Printing with Polypropylene or PP Filament
Vložit
- čas přidán 28. 12. 2023
- Printing with polypropylene can be tricky; it requires different tape and glue than what you normally use. My tests were performed on Bambu Lab P1S and X1C.
👍 Magigoo PP Glue amzn.to/48xIOIQ
👍 Eryone PP Filament amzn.to/3TKlqng
Reprapper PP Filament amzn.to/3TDvheH
Braskem PP Filament amzn.to/48fvhWK
👍 Scotch Extreme Box Tape amzn.to/3vkVFjl
Find some of our designs on:
- makerworld.com/en/u/1887656398
- www.printables.com/@V3Precisi...
Do you need short run production parts?
Do you need some prototypes?
Visit us at:
- V3Precision.com
For more Designs and 3D Printing, Visit us at:
- www.V3Precision.com
- / v3precision
- / v3precision
👍👍Help me keep this channel alive! Any donation is priceless and greatly appreciated!
www.buymeacoffee.com/v3precision
Become a Patron! Help me build the channel and I will share some design work. - / v3precision
As an Amazon Associate I earn from qualifying purchases with no extra cost to you.
#3dprinter #3dprinting #fusion360 #slicer #bambulabstudio #orcaslicer #design #polypropylene - Jak na to + styl
Really great info mate, thank you.
What sized hardened steel nozzle did you convert your printers to?
Instead of the „regular“ PP Packing tape, i use a adhesive Bookcover film. This also often made of PP, and its about aviable as a30cm*5m roll , so its much easier to cover the printing plate.
I like the Filament One Premium Pro Select PP and Braskem Glass Fiber PP. They print well on my Ender 3 Pro w/.8mm Nozzle X and on my E3 S1 Pro w/.5mm Nozzle X. 230/90 .2mm LH, 45-80mm/sec on smooth PEI with Magigoo PP. Beautiful, slippery(non GF), lightweight, semiflex parts. The GFPP has a really "grippy" texture to it.
@Jynxx_13 Didn't FilamentOne go out of business a couple years ago?
for the adesion I've solved with a doblesided tape but with the distorsion of the base I'm still fighting.
I'm using Treed filaments (PLENE4 and 5).
So, do you think that the inox noozle makes the difference?
Or the brim?
Or the printer?
What's has been the real jump to succed?
Do you have your overhang fan threshold and fan speed flipped? I see 90% fan speed overhangs greater than 10%. Did you mean to set 10% fan speed for overhangs greater than 90%?
But you know the trick with the clear adhesive tape for parcels, for example. I only use it on the corners where there is a lot of warping. Then PP also holds well. Only set the print temperature bed to zero for the first layer.
if you not brass nozzle you need more temp like +20 Celsius the same results ,you think print the right temperature but not
Ah... yes. Good info, dude. I just asked myself: Will there be any way to go, walk or run to get that warping done? And then: I cant show you as we shipped already. Ah, hooh. You may bee have taken a picture of the final product? The thing is you took us with your ideas and issues, but not with your success. You could dare to show the whole story..... then all your telling becomes a way more believable. Cheers
German company "PP Print" makes print surfaces. You gotta have a business though.
PP and P1S… who the hell comes up with these names?
Im researching about PP and you seem like a nice guy but the video is too long. Needs to be more edited.