VW EOS - How to Remove and Replace the Hydraulic Pump Unit
Vložit
- čas přidán 23. 08. 2024
- Klaus of Top Hydraulics shows you how to remove and replace the hydraulic pump unit on the Volkswagen EOS convertible.
VW P/N: 1Q0871791C
More videos on hydraulic cylinder removal and replacement, troubleshooting, and switches and sensors are coming soon!
Click here to visit our order page:
www.tophydraul...
![►VW EOS◄ Kühlwasserverlust - Fehlersuche [Coolant water lost... troubleshooting] ◢WERKSTATT-TV◣](/img/n.gif)
I just finished replacing the pump with your pump and it fuckin worked perfectly! Thank you!!!!!!! You just saved us $4000 from what the dealer was quoting us!❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Congrats and thanks for letting us know!
Outstanding work producing this video Klaus! What a great service to our community. Thank you!
Klaus, I love you man ❤️ VW quoted £2240 to fix, did it myself for £140 🙌
Congratulations on doing the pump replacement yourself!
Where can I buy a pump
@@andresinclair7219 www.tophydraulics.com/53-vw-eos
We just got quoted 5000 so I’m really fucking glad to have found this video!
Excellent video! More instructions on troubleshooting the Eos roof would be much appreciated! Thanks
Fab video, thanks a lot. Did the job today, a bit tricky getting to some of the screws which needed some patience, but roof works a dream. Much appreciated and you will be my first port of call for a pump in future.
instablaster...
I was quoted £2k by the local VW dealer and charged £60 for the diagnosis. Why won't local independent garages touch this pretty straight forward repair ? Great video!
Just due to needing second hand parts, genuine Vw would most likely be like £1000 where as sourcing a working part & guaranteeing it may need 2/3 at £250 each
Thanks so much,you're great,
Good video, bookmarked if i need you in future , thanks 👍🏻
Thx for this useful video. I appriciate itt.
Thank you very much!
This pump looks quite similar to the Mercedes CLK w209. Do different car companies use the same pump?
Thanks for asking. The EOS pump is unique and it can only be replaced by an EOS pump. Pumps for modern convertibles never interchange between different brands unless one brand owns the other brand and they use virtually the same top for different cars.
Hello,
I saw that for other vehicles you have made some videos for manual roof operation.Is it also posible to have one for an Eos?Is there some sort of documentation available with all the steps to be followed?Thanks
i have a problem with my sunroof of the eos
the cables are stuck!! and the motor turns in place is there a way to resolve the problem
That pump is it for steering wheel or top convertabble of the car
It’s the convertible top pump.
Grate video thank you 👌
I have a Chrysler 300M and it's telling me I need to replace my hydraulic pump but I don't know where it's located on my car I NEED HELP
Do you need to purge the system of air after install and fluid fill?
Thanks for asking. While the system is theoretically self venting, there can be some complications if you had a leak before. Three scenarios:
1) Only the original pump was bad and the fluid level in its reservoir was above the minimum marker before you took it out, you ordered a replacement pump from Top Hydraulics. We ship the pumps filled with fluid such that there should be no venting (air purging) required - simply plug and play.
2) You purchased a second hand pump somewhere, hoping that it will last a while. That's okay (if you don't expect the pump to last a long time) as long as you fill the pump before you install it and try to get as much air out of it as you can before running the system.
3) You had a leak in the system and the cylinders already had air in them. There is a chance that you will have to manually cycle part of the top in order to help the pump with getting all air out of the system. We can guide you through it if needed.
How can I test if it's the pump or the cylinders are the source of the problem of why my roof won't open/close?
Typically, the pump fails long before the cylinders do. The first step is to check whether the pump motor is running when you push the button. If it isn't, then check whether the pump has been sitting in a wet housing for a long time and corroded.
I want to buy your product. I need a replacement pump for 2008 eos. How do you loosen the rear trim panel? In the video you already have it loosened. I can't seem to loosen the panel to get to the pump.Please help
Hmm. I would suggest making sure the weather stripping is not holding down the panel, then pulling up harder.
Thanks so much Klaus, do you know where to ship this Hydraulic Pum punit for an EOS 2006 with economic price ?
Thank you
Thanks for asking. Where are you located?
@@TopHydraulics In France. Another question : do you think that the message "error, no convert operation" could be because of lack of oil into the pump ?
@@tmarzloff The only company who properly rebuilds these pumps is Top Hydraulics in the USA. Shipping from us to Paris, for example takes two to three days via FedEx International Priority and currently costs US$90. For economical shipping from France to the Us, you may want to check with La Poste and with DHL. The pump weighs a little over 4kg.
"Error, no convert operation" can be caused by a few things, very frequently by water intrusion in the trunk damaging the pump. The fluid level being low will not give you this error message if the top previously completed the opening and closing cycle. Fortunately, the fluid level is easily checked...
@@TopHydraulics Ok many thanks to you
Replaced the pump, all windows except for the drivers side rear go down. That window stops about half way. Sunroof opens, but nothing else happens. Once sunroof opens, I get an error code on the dash and says close top. I made sure all wires were connected correctly. Any ideas?
Bummer about the driver side rear window. If one window does not move as far as the others, then the computer will not move the top.
good evening I wanted to ask if this motor pump only activates the opening system or is also used for the sliding of the roof? the roof of my eos struggles to slide and the motor located under the sky has ruined the nylon gear inside. I wanted to know if this pump has something to do with it I have another defect? thank you
Thanks for asking. The pump does not move the sunroof portion on your top.
@@TopHydraulics grazie. My roof struggles to slide and the scooter has worn out the nylon Gear . Replaced. But manually the roof Is hard in sliding . Could there be a further problem?
I'm afraid the same thing Will happen again. Once reassembled do i have ti have It programmed?
hello I replaced the nylon pulley of the motor. the sliding roof started working again. I did the reset but he no longer opens the hood. the trunk opens the sliding roof goes back ... the rear window goes up ... all the flaps open .... but it does not unhook the uprights .... and it tells me system error. I had the auto electrician check it and he told me that there are no errors. how is it possible?
How much for the replacement pump, and will I be able to manually put my top down after removing the pump? I have the 2008 EOS.
Thanks for asking. Pricing for the pump is on our website: www.tophydraulics.com/53-vw-eos
You can either send us your pump first, then we rebuild it, then we ship it back to you, or you can get one from our inventory first and later ship back your old pump to recover the deposit.
We will be publishing videos on truly manual top operation (without using the pump) shortly. This should only be done in emergencies, as it takes four people to lift the top again manually when you want to raise it without the help of the pump.
We have added videos on manually opening and closing the EOS top a few days ago, hope they will help you. Here is our EOS video playlist: czcams.com/play/PLly4CMbpk7owzfP_9y5y39cLUtDHDudzw.html
@@TopHydraulics ok, thank you. I've already visited your website but didn't realize you had them in stock. I will go back and look again, but before I can even access the the pump, I need to be able to manually shut the top. It's partially opened right now, making it extremely difficult to reach the pump. A video on this will be greatly appreciated. Once I'm able to remove the pump, I will order from your inventory.
@@PhillipDavisMarketingSolutions Here is our step-by-step video on manually opening the top: czcams.com/video/xMb7Ne44uWI/video.html
Here is our step-by-step video on manually closing the top: czcams.com/video/G31I3ZUxIBQ/video.html
Good video but wich oil I can used for
Where are you located?
France / Lyon
@@MohamedSalah-bg9qg In France, it should be easy enough to get Volkswagen fluid. Otherwise, use Mercedes fluid 0009899103
Thank you
@@MohamedSalah-bg9qg VW recomends in the service manual VW G 002 000 Zentralhydrauliköl / central hydraulic oil
HI where do you buy these HYDRAULIC blocking caps to change over the pump
Don't know where to send you. It took us a while to find the proper size and now we have them made in batches of 15,000...
My EOS has 2 plastic screws behind the emergency triangle, so better check out for these before ripping the plastic apart...
Good to know! Maybe those were already missing in the EOS that we used for the videos...
👌
The hydraulic hose are hard to get out
That can happen if you have a lot of corrosion on the pump. Try to wiggle the fittings and pull harder...