Chemical dipping a Classic 1936 Ford Pickup Truck Cab
Vložit
- čas přidán 17. 02. 2023
- Chemically removing all the paint and rust off this 1936 ford pickup truck cab prior to a restoration.
For Collabs and sponsorships- trevormalloy2121@yahoo.com
#ford #pickup #pickuptruck #classictruck #truck #trucks #Motoring #Automotive #CarGuy #MotorSport #ClassicCar #TopGear
#oddlysatisfying #clean #cars #car #classic #classiccars #chemicaldipping #acid #alkaline #restoration #powerwashing #classic #paint #rust #restoration #transformation - Auta a dopravní prostředky
This video was in the works over a month ago before I started posting long form videos on CZcams. I have one more after this that is in portrait but it’s not a car. I had a hopper of edited videos for the other platforms. Now I will be posting current projects that will be in landscape
🍺
Sick! Thank you so much.
This was the one thing I didn't like about your videos
Pk0007p lom. Hb
A ll
Tmm
Can you tell me where that (what appeared to be) plastic breather tube was connected to when the shell went into the acid bath? Will be MUCH better in landscape - thanks - HA - you read my mind. CHEERS from AUSTRALIA.
@@geneva760 it’s an air siphoning rig I use to get air pockets out as the cab is lowered
As a car guy I can't believe how oddly satisfying this is to see virgin steel come through under all the years of paint, bondo and rust. Keep 'em coming from a sub in Michigan where we know all about rust on old cars...
I find these videos to be oddly relaxing, I can also recomment specialty sawmills sawing exotic logs into boards.
Watching the grain appear and change slice after slice is also very calming.
I love these videos! So much of a vehicle's history and truth being revealed in such a short time - wrecks, patches, rust, you name it. Keep up the great work!
This is absolutely the only way to
Properly restore a vehicle. An absolutely clean canvas to repair or replace any damage. Totally eliminating rust and making the vehicle completely new again. Truly a work of art to do a proper car build.
I enjoy these videos, it's surprising what lies beneath the paint on some cars and seeing older repairs and metalwork. Can you do a video explaining how much shop clean up there is after you have pressure washed a body, and how often you need to change the dip tanks.
Wow! That is beautiful. Right on. 1936 Dang. Good job. Looking forward to seeing the VW Bus, I love my buses.
Absolutely fantastic!!
Thank you for sharing
Messy but satisfying! This cab appears to be in pretty good shape.
Hopefully some of your customers will send you pictures and videos of them once the bodywork and paint is done (or the whole job), but it may take a couple of years for them to reach that point.
The only thing I liked less than the other videos iis when you blast off the old paint. It was done kinda quick I enjoy watching all the old paint flying off. It makes me appreciate the final project all the more. I'll same the same for the rust removal.
As a auto enthusiast I enjoy your videos
Already subscribed.
Great job!
I find your videos to be very interesting, but I will be happy to see future ones in a horizontal format so that we can see greater detail. I have a '65 Buick Skylark project and a '71 VW Bus I'd like to have you clean up if I ever get the chance to restore them. Thanks for putting these videos out for us to watch.
Nice to see something from the 30's that hasn't had the top chopped. Hopefully this restoration stays stock and we can see the finished product
great video
Why are these videos so oddly satisfying??
Keep making the videos....I LOVE IT!!
I love to watch your videos. That woluld be great to see a photo of the final painted chassis. Not the final totally assembled car, because it takes years.
Looks amazing! Can we see the clean up after? Worked at a glue and solvent company back in the day and the once a week cleanup we did was work but satisfying.
Good video.
This is more fun then watching cars bring crushed
Lol I’m glad you enjoy it!
I get so pumped up I want to start sanding it when you're done LOL
Nice job!
amazing 😮
Cool video, oddly satisfying.
It would be great to see the finished restoration after it’s all done
I love this its fun to watch
These videos are incredible! I enjoy watching the beginning of the transformation of these classics. I really hope and pray when this beautiful old girl gets rebuilt, that the owner does not destroy this beautiful truck by chopping channeling etc, ruining the look. Making it a hot rod is one thing, but please be respectful if the classic looks... or restore it to show room new.
Very solid truck
I don't think you owe everyone a response to their comments. Life is short and you are busy. I have noted the same questions coming up pretty frequently on these videos so maybe a pinned comment or some quick explainer text over videos (easy? hard?) to get those out of the way might lighten the load a little. Always fun to see what is revealed in these videos. Thanks!
How much does this typically cost?
My friend we really enjoy your videos...
man i like your dips! 😂
Looking forward to the VW Bus. One of my favorite vehicles ever.
I'll bet the EPA would love you guys
I would love to have my truck tanked before I start the bodywork...where are y'all located?
Awesome content. Have you done motorcycles?
3:05 "Turpentine, Acetone, Benzene. He calls it the dip" Sorry my 90s brain and Roger Rabbit kicked in at this point 😂
Didnt you say you wouldnt record portrait again before? Ha nice content anyway. 🎉
This video was shot before that but not finished yet. I have one more video that’s in portrait but it’s not a car. These videos are sometimes shot over two months time. I haven’t even been doing CZcams long form videos for two months yet. All new stuff will be in landscape
Can u post video of restorarion this truck ?
Where are you located at ?
I have a 1965 Plymouth Belvedere 2 that I would like to get dipped it has some rust but not to bad but how much dose this cost just rough estimate without seeing it ?
Thanks for posting these video's so keep them coming Tim
Hi, how are you? I thank you for this video and I really need to learn how to clean the machine this way.
What is the material used it?
What protection gear do you wear when you spray?
Where can I have this done to my 35 Ford pickup?!?
Ahh you tricked me into another vertical video
Once the car is done, how do you protect it from rusting?
I apply a rust inhibitor
Qual ácido usa para remoção?
What are the red plastic tags for ?
Красавцы делают историю из го на
How long do the ropes last?
I want my 1964 F-250 cab done. It would be a bonus to have the process filmed. How do I get in touch with you?
Very dangerous job all that acid smells 😳
Why did they leave the doors on?
Kinda surprised the owner just didn't leave the original car patina but to which his own
I’m not complaining but what happened to no more videos in portrait mode ?
I started this video over a month ago before I started CZcams. I have one more that’s in portrait but it’s not a car. Then I’m done.
@@minute_of_dangle
😏🧐
I have a doubt: if the operator makes some scratches over the paint with some abrasive Tool, It becomes easily and faster to the First chemical dipping penetrante and remove the paint?
Что за химические составы используются?
How much does it cost for your services
How often do you have to replace the chemicals in the tank? Seems the stripper tank would get nasty pretty often
We can spike it. Last tank lasted almost 5yrs
Curious, did you have MOA in mind when you came up with your channel name?
Yeah, that was the whole basis of it. Lol. Even though I’m a milliradian guy myself. I actually made the name before I even started working at the dipping place lol.
Landscape?
Does your company restore also?
No we just strip
How much does it cost to diplome vehicle
Why were the doors left on?
The customer decided he didn’t want to take them off.
What happens to the 'dip' once it is finished with? Where does it go? Isthe jetwash water or something else and what happens to the runoff?
We have a pit under the washbay that’s separate from our sewer drainage. The runoff is collected there. We then pump it out and filter it into evaporation tanks that have heat exchangers to evaporate all the water out of it. What’s left is a neutral sludge. We then pay a company who specializes in chemical waste disposal to dispose of it properly for us.
@@minute_of_dangle many thanks very interesting
Beautiful face!!!❤👍
Back when they used good metal
Hello How can I contact you?
братан как называется ета химя?
Wya
What is the name of your business off of CZcams like your incorporated business
I just work there but it’s 3schemicals llc
OK thanks for replying! I just bought a 66 GTO and eventually I'm gonna have to either rotisserie Blast it or have it dipped what state are you located in?
мужик ты красавец, привет из России!👍
1936 and little rust, why are modern cars not made to the same standard, they rust out in a few years now.
If you are gonna do videos, you should probably answer posts.
I do answer posts but it’s impossible to get to all of them. My one video alone has 2.5 thousand comments. On the other platforms I have videos with 5000 comments. It’s impossible to get to them all and I have a life and family outside of social media
Still filming in portrait for CZcams. !!!!
This video was in the works over a month ago before I started posting long form videos on CZcams. I have one more after this that is in portrait but it’s not a car. I had a hopper of edited videos for the other platforms. Now I will be posting current projects that will be in landscape
What will be the other platform? I'm addicted to watch your cleanings. 😂
@@sandorszeberenyi7361 Instagram, tiktok, and Facebook all minute_of_dangle
Show some footage of the underside , before and after of the vehicules getting dipped in landscape mode. 🙂
I've been a bodyman all my life and I love this shitt
Very good thanks very much LEMAYNELSON VACOUVERWASHINGTON NORTHWEST USA