This is really cool, I grabbed one of the Deathwing terminators boxes before they were removed from the store and wondered if the arms would fit with the new generic terminators, this may have convinced me to try a kitbash too.
These look great! One thing I've seen others do when sculpting with green stuff, is to use isopropyl alcohol on a brush for smoothing out the imperfections. Apparently, that'll dissolve the top layer better than water does, so it cleans up small inconsistencies really well.
First time ever I am actually thinking of starting a marine army, Primaris stuff looks... really good. I'm thinking Salamanders, they are the only lore I REALLY like when it comes to marines.
Great video again! Your camera work is getting sharper and the videos are really concise and to the point. The music is also a good choice, soothing but not overwhelming, perfect. Looking forward to seeing more.
The yellow stuff that didn't mix because it probably cured. The yellow part is the epoxy and blue one is a hardener. It is very common occurence for the yellow and usually you have a bit more yellow than blue to compensate and what you separate from the good part of yellow to mix (it's easier to do it before). That being said, you did a great job and they look very, very nice. I also like how it makes him less hunched over, since that is like the only thing I am not 100% sold on terminators as of now.
I really don't understand how greenstuff is to how like this for how long its been around, and how popular it is. Its crazy, even new packs will have a cured outer shell :/
@@actualwafflesenjoyer I'm aware, but that's not what I'm talking about. most green stuff cures a little without being mixed, developing a hard shell that doesn't mix well. Every single pack of it I've brought has been like this, and I've recently heard squidmar complain of the same issue, so it's not just me getting weird batches or storing it wrong
Nice work man, love the Glow up on the Sgt and 2IC⚡⚡⚡ - You should take a look at the Heroes Terminators too, they scale pretty well next to the new Levi ones if you want more variation for future Archangels
Great work. So the chest piece is a little larger in Leviathan terminators. The arch above the head as well? As for Blood Angels - I thing the sergeant should have black pauldrons.
The yellow in ur green stuff isn't down to how well it's mixed but as it's been sitting in it's plastic wrap the yellow part has had a reaction to the plastic and harded
using greenstuff without the gloves would probably help you :) the water and how it feels unless there is some other reason you use gloves. I understand not wanting glue/paint on your hands. is it just easier leaving them on?
This is really cool, I grabbed one of the Deathwing terminators boxes before they were removed from the store and wondered if the arms would fit with the new generic terminators, this may have convinced me to try a kitbash too.
These look great!
One thing I've seen others do when sculpting with green stuff, is to use isopropyl alcohol on a brush for smoothing out the imperfections. Apparently, that'll dissolve the top layer better than water does, so it cleans up small inconsistencies really well.
I’ll certainly give that a try next time, thanks for the tip :)
First time ever I am actually thinking of starting a marine army, Primaris stuff looks... really good. I'm thinking Salamanders, they are the only lore I REALLY like when it comes to marines.
Salamanders are probably my favourite chapter, I’d say go for it!
Great video again! Your camera work is getting sharper and the videos are really concise and to the point. The music is also a good choice, soothing but not overwhelming, perfect. Looking forward to seeing more.
Thanks for the feedback brother, glad you like em :)
Those look fantastic! Well done! That was really gutsy chopping off the chest pieces and gluing on the old Blood Angel ones, mad respect.
The yellow stuff that didn't mix because it probably cured. The yellow part is the epoxy and blue one is a hardener. It is very common occurence for the yellow and usually you have a bit more yellow than blue to compensate and what you separate from the good part of yellow to mix (it's easier to do it before).
That being said, you did a great job and they look very, very nice. I also like how it makes him less hunched over, since that is like the only thing I am not 100% sold on terminators as of now.
I really don't understand how greenstuff is to how like this for how long its been around, and how popular it is. Its crazy, even new packs will have a cured outer shell :/
@@actualwafflesenjoyer I'm aware, but that's not what I'm talking about. most green stuff cures a little without being mixed, developing a hard shell that doesn't mix well.
Every single pack of it I've brought has been like this, and I've recently heard squidmar complain of the same issue, so it's not just me getting weird batches or storing it wrong
the use of bladeguard shield is something I was waffling on with my own leviathan terminators, so it's good to know that they look good
BA assault terminators are such an amazing sculpt, they only need upscaling
Couldn’t agree more, brother
Nice work man, love the Glow up on the Sgt and 2IC⚡⚡⚡ - You should take a look at the Heroes Terminators too, they scale pretty well next to the new Levi ones if you want more variation for future Archangels
Thanks man, I do love those hero terminators
2:00 bro was not holding back
these look awesome.
Very good you enjoy :)
Bro those look amazing
Thanks Brother :)
if youre ever worried color wise on the heraldry, i find that purple blood drops look great as an accent to the red armor
These go extremely Hard. Great job!🔥
I wonder though, can you try recreating the Gorgon Pattern Terminators? Using the new Leviathan termies ofc
I will be doing something very very similar in the future!
Great work. So the chest piece is a little larger in Leviathan terminators. The arch above the head as well?
As for Blood Angels - I thing the sergeant should have black pauldrons.
Thanks to he that Him on Earth for paints and primer to cover the rough stuff
That 2IC looks like one bad mfer! That paintjob is wicked the way
The yellow in ur green stuff isn't down to how well it's mixed but as it's been sitting in it's plastic wrap the yellow part has had a reaction to the plastic and harded
Silly me, thanks for letting me know brother!
Actually for some reason terminators have their chapter badge on the right unlike the rest of their brothers who have it in the left
It's because the Crux Terminatus takes priority on Terminator armor; loyalty to the Emperor above Chapter. Same thing with Deathwatch
Yeah that’s true I think 1st company vets do take the crux on either shoulder tho
👏👏👏!!!!
Such an underrated channel, do deathwing knights !
Wish the leviathan termies had more dynamic legs and poses to do you great work justice - well done regardless!!
When I get better with green stuff I’ll have to try reposing them, I’m glad you enjoy though!
I play guitar as well so get additional armour from my calluses though modelling knives have proved their equal before
Hi, great stuff! You painted them exactly how I want mine to look, could you please share your recipe for the armor?
I may do a painting video in the future, stay tuned if you wanna see it!
@@ConversionBeam Awesome!
using greenstuff without the gloves would probably help you :)
the water and how it feels unless there is some other reason you use gloves. I understand not wanting glue/paint on your hands. is it just easier leaving them on?
Gloves only come off for the onlyfans pal, but you are absolutely right
@@ConversionBeam -_- that is not why I said it...