HowToRestoration
      @HowToRestoration  Před měsícem +1

      This jack is not supposed to be used and should be kept in the collection because there are only 100 of them made in the world.

  • @rogerpatrongonzalez5800
    @rogerpatrongonzalez5800 Před měsícem

    👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏👍🥃👏a real beauty!!!

  • @prostosilver8834
    @prostosilver8834 Před měsícem +1

    Коммент в поддержку канала

  • @rugickgame6052
    @rugickgame6052 Před měsícem

    Зачем ?

    • @HowToRestoration
      @HowToRestoration  Před měsícem

      Потому что всего их было сделано 100 штук.

  • @IZSIBIRIYA77
    @IZSIBIRIYA77 Před 21 dnem

    Мне кажется что ногу шпаклевать и тем более красить это странная работа. Ведь по ней будет перемещаться механизм (зажим) и эта вся краска слезет очень быстро и начнет ржаветь, ведь этому домкрату дана вторая полноценная жизнь. А если не собирался использовать его по назначению то какой смысл был вообще реставрировать внутренний механизм для создавания давления? Ногу лучше было покрыть химическим воронением.

    • @HowToRestoration
      @HowToRestoration  Před 21 dnem

      Так нарисовал производитель, а этот разъем входит в комплект и его использовать нельзя.

  • @efimkrivov
    @efimkrivov Před měsícem

    1966?

    • @HowToRestoration
      @HowToRestoration  Před měsícem

      Yes

    • @efimkrivov
      @efimkrivov Před měsícem +1

      @@HowToRestoration but you told us it was a 100yrold jack..

    • @HowToRestoration
      @HowToRestoration  Před měsícem

      @@efimkrivov Dear friend, it was imported to England from Switzerland on that date by a person named Harvey Frost.
      This is an antique and I couldn't find any info on this jack on google or the rest of the internet!

    • @84Tysken
      @84Tysken Před 10 dny

      The rubber handle is a dead give away this isn't that very old.

  • @neilhaas
    @neilhaas Před měsícem +1

    🇸🇪🇸🇪🇸🇪🇸🇪🤗🤝😊🤓😎🤩😁😀💯❤

  • @nature-agriculture-with-Esi

    Are you Persian?

  • @michaelprochaska6907
    @michaelprochaska6907 Před měsícem +1

    Gordon-Cable? Not Gordon-Keeble? I looked up Gordon-Cable but only found Gordon-Keeble which made just 100 cars from 1964 to 1967 (and had a seriously cool logo which featured a tortoise even though the Corvette-engined cars were actually fast, lol.)

  • @84com83
    @84com83 Před 26 dny

    Question about the title: what is "svenska knekt"?

    • @HowToRestoration
      @HowToRestoration  Před 26 dny

      Apparently, he wants to translate the concept of Sweden into Swedish (Google Translate).
      Other languages ​​are translated by artificial intelligence, so it is not expected.

  • @user-rk1bf4eh2p
    @user-rk1bf4eh2p Před 11 dny

    I want hand tool rescue he's better

  • @lostcabrio
    @lostcabrio Před měsícem +17

    Good job, but slightly over restored. As a lot of CZcams restorers do. Don’t use filler on a rough casting, takes the character away.

    • @HowToRestoration
      @HowToRestoration  Před měsícem +7

      I myself am sensitive about this issue and I never want to destroy the originality of the product. The purpose of the filler is to make the piece look a little cleaner.

    • @zeitlerusmc
      @zeitlerusmc Před 20 dny +1

      Interesting opinion, but that it is I feel it looks better.

    • @weiwang9622
      @weiwang9622 Před 11 dny +3

      I hate the rough casting especially rusted ones. So it's just personal opinions.

  • @mandirali42
    @mandirali42 Před 14 dny

    Tamir senaryosu çok kötü

  • @user-rk1bf4eh2p
    @user-rk1bf4eh2p Před 11 dny

    To jack up my 100 year old horse

  • @borodatipizdat
    @borodatipizdat Před 12 dny

    Странное движение напильником при обработке округлых поверхностей)

  • @phildivirgilio6286
    @phildivirgilio6286 Před měsícem

    Great job " and keep using the filler"!👍😉